AVS › AVS Forum › Audio › Subwoofers, Bass, and Transducers › Official SVS Owners/Support Thread.
New Posts  All Forums:Forum Nav:

Official SVS Owners/Support Thread. - Page 331

post #9901 of 10624
Any Shielded RCA cable will do fine.

Here is a good read From Roger Russell of McIntosh.

http://www.roger-russell.com/wire/wire.htm

Athanasios
Edited by nashou66 - 2/6/13 at 7:48am
post #9902 of 10624
Quote:
Originally Posted by kerednai View Post

So what sub cables are people using with their SVS subs and are you happy with them?
I have always used component video cables (Liberty) with my dual cylinders, which have performed flawlessly.
post #9903 of 10624
I had the 3 meter SVS cable hooked up to my SB12...and it was of poor quality imho ....the pin broke off in the input when trying to remove it when I upgraded to the PB12
post #9904 of 10624
Quote:
Originally Posted by Brian Fineberg View Post

I had the 3 meter SVS cable hooked up to my SB12...and it was of poor quality imho ....the pin broke off in the input when trying to remove it when I upgraded to the PB12
Interesting. I was assuming their cable would be good quality so their customers get the most out of their sub. There are some good write ups on the Mediabridge Ultra Series sub cable so I'm going to give that a go.
post #9905 of 10624
These are the subwoofer cables we're currently employing to carry our fragile subwoofer signal. tongue.gif

Well constructed, professionally terminated, gold plated RCA ends and if you have a Prime membership, two day shipping is included.
post #9906 of 10624
Quote:
Originally Posted by BeeMan458 View Post

These are the subwoofer cables we're currently employing to carry our fragile subwoofer signal. tongue.gif

Well constructed, professionally terminated, gold plated RCA ends and if you have a Prime membership, two day shipping is included.

Just ordered with my prime membership. Thanks :-)
post #9907 of 10624
Quote:
Originally Posted by kerednai View Post

Just ordered with my prime membership. Thanks :-)

.....biggrin.gif
post #9908 of 10624
I really don't feel like I would notice an improvement over using some random RCA cables I had laying around.
post #9909 of 10624
I'm using a Monoprice sub cable and Y-adapter on my PC-12 NSD. Works like a charm, and the best part is that it's cheap too.
post #9910 of 10624
Quote:
Originally Posted by Ak Gara View Post

I really don't feel like I would notice an improvement over using some random RCA cables I had laying around.

And you probably wouldn't notice a difference either. If I don't have a 15' cable hanging around, how much will I have to pay for a 15' cable at Radio Shack or MonoPrice? I would consider myself lucky to find a 15' subwoofer cable at Radio Shack so I'll have to include the cost of gallon of gas on the final purchase price and currently, gas in our neighborhood is $3.81/gal. So going with Radio Shack, there's good reason to believe I'd be doing nothing but harming the environment by going there to see what the local store has on hand.

Just for giggles, I checked with Monoprice's online shopping and for what I perceive to be a similar delivered product, would cost me $10.35. If I went with two day shipping, like is offered by Amazon, Monoprice would charge me, $20.76. Just saying.
post #9911 of 10624
Quote:
Originally Posted by BeeMan458 View Post

And you probably wouldn't notice a difference either. If I don't have a 15' cable hanging around, how much will I pay for a 15' cable at Radio Shack or MonoPrice?

Just for giggles, I checked with Monoprice's online shopping and for what I perceive to be a similar delivered product, would cost me $10.35. Just saying.

Yes Monoprice delivery is relatively high if you are only ordering 1 or 2 items & why I swayed to Amazon.
post #9912 of 10624
Quote:
Originally Posted by Ace of Space View Post

I'm using a Monoprice sub cable and Y-adapter on my PC-12 NSD. Works like a charm, and the best part is that it's cheap too.
Why are you using a y-adapter. What does that buy you?
post #9913 of 10624
Quote:
Originally Posted by d_m1010 View Post

Hey thanks for the response! The Ultras are hard wired to the Rotel 1570 preamp and the 2 Pluses are plugged into the Benchmark HDR (along with the ASEQ1) . The mains for the 2 channel are Philharmonic 2s and the mains for HT are JM Lab Focal 920s

We're not in the same league at all biggrin.gif (then again, few people are in your league to begin with I think). Don't you think (part of) the slam / chest thump could come from your 920s? I recon those have 10" woofers?
Quote:
Originally Posted by bamaboom View Post

Well I finally did it. After a month or so of combing through posts and websites of various subs I pulled the trigger on the SVS SB 12 NSD.

Congrats! Depending on where you come from in terms of subwoofage, you may be very, very surprised at how much can come out of this small sub. My SB12 was an eye-opener, and I miss it sometimes biggrin.gif
post #9914 of 10624
Quote:
Originally Posted by kerednai View Post

Why are you using a y-adapter. What does that buy you?

When needed, a 3dB boost.

We currently have a "Y" splitter added to one of our subs to help balance out the measured output as even though the subs are the same, the output gain is not the same. With the addition of the "Y" splitter to the one sub, the difference in the output is minimized by 3dB and now the subs are calibrated within the +/-2dB limits of the sound meter.
post #9915 of 10624
Quote:
Originally Posted by BeeMan458 View Post

Quote:
Originally Posted by kerednai View Post

Why are you using a y-adapter. What does that buy you?

When needed, a 3dB boost.

