1292 converged until source is on

The "no input convergence" is a base for all the memory blocks in the PJ(usually 34khz internal oscillation-memory block 4). Go to a no input condition and check a test pattern to make sure its on. Hold the memory key for 5-10 seconds until it asks if you want to save for all inputs. Push up for OK. Switch to your desired input, and the convergence should be better, but not on. Reconverge with the input connected and selected, source ON. Press memory quickly to save just that memory block. You will have to do this for most different resolutions(1080i,720p,1080p,etc.) as the PJ saves each different frequency(resolution) to its own memory block.