or Connect
AVS › AVS Forum › Display Devices › Rear Projection Units › 2007 Mitsubishi WD-XX73X and XX831 Owner's Thread
New Posts  All Forums:Forum Nav:

2007 Mitsubishi WD-XX73X and XX831 Owner's Thread - Page 3

post #61 of 9409
Thread Starter 
Quote:
Originally Posted by xb1032 View Post

Basically two reasons. First, I'd rather have the black trim over the dark gray. Second and most importantly, HH Gregg will likely carry the 732 series. BB will probaly carry the 731 series and probably give 10% off while HH Gregg will discount around 20% off making the price of the two about the same. If HH were to carry the 732 73"er and the price is low enough that'd be the one I'd most be interested in.

Oh and by the way, if you want to reduce the noise on the Mits, certainly turn off Sharp edge or if you do turn it on turn the sharpness down a bit.

Thanks for the thoughts. The main thing I'll be trying to do is get rid of noise as that's why I didn't get the Samsung already so I'll do what you suggest. Any other suggestions as to tweaking the picture from the out-of-box settings?

Tv will be here btw 3.5 to 5.5 hours... (10 am to 12 pm AZ time)
post #62 of 9409
I feel like *I* am about to have something delivered to my house... I keep checking the clock.
post #63 of 9409
Thread Starter 
Quote:
Originally Posted by rsk View Post

I feel like *I* am about to have something delivered to my house... I keep checking the clock.

It'll be at least an hour until I get it and even then if I post anything it'll just be pictures of the chassis... I'm probably going to watch DVDs most of the day (don't have Cox HD yet), play with the settings, etc before I make any judgements. If the Sammy HLS sets are any indication, out of box settings can be expected to be poor so I'll be tinkering a lot.
post #64 of 9409
Quote:
Originally Posted by rsk View Post

I feel like *I* am about to have something delivered to my house... I keep checking the clock.

LOL
post #65 of 9409
I went to UE and BB Friday 6/17 and had each look up the
65731 in their computer system.
(UE actually had 57731 on the floor but terrible feed)
His computer showed 30 for delivery on July 3rd already had
a sales price listed putting it at just barely over 3 grand. WOW!
I'm in St. Louis so surely they should be poppin' up on the east
and west edges by then if not sooner....fyi
post #66 of 9409
Thread Starter 
Quote:
Originally Posted by schnide View Post

I went to UE and BB Friday 6/17 and had each look up the
65731 in their computer system.
(UE actually had 57731 on the floor but terrible feed)
His computer showed 30 for delivery on July 3rd already had
a sales price listed putting it at just barely over 3 grand. WOW!
I'm in St. Louis so surely they should be poppin' up on the east
and west edges by then if not sooner....fyi

The price is ridiculously cheap for the feature set. It almost seems too cheap - I felt like I was stealing the TV from them
post #67 of 9409
Thread Starter 
Still haven't gotten the call, could be looking at another hour or so until delivery (end of the delivery window)
post #68 of 9409
The default settings had too much color saturation for my taste. The picture was too bright as well. I asked the sales person, we changed to Movie mode and the PQ came right in line with what I prefer. Calibrated, I think this is a winner. If you give it a thumbs up, I expect to buy this set. Hopefully, I'll get them to throw in the stand for the sales price as 3 stores would be competing for my business and all share the same OneCall price.
post #69 of 9409
Thread Starter 
Quote:
Originally Posted by Ron Temple View Post

The default settings had too much color saturation for my taste. The picture was too bright as well. I asked the sales person, we changed to Movie mode and the PQ came right in line with what I prefer. Calibrated, I think this is a winner. If you give it a thumbs up, I expect to buy this set. Hopefully, I'll get them to throw in the stand for the sales price as 3 stores would be competing for my business and all share the same OneCall price.

Thanks for the ideas on the settings, I'll try those and see what I think.

I'll probably take some shots of the set today and then post initial thoughts tonight or tomorrow...
post #70 of 9409
Thread Starter 
Just got the call, set will be here in 10 minutes.
post #71 of 9409
nice!
post #72 of 9409
Quote:
Originally Posted by Ron Temple View Post

Calibrated, I think this is a winner.

That brings a question to mind...how do you calibrate a 6 color palette? DVE and Avia still utilize RGB calibration.
post #73 of 9409
Thread Starter 
Ok, I'm having trouble getting the website to take the images and I'm impatient so just download all of the zip files and the unzip...

