AVS › AVS Forum › Blu-ray & HD DVD › Blu-ray Players › Samsung BDP-1000 problem
New Posts  All Forums:Forum Nav:

Samsung BDP-1000 problem

post #1 of 26
Thread Starter 
I've had mine for a couple of months and have watched a few BR movies without any problems to speak of till this evening. I put in a brand new BR DVD and the player would not load the disc. There was a message on the screen saying the disc could not be played.

I tried a few more BR DVD's that we've watched with out any problems in the past...none of them will load!

Next step was to try a SD DVD...loaded without any problems at all.

Went back to another previously viewed BR DVD...same damn thing! Front panel display says NO DISC!

I even tried pulling the plug and letting the unit sit for a minute or two before plugging it back in. Same problem.

Before you ask, yes I installed the firmware update the same day I bought the player.

Anyone else experience this mess?
post #2 of 26
Thread Starter 
Just got off the phone with tech support.
Well I'm going to be sending the unit in to be repaired. Less than sixty days and only a few movies and it crapped out. I'm not impressed.
post #3 of 26
Quote:
Originally Posted by Frank Zimkas View Post

I've had mine for a couple of months and have watched a few BR movies without any problems to speak of till this evening. I put in a brand new BR DVD and the player would not load the disc. There was a message on the screen saying the disc could not be played.

I tried a few more BR DVD's that we've watched with out any problems in the past...none of them will load!

Next step was to try a SD DVD...loaded without any problems at all.

Went back to another previously viewed BR DVD...same damn thing! Front panel display says NO DISC!

I even tried pulling the plug and letting the unit sit for a minute or two before plugging it back in. Same problem.

Before you ask, yes I installed the firmware update the same day I bought the player.

Anyone else experience this mess?

You mentioned that you bought the player several months ago and installed the firmware update the same day that you bought it.

Did you know that there have been new (17 Dec 06 is the latest release) firmware updates since then? Have you tried those?
post #4 of 26
Quote:
Originally Posted by rdodolak View Post

You mentioned that you bought the player several months ago and installed the firmware update the same day that you bought it.

Did you know that there have been new (17 Dec 06 is the latest release) firmware updates since then? Have you tried those?

Yes, Frank it would appear you need the latest FW.

~Josh
post #5 of 26
So, what was the BR movie that triggered the problem?
post #6 of 26
Thread Starter 
When I talked to Samsung CS they said that there were no updates since I installed the version that was available on 11-11-06. I'll see what's on their site and give it a shot. What's the worst that could happen? No BR playback?

The movie that I was going to watch was Sky Capt.
post #7 of 26
Quote:
Originally Posted by Frank Zimkas View Post

When I talked to Samsung CS they said that there were no updates since I installed the version that was available on 11-11-06. I'll see what's on their site and give it a shot. What's the worst that could happen? No BR playback?

The movie that I was going to watch was Sky Capt.

I not surprised Samsung CS is confused since they have been labeling the firmware as v1.0 all along even though it's been updated a number of times.
post #8 of 26
Could be the blue led and /or optic went bad. The SD disc is still being read with the the good, still working red led which has not failed. Time to send the unit in for repair.

BTW: If you still watch SD DVDs and want the upscaling, perhaps wou could arrange for a "hot swap". Basically you hang onto to your current player and send it back once you receive the new unit. You'll have to put down the cost of the another unit via credit card, but they don't run it through unless you are really late in shipping the broken unit back.

I've done this with succes with many other device (computer stull mostly) and it's worked very nicely for me. May not work here but it can't hurt to ask.

BOL.

Jim
post #9 of 26
Thread Starter 
The player won't even do a firmware update now.

I think I'll ebay it after it comes back from the shop and stick with a name I've had better luck with in the past.
post #10 of 26
This has just happened to me this weekend as well. It's the exact same problem except that mine is a refurb I have had since August and it's out of warranty. I am going to call Samsung tomorrow and see what they say. Mine would give me the "this disc can not be played" message every once in a while but it would play the disk if I just closed the tray and tried again. Now it won't load most of the time giving me a "no disc" message on the front panel or the above mentioned message on screen. Standard DVD's play fine. Not even six months old pretty crappy for the $600 I paid for it. I also flashed the firmware again today just to make sure that was not the problem but to no avail.
post #11 of 26
Good thing I bought that PS3!
post #12 of 26
Having the same intermittent problems where a disc will play one day then become unreadable the next. Have tried both firmware updates. What's crazy is that the player seems to function ok right after the update, then go awol the next day. Does anyone know how Circuit City deals with service calls on equipment 6 months old?
post #13 of 26
Just reloaded the firmware from November and all of my trouble BDs are now playing. Its like the box loses the firmware after being powered off for 24hrs. Has anyone else seen this happen????
post #14 of 26
Now that I think about it this was a non issue with titles pre Rocky and Pearl Harbor. Hate to send my box off for maintenance for 8 weeks when it seems to be a compatibility issue with new titles. Have already tried the Dec update. Venting at this point trying to figure it out.
post #15 of 26
I get this problem too, every so often. More so with Paramount titles. MI3 is the worst offender. It will play maybe 1 out of 4 or 5 attempts... On the other hand all Sony titles work a treat! This player is weird...
post #16 of 26
Quote:
Originally Posted by rdodolak View Post

You mentioned that you bought the player several months ago and installed the firmware update the same day that you bought it.

