AVS › AVS Forum › Blu-ray & HD DVD › Blu-ray Software › Blu-Ray Custom Cover Art (huge files)
New Posts  All Forums:Forum Nav:

Blu-Ray Custom Cover Art (huge files) - Page 103

post #3061 of 5690
8/29/09 at 10:14pm
Quote:
Originally Posted by BallsDeepX View Post

All of a sudden Infraview stopped printing my covers properly. Its cutting off the left side a little bit, a little more than 1/4 is being cut off. I did get a new printer but not sure why this would effect how Infraview. Any ideas?

In the preview section of Infraview its showing it properly but when I print its cutting the left side off a little bit.

This is for Blu-ray covers, correct? If it were DVD covers, I would say each printer can have a slightly larger or smaller printing area.

Are you using 8.5 x 11? Do you have larger paper, to see if it's the paper size with your new printer? Or, maybe your printing size could be adjusted. If it's "letter", change to "A4."

I just started printing covers, and my printer does the same as yours with DVD covers, a little less than 1/4 inch missing. It just barely fits a blu-ray with 8.5 x 11 paper. I'm glad because I bought my photo paper just for a few Blu-rays I wanted.

You could also try undercoverxp, and see if that helps. That's what I use.
Reply
Reply

AVS Top Picks

post #3062 of 5690
8/30/09 at 9:42am
Quote:
Originally Posted by sonydude1966 View Post

This is for Blu-ray covers, correct? If it were DVD covers, I would say each printer can have a slightly larger or smaller printing area.

Are you using 8.5 x 11? Do you have larger paper, to see if it's the paper size with your new printer? Or, maybe your printing size could be adjusted. If it's "letter", change to "A4."

I just started printing covers, and my printer does the same as yours with DVD covers, a little less than 1/4 inch missing. It just barely fits a blu-ray with 8.5 x 11 paper. I'm glad because I bought my photo paper just for a few Blu-rays I wanted.

You could also try undercoverxp, and see if that helps. That's what I use.

Yes Bluray covers. 8.5 x 11 and no I don't have any larger paper.

I'll have to keep banging away on this thing maybe remove and reinstall. Still haven't figured out whats wrong with it.
Reply
Reply
post #3063 of 5690
8/30/09 at 4:06pm
Well I got it working. I had to add a inch to the top margin which doesn't make any sense. Because it was the left margin that was being cut off. But oh well its printing my covers properly now. And beggars cant be choosers.

*I added a inch to the left margin in attempt to fix it and that should of fixed it. But what did it do it cut off even more of the cover on the left side. Doh weirdo stuff. Then added an inch to the top margin which shouldn't of done anything but move the cover down a bit and what happens, it works.
Reply
Reply
post #3064 of 5690
8/30/09 at 8:00pm
Some logos are still missing and a few things here and there, but I'm almost done... Here's a preview



...I'm doing this for the trilogy+salvation...
Reply
Reply
post #3065 of 5690
8/31/09 at 5:39am
Quote:
Originally Posted by Morpheo View Post

Some logos are still missing and a few things here and there, but I'm almost done... Here's a preview
... snip pic snip ...
...I'm doing this for the trilogy+salvation...

Very nice indeed, looking forward to this.
Reply
Reply
post #3066 of 5690
8/31/09 at 9:24pm
Quote:
Originally Posted by Morpheo View Post

Some logos are still missing and a few things here and there, but I'm almost done... Here's a preview



...I'm doing this for the trilogy+salvation...

Awesome! Finally I've waited years for someone to do a proper Terminator cover. Great job so far. Only thing is it's called The Terminator. Need to add "The" to the header and spine.
Reply
Reply
post #3067 of 5690
8/31/09 at 9:36pm
I have a request for Hannibal and The Damned United!

Thank you!
Reply
Reply
post #3068 of 5690
9/1/09 at 3:40am
Quote:
Originally Posted by Wesker View Post

Awesome! Finally I've waited years for someone to do a proper Terminator cover. Great job so far. Only thing is it's called The Terminator. Need to add "The" to the header and spine.

Yeah I know, that bothers me as well. But I got rid of "the" because of the other films... When I imagine all 3 (and 4) side by side, I think it's better if it reads "Terminator", then "Terminator 2", "Terminator 3", etc... "The" isn't used in the other films. Anyway, I'll add it and there will be 2 options.
Reply
Reply
post #3069 of 5690
9/1/09 at 4:23am
[edit]
Since the original title is "The Terminator", there's actually no room for debate, so here's the final-final version. Typos and missing "the" corrected on the back.



Gallery updated. High Res version below (sig).
Reply
Reply
post #3070 of 5690
9/1/09 at 7:21am
Very nice, I can't wait for the other 3, if they all match I might have to pick up the old 3 Terminators.
Reply
Reply
post #3071 of 5690
9/1/09 at 8:56am
Quote:
Originally Posted by boxterduke View Post

Very nice, I can't wait for the other 3, if they all match I might have to pick up the old 3 Terminators.

They will. ...I just noticed some "the" still missing on the "the" version (credits and synopsis) I will correct them as well, sorry!
Reply
Reply
post #3072 of 5690
9/1/09 at 10:23am
Would anyone be interested in producing a new Bourne artwork set?

Specifically The Bourne Identity, as I think that artwork is really quite bad.
Reply
Reply
post #3073 of 5690
9/1/09 at 7:36pm
And now for T2...

Reply
Reply
post #3074 of 5690
9/1/09 at 9:48pm
Quote:
Originally Posted by Morpheo View Post

[edit]
Since the original title is "The Terminator", there's actually no room for debate, so here's the final-final version. Typos and missing "the" corrected on the back.



Gallery updated. High Res version below (sig).

