AVS › AVS Forum › Home Entertainment & Theater Builder › General Home Theater & Media/Game Rooms › Sony DAV-DX255 speaker connections
New Posts  All Forums:Forum Nav:

Sony DAV-DX255 speaker connections

post #1 of 14
Thread Starter 
Hi,
I recently bought a Sony DAV-DX 255 home theater system for my media room. The media room was pre-wired for a home theater system. However, to my disappointment, Sony seems to use some proprietary connectors to connect to the A/V Receiver. . What are my best options to use my pre-wiring for the system? I looked around in Fry's etc for the connectors, but they said they didn't have them available. Any help would be much appreciated!
Thanks,
SG
post #2 of 14
There is a picture of the speaker connectors in the user manual:

http://www.docs.sony.com/release/I_Manual_dx155.pdf

They do indeed look like proprietary connectors. My guess is that you would not be able to purchase a connector like that. If you were to contact Sony Parts, they would probably only sell you the whole speaker cable.

I guess I would cut the supplied speaker cables and splice them to your pre-wiring. That should work fine as long as you make a good connection.
post #3 of 14
This is pretty easy. Looking at pg 15 of the pdf file, it shows you which is + and -. simply connect the + and - of the sony wire end to the + and - of the pre-wired end. You can either solder them together (my recommendation) or use those plastic electrical ends caps to connect the two.

Victor
post #4 of 14
Thread Starter 
Thanks for the suggestions! I guess I will have to just solder them to the existing pre-wire. I will let you know my findings.
Thanks!
SG
post #5 of 14
Realizing this response is a bit late, for others out there looking for a solution you can simply use 1/8" slide on speaker connectors that are used for car stereo speakers. The connectors fit on just right and will allow you to use much higher quality speaker wire than what Sony provides with the HTIB.

I initially ordered the Monster Cable HTIB-SV kit for Sony Dreamcast and Kenwood systems thinking the connectors would fit, but they're too big. But I can't complain because I picked up up for $30 including shipping off of eBay (retail is $79 at Fry's, Best Buy, etc...) and it included an S cable and 140 feet of speaker cable split up into 6 different cable lengths to for front, rear, center, and the subwoofer. And you can hear the difference in the sound using the HTIB Monster cable setup.
post #6 of 14
atlanta318ti,
recently I have also bought Sony DAV-HDX285 5.1 Channel Home Theatre system. Can you please tell me from where I can buy "1/8" slide on speaker connectors"

Thanks
post #7 of 14
I am in the same boat. Can someone advise where to get these connectors from?

Cheers.
post #8 of 14
Banana Plugs.
post #9 of 14
Until I get to three posts.
post #10 of 14
Sorry, all I wanted to do was post a hopefully helpful link, not clutter up the forum
post #11 of 14
ok, here is the link (I had to post 3 times prior to posting an url)

http://www.hometoys.com/htinews/jun0...ifi/cables.htm
post #12 of 14
Easy and fun!!
post #13 of 14
I don't mean to be bringing back old threads, but after some Google searching this was the best I came up with.

I really wanna connect this huge 12" subwoofer I have, but my DAV-HDX589W also has Sony's stupid plugs.

This is what mine looks like.
LL
LL
post #14 of 14
Meh? I gotta find out how to connect my subwoofer. I need earth quaking sounds in my room.
New Posts  All Forums:Forum Nav:
  Return Home
AVS › AVS Forum › Home Entertainment & Theater Builder › General Home Theater & Media/Game Rooms › Sony DAV-DX255 speaker connections