Did you know that there have been new (17 Dec 06 is the latest release) firmware updates since then? Have you tried those?

I think your player has a hardware glitch, a drive problem i guess. please contact Samsung CS.
post #17 of 26
Thread Starter 
See post #6
post #18 of 26
Update: since my unit was a refurb when I gave the Samsung CS my serial number they told me there was a $30 labor fee and I would have to pay for shipping to this place called CVE in NJ to have it repaired. Sounded fair to me. After speaking with the CVE CS I was told that Samsung would send me a UPS E-label to have it shipped to them. After speaking with the second Samsung CS to get the E-label I think they may be taking care of the shipping as well. Fingers crossed.
post #19 of 26
Nice... If it comes back and works well, seems a bargain.

I genuinely like the player, if mine developes issues, I think I will also have mine repaired.
post #20 of 26
Thread Starter 
Well this just keeps getting better and better. I dropped off the player at a UPS store on 1-9-07. I made it's way to Denver on the same day (Arrival Scan) and no further moveemnt.

I called UPs and they told me a trace has to be requested but I'm not allowed to request it because I didn't pay for shipping. WTF!?!?

I called Samsung and and made it through 3 different levels of Customer Service before getting a trace started. I was told that if UPS has lost the player that Samsung will file a claim and I'll get a replacement. If a claim is filed it will take 1-8 days for UPS to process it.

Great way to start the week.
post #21 of 26
Hang in there Frank, atleast you might get a new player out of it maybe even a gen. 2.
post #22 of 26
Quote:
Originally Posted by rfisher View Post

This has just happened to me this weekend as well. It's the exact same problem except that mine is a refurb I have had since August and it's out of warranty. I am going to call Samsung tomorrow and see what they say. Mine would give me the "this disc can not be played" message every once in a while but it would play the disk if I just closed the tray and tried again. Now it won't load most of the time giving me a "no disc" message on the front panel or the above mentioned message on screen. Standard DVD's play fine. Not even six months old pretty crappy for the $600 I paid for it. I also flashed the firmware again today just to make sure that was not the problem but to no avail.

I had the same problem with a refurb that I bought off of ebay. Luckily Sam's Club has a no questions asked return policy...
post #23 of 26
I got my Samsung back today. I sent it out last Wednesday to a repair site in NJ so it was exactly one week to turn it around. Not bad. It was sitting on my porch for hours so it's real cold and I don't want to test it until it's warm. It looks like the BD drive and the whole front panel was replaced. There was plastic over the entire front and the BD drive door. I'll check back. The heck of it is I am tempted to sell it because I have been using my PS3 as a BD player and I love it.
post #24 of 26
Thread Starter 
Well mine FINALLY made it to CEV in New Jersey. No activity on the UPS site for 7 days and after I called Samsung the Package Trace verified the box was actually in NJ.


rfisher,
Were you notified by anyone that the repairs were complete and the player was being shipped back to you?
post #25 of 26
Thread Starter 
Just got it back this afternoon from CVE.

The unit sure as **** didn't come back the same way it left my house. It WAS flawless. Not a speck of dust on it, and no scratches. Now the top is scratched and dinged up.

Think that's bad...IT STILL DOESN'T WORK!!!!

Un-Freakin'-Believable! I talked to the Level One tech support person at Samsung before plugging the unit in and trying it out. I didn't want to do anything until I talked to them about the cosmetic condition. She agreed that the unit should have been returned in the same condition I sent it in. She told me to try the unit to see if it now worked. I tried calling back but they had already closed. You can bet your arse that I'll be on the phone at Zero Dark Thirty in the morning!

Gawd I'm pissed!
post #26 of 26
Thread Starter 
I think I've been a good little customer, but as of today I'm beginning to get the urge to choke the snot outta somebody.

As instructed yesterday by Samsung Tech Support, I called back this morning to talk to someone in the "Extended Customer Care" department. After trying for 2 HOURS to get through on their 800 number I finally get to the point where I'm on hold for the next available operator. I'm not makin' this up...I sat on hold for 30 minutes! The guy answers the phone and I go through 5 minutes of who I am, where I live, what my phone numbers are, etc, etc, etc..."Have you ever called Samsung Tech Support before?" They've got a record of all of calls every customer makes to them!!!

So I tell the tech-guy about the direction I received to call back today and ask for the other department so that I can get some resolution.

I get "Sorry Sir, That department is closed on the weekends. Are you sure you were told to call back today?" Heavy sigh from me and I ask to talk to his supervisor. The supervisor won't get on the phone to talk to me so the guy I'm talking to tries to put me through to the next department's voice mail, problem is that there is no voice mail system. All I got was a message saying that they are closed for the weekend (probably at home watching a good BR Player) and to call back when they're open.

Mr. Tech Support gives me some lame B.S. about how he's gonna send the other person that told me to call today a "Nasty Email" about all of this. Well La-tee-Freakin' da! What the heck is a "Nasty Email" gonna do for me and my BR Player that doesn't work....STILL!


I'll say it again, I'm not doin' this for a "Freebie" or anything like that. I just want my damn player to work and I want in the same condition that it was in when I sent it out.

Is that asking too much
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Blu-ray Players
AVS › AVS Forum › Blu-ray & HD DVD › Blu-ray Players › Samsung BDP-1000 problem