Fantastic. Your finished piece is perfect.
Reply
Reply
post #3075 of 5690
9/1/09 at 10:33pm
Quote:
Originally Posted by Morpheo View Post

[edit]
Since the original title is "The Terminator", there's actually no room for debate, so here's the final-final version. Typos and missing "the" corrected on the back.



Gallery updated. High Res version below (sig).

There's a typo on the back - "asrenal" should be "arsenal"
Reply
Reply
post #3076 of 5690
9/2/09 at 1:56am
When you guys quote someones post that has a case cover on it. Remove the image please. If its on a different page then I can understand it. But why do we need 3/4/5 posts all with the same exact picture on it? It just makes the thread crazy.
Reply
Reply
post #3077 of 5690
9/2/09 at 4:19am
okay... I've checked for typos and they both seem fine now, sorry guys. Cleaned up the previews on flickr as well...

Hi Res versions.





...T3 on its way
Reply
Reply
post #3078 of 5690
9/2/09 at 6:48am
Quote:
Originally Posted by Morpheo View Post

okay... I've checked for typos and they both seem fine now, sorry guys. Cleaned up the previews on flickr as well...

...T3 on its way

RE: Terminator 2

You need to replace the "DTS-HD High Resolution" with "DTS-HD Master Audio", as well as annotate the spec to "DTS-HD MA", since DTS-HD could mean either HR or MA.

DTS-HD HR is lossy audio, like Dolby Digital Plus. Some of Lionsgate's early releases used it, like Total Recall and the original version of "Stargate".
Reply
Reply
post #3079 of 5690
9/2/09 at 7:00am
Quote:
Originally Posted by PeterTHX View Post

RE: Terminator 2

You need to replace the "DTS-HD High Resolution" with "DTS-HD Master Audio", as well as annotate the spec to "DTS-HD MA", since DTS-HD could mean either HR or MA.

hm, sorry, I missed that one. Thanks! Will do the correction later today.
Reply
Reply
post #3080 of 5690
9/2/09 at 10:38am
Quote:
Originally Posted by Morpheo View Post

hm, sorry, I missed that one. Thanks! Will do the correction later today.

No problem, very nice covers BTW.

One small request if you could replace the old "Dolby Digital" logos with the spiffy new ones like this one:



And for Terminator 1 and 3:

Reply
Reply
post #3081 of 5690
9/2/09 at 10:52am
Quote:
Originally Posted by PeterTHX View Post

No problem, very nice covers BTW.

One small request if you could replace the old "Dolby Digital" logos with the spiffy new ones like this one:

No problem. Thanks.

[edit] previews above have been updated with proper logos... Hi res as well...
Reply
Reply
post #3082 of 5690
9/2/09 at 7:06pm
Awesome job Morpheo on the Terminator covers!!!!
Reply
Reply
post #3083 of 5690
9/2/09 at 10:09pm
Quote:
Originally Posted by HoNuts View Post

Awesome job Morpheo on the Terminator covers!!!!

Thank you

btw, here's where I am with T3, should be done by tomorrow. I'm still not sure if I put something behind Arnold's face or leave it black. And maybe "rise of the machines" on front is too big. Oh, well, time to go to sleep anyway




...oh and I've also started this; waiting for the final specs though. That's really a first draft, but that poster is too cool!...

Reply
Reply
post #3084 of 5690
9/2/09 at 11:07pm
Quote:
Originally Posted by Morpheo View Post

No problem. Thanks.

[edit] previews above have been updated with proper logos... Hi res as well...

Shhweeet! Kudos.
Reply
Reply
post #3085 of 5690
9/3/09 at 4:44am
Hello everybody!

I am looking for a good scan of the Sand Pebbles US blu-ray cover. So I can replace the ugly french one I have....
Thank you

Reply
Reply
post #3086 of 5690
9/3/09 at 6:00am
Dang Morpheo, these are wonderful, great work.
Reply
Reply
post #3087 of 5690
9/3/09 at 6:46am
Quote:
Originally Posted by ouatia View Post

Hello everybody!

I am looking for a good scan of the Sand Pebbles US blu-ray cover. So I can replace the ugly french one I have....
Thank you

Check your PMs...
Reply
Reply
post #3088 of 5690
9/3/09 at 6:51am
Quote:
Originally Posted by boxterduke View Post

Dang Morpheo, these are wonderful, great work.

Thank you. These are fun to do As I will put Salvation on hold until we know the official specs, I'm gonna give the Bourne trilogy a new spin once T3 is done!
Reply
Reply
post #3089 of 5690
9/3/09 at 6:54pm
Quote:
Originally Posted by Morpheo View Post

Thank you

btw, here's where I am with T3, should be done by tomorrow. I'm still not sure if I put something behind Arnold's face or leave it black. And maybe "rise of the machines" on front is too big. Oh, well, time to go to sleep anyway




...oh and I've also started this; waiting for the final specs though. That's really a first draft, but that poster is too cool!...


Please leave it black. Looks great. I'd love to see what other stuff you can come up with. You did a great job with the Underworld films and I like the fact that you use a lot of the original theatrical posters. If you need any high quality source material, Movie Poster Database is where I go.
Reply
Reply
post #3090 of 5690
9/3/09 at 7:02pm
Quote:
Originally Posted by Morpheo View Post

okay... I've checked for typos and they both seem fine now, sorry guys. Cleaned up the previews on flickr as well...

Hi Res versions.





...T3 on its way

Staying with your theme, I just noticed, have you thought about replacing the T-800 on the back of the Terminator 2 slip cover for one of the T-1000? You've got the T-X on Rise of the Machines. Just thought it would fit the theme of the covers.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Blu-ray Software

AVS Top Picks

AVS › AVS Forum › Blu-ray & HD DVD › Blu-ray Software › Blu-Ray Custom Cover Art (huge files)