DOWNLOAD ALL FILES BELOW

files are
Mits.zip
mits2.zip (MUST rename to mits.z01 )
mits3.zip (MUST rename to mits.z02)

Then extra. Sorry, I'm wasting too much time getting these pics up. Maybe someone else can repost the pics for me.
post #74 of 9409
Thread Starter 
post #75 of 9409
Thread Starter 
Mits2.zip MUST RENAME to above

 

mits2.zip 450k . file
post #76 of 9409
Thread Starter 
Mits3.zip MUST RENAME, see above

 

mits3.zip 145.87109375k . file
post #77 of 9409
Can't get the pics to work...renamed them and all..
post #78 of 9409
Ahh finally got it, the names were screwy, you have to rename #3 to "mits3.zip" then you have to rename #1 to "mits3.z01" and #2 to 'mits3.z02"


Jesus dude the TV looks awesome, the bezel is so freaking thin.

BTW rehosted here for viewing:
http://www.box.net/public/j31t3x6867
post #79 of 9409
OK....you're not fast enough with the review and we're impatient

Can you compare the set's noise level vs. the Sammy's ?... be honest now

Thanks
post #80 of 9409
The only thing I'm interested in is picture after picture of different movies and even standard def TV. pbm mentioned he doesn't have HD yet, so we can't ask for that, but I'm always most curious about "how does the TV do with real world content"

And yes, the noise issue is a curious one as well. That room also looked like it could be a lot brighter (open the blinds maybe?) and see how it still looks?

I think about 20 photos overall would be awesome if you had the time. I can host them on box if that's easier.
post #81 of 9409
Thread Starter 
Quote:
Originally Posted by rsk View Post

Ahh finally got it, the names were screwy, you have to rename #3 to "mits3.zip" then you have to rename #1 to "mits3.z01" and #2 to 'mits3.z02"


Jesus dude the TV looks awesome, the bezel is so freaking thin.

BTW rehosted here for viewing:
http://www.box.net/public/j31t3x6867

Thanks a ton for reposting the pics. I didn't know what to do with 'em.
post #82 of 9409
Thread Starter 
Quote:
Originally Posted by rsk View Post

The only thing I'm interested in is picture after picture of different movies and even standard def TV. pbm mentioned he doesn't have HD yet, so we can't ask for that, but I'm always most curious about "how does the TV do with real world content"

And yes, the noise issue is a curious one as well. That room also looked like it could be a lot brighter (open the blinds maybe?) and see how it still looks?

I think about 20 photos overall would be awesome if you had the time. I can host them on box if that's easier.

If you PM me your email address, I'll email you pictures to post.
post #83 of 9409
Thread Starter 
Quote:
Originally Posted by RudyMeister View Post

OK....you're not fast enough with the review and we're impatient

Can you compare the set's noise level vs. the Sammy's ?... be honest now

Thanks

Too early to tell yet... I want to be fair to both manufacturer.
post #84 of 9409
Thread Starter 
Initial thoughts... need to watch a few movies and tweak some more before I comment too much

The Good so far

- form factor (did you see the picture of me holding a quarter next to the bezel?). Amazing.
- no weird HDMI issues, it just works
- quiet as heck
- specs indicate the set accepts 1080p in 24hz, 30 hz, and 60 hz over HDMI

The Bad so far

- no optical out is irritating to me (!)
post #85 of 9409
Quote:
Originally Posted by pbmpharmacist View Post

The Bad so far

- no optical out is irritating to me (!)

Does it have coaxle out?
post #86 of 9409
Quote:
Originally Posted by pbmpharmacist View Post

- no optical out is irritating to me (!)

Why do you need optical out?
post #87 of 9409
Quote:
Originally Posted by pbmpharmacist View Post

Initial thoughts... need to watch a few movies and tweak some more before I comment too much

The Good so far

- form factor (did you see the picture of me holding a quarter next to the bezel?). Amazing.
- no weird HDMI issues, it just works
- quiet as heck
- specs indicate the set accepts 1080p in 24hz, 30 hz, and 60 hz over HDMI

The Bad so far

- no optical out is irritating to me (!)

This is exciting for me too! Can you talk about the PIP? Is it a 2 tuner built in PIP? I guess it takes a cable card to if you dont want to use a cable decoder box?
post #88 of 9409
Thread Starter 
Ok, I finished watching Gladiator. I'll be sending the pics to RSK after some dinner to post.

Impressions are positive but I did see a lot of rainbows (wife saw none). I would recommend checking out the 2007 Mits as they seem a LOT better than the Samsungs that I saw.... more later
post #89 of 9409
I just saw one of these at Howards in Southern CA and it did look very good(WD 57731). It was next to last years 73 and looked a lot brighter and less noise. A bigger screen, the 73 is huge, could account for some of the noise. I tried to compare to the SXRD but it had a different feed. The Mits looks as bright as the LCDs, brighter even.
post #90 of 9409
TV looks great! Where did you get the matching base? I'm not sure to get a 65731 or wait for a 65831. I have no idea when the 831 is coming out and how much better it will actually be.
Thanks,
Ryan
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Rear Projection Units
AVS › AVS Forum › Display Devices › Rear Projection Units › 2007 Mitsubishi WD-XX73X and XX831 Owner's Thread