We currently have a "Y" splitter added to one of our subs to help balance out the measured output as even though the subs are the same, the output gain is not the same. With the addition of the "Y" splitter to the one sub, the difference in the output is minimized by 3dB and now the subs are calibrated within the +/-2dB limits of the sound meter.

Turning up the gain by 3db has the same effect as a Y splitter and it's cheaper.
post #9916 of 10624
Yes, the Y in order to use the two inputs will give 3 dB *input* gain, but won't change the max output, of course.

One possible benefit of using the Y is lowering the threshold required for auto-turn-on.
post #9917 of 10624
I use monoprice cables for my plus! no issue
post #9918 of 10624
Quote:
Originally Posted by sputter1 View Post

Turning up the gain by 3db has the same effect as a Y splitter and it's cheaper.

Doing it the way you suggest doesn't work as I tried to point out. The first thing one needs to do is calibrate their subwoofer output and the gain control won't allow this to be done within the accuracy of the sound meter. In my case, turning the gain up an additional notch causes a 10dB increase which is more of a gain then Audyssey or the AVR internal gain is capable of dealing with. What I did could only be done with benefit of a "Y" splitter.

My comment was a response to the comment I responded to and yes, it's a valid reason to add a "Y" splitter.
post #9919 of 10624
^^^ Interesting Buzzy ! wink.gif

I'll have to try it once i begin to calibrate my PB1000's if I run into the same issue.

Nashou
post #9920 of 10624
I've never had any problems with the "Media Bridge" cables on Amazon. Work well, good quality and fast free delivery.....with prime. wink.gif
post #9921 of 10624
Quote:
Originally Posted by DanL View Post

I've never had any problems with the "Media Bridge" cables on Amazon. Work well, good quality and fast free delivery.....with prime. wink.gif

I'm using Media Bridge cables for my DefTech LFE channels. No issues with them what so ever. For my SVS I had to make a cable, couldn't find a 50' white cable anywhere. I used RG-6 coax with
these ends, I can't tell any difference in the cables...
post #9922 of 10624
Looks like the winter storm has stopped my PB12-Plus from being delivered today. It was in the "destination warehouse" at 2:00a.m. this morning
but it's going to stay there until Monday. At least it's in a safe location..... wink.gif
post #9923 of 10624
Quote:
Originally Posted by DanL View Post

Looks like the winter storm has stopped my PB12-Plus from being delivered today. It was in the "destination warehouse" at 2:00a.m. this morning
but it's going to stay there until Monday. At least it's in a safe location..... wink.gif

That sucks!
post #9924 of 10624
Indeed! Can you go to the warehouse in person and get it by yourself? (If you do so though, take care not to crash yourself in the first place).
post #9925 of 10624
Quote:
Originally Posted by Brian Fineberg View Post

That sucks!

Yes it does. I was really excited about having the Plus here for the weekend but I'm not blaming anyone... Just whining, ha-ha. On the bright side
I do have the PB12-NSD here so it won't be a "bassless" weekend.
post #9926 of 10624
Quote:
Originally Posted by neutro View Post

Indeed! Can you go to the warehouse in person and get it by yourself? (If you do so though, take care not to crash yourself in the first place).

I'm sure that would be possible, but it would involve a 60 mile 1-way drive to Detroit and the e-ways in the metro area probably look like a demo derby today. Even though
I have a new 4WD Silverado I'll take a pass on that action. eek.gif
post #9927 of 10624
Quote:
Originally Posted by ceh383 View Post

I'm using Media Bridge cables for my DefTech LFE channels. No issues with them what so ever. For my SVS I had to make a cable, couldn't find a 50' white cable anywhere. I used RG-6 coax with
these ends, I can't tell any difference in the cables...
My (black) Media Bridge cable came today. Looks like a good quality cable. Just an FYI - looks like you can now get a 50' Media Bridge cable in white here if anyone else is interested. I have a QED Performance Mini Subwoofer cable that I'm using somewhere else. Its nice if you want to run a cable along the floor as its slimline. They are pretty pricey in the US (I got mine thrown with a complete HT deal a few years back in the UK) but I did notice similar thin sub cables on Amazon when I was looking the other day. Hopefully this might just help someone out.
post #9928 of 10624
Quote:
Originally Posted by DanL View Post

I'm sure that would be possible, but it would involve a 60 mile 1-way drive to Detroit and the e-ways in the metro area probably look like a demo derby today. Even though
I have a new 4WD Silverado I'll take a pass on that action. eek.gif

Okay, it's not the local warehouse then smile.gif You're right, better safe than sorry. Although you're lucky to even have a vehicle capable of hosting the PB12-Plus. I don't think it would fit in my hatchback. Although I was *barely* able to fit two PC12-Plus in it.
post #9929 of 10624
Quote:
Jesus Christ we just watch The Cabin in the Woods and omg the low frequency on this movie is crazy , and this SVS goes boom boom, incredible subwoofer love it, my wife was like omg this is insane , now i can see the different between this sub and my old STF-3

Isn't it great to finally experience a great sub and movie ?? smile.gif
post #9930 of 10624
yes it is smile.gif , im still impress by this baby, today we gone watch live free or die hard thas gone be crazy when the plane try to stop Bruce Willis on the highway
New Posts  All Forums:Forum Nav:
  Return Home
AVS › AVS Forum › Audio › Subwoofers, Bass, and Transducers › Official SVS Owners/Support Thread.