AVS › AVS Forum › Audio › DIY Speakers and Subs › Pre-built sub enclosures.
New Posts  All Forums:Forum Nav:

Pre-built sub enclosures.  

post #1 of 12
6/19/06 at 7:40am
Thread Starter 
Besides Parts Express, what other place can I get a quality vented box for a SVS db12.2 Plus sub? The bigger the better. (4cu ft or more)
Or if someone would build me one for a reasonable price. Sonotube? I'm in the Pocono PA area.

Thanks

AVS Top Picks

post #2 of 12
6/19/06 at 8:59am
I too am in the same boat....I don't have any info for you but i would also like to receice the same info i live in the Cedar Rapids, Iowa area. I am looking to find or have built a 2.5 cft. sealed box for the Quatro 15" sub from P.E. . I was going to buy their 3.0cft. enclosure but they do not cut any holes for you. i still may go this route and give my jasper jig a go but i hate to spend that much money and screw up a quality finish. Thanks
post #3 of 12
6/19/06 at 11:22am
If you have a jig saw, you can make pretty good cuts with that and a compass. That's what I did with my sub, and the hole turned out pretty nice.
post #4 of 12
6/19/06 at 11:26am
Here's another coulple of potential sources;
http://www.acoustic-visions.com/~aco...rs/enclosures/

http://www.creativesound.ca/details....l=EZTUBESHIVAP
post #5 of 12
6/19/06 at 11:56am
Thread Starter 
Wow! Very nice links Bob! Exactly what I'm looking for.

Anymore? Keep them coming!

Thanks
post #6 of 12
6/19/06 at 1:29pm
Try Rawacoustics , pick the subwoofer link on the left. He makes cabs for the GR Research subs, but he will make anything you want. I made my own cabinet for a dual sub/pr from GR, and I love it.
post #7 of 12
6/21/06 at 1:09pm
your local cabinet shop should be able to whip one out given you have the plans for it
post #8 of 12
6/26/06 at 7:55am
Vitod....this is who i am going to have build my box wlinsell@comcast.net He will quote you a price on what you want built.
post #9 of 12
6/27/06 at 10:27am
Quote:
Originally Posted by dawg1161
I too am in the same boat....I don't have any info for you but i would also like to receice the same info i live in the Cedar Rapids, Iowa area. I am looking to find or have built a 2.5 cft. sealed box for the Quatro 15" sub from P.E. . I was going to buy their 3.0cft. enclosure but they do not cut any holes for you. i still may go this route and give my jasper jig a go but i hate to spend that much money and screw up a quality finish. Thanks
Get a Jasper circle jig and a plunge router. I am purchasing one next weekend to do my four sub cabinets. The jig is around $25 and the plunge router I will borrow from a friend of mine.

Cedar Rapids is a nice place. You got a nice jail there on the island. The food is good there. Although I don't suggest you try it. lol!!!
post #10 of 12
6/27/06 at 11:00am
Hmm, so the guys going with Sonos (especially prebuilt as I don't have skills to do myself), for the Db 12 drivers, what size/plans are you going with?
I ave a 16-46+ and a new 12.3 driver on the way (leaving me with my old 12.1)and would love to be able to buy a prebuilt sono enclosure(complete setup -minus driver) somewhere (if reasonable).
Would need 16hz tune to match my current 16-46 of course.
post #11 of 12
6/27/06 at 8:08pm
my3rdgen, have you ever tried the food where i work in Anamosa? LOL.....You are correct my friend runs that jail....Its alot better than when they called it Ellis Island........I do have a jasper Jig but how would i go about not messing up that fine finish ? Anyway i have a box in the making Thank You.
post #12 of 12
6/27/06 at 9:39pm
Quote:
Originally Posted by dawg1161
I do have a jasper Jig but how would i go about not messing up that fine finish ?
Not sure. I will probably have to figure that out when mine gets here.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: DIY Speakers and Subs
This thread is locked  

AVS Top Picks

AVS › AVS Forum › Audio › DIY Speakers and Subs › Pre-built sub enclosures.