So I'm getting to the point of planning for my Dbox platform and setting everything up for the first time after it's been in storage for about six or seven years since I bought it. So I thought I'd test the D-box platform and actuators to take some height measurements so the platform meets the carpeting at the right height.
I connect everything and am getting an error on the front right actuator. I'm using the Odyssey XL's. The motion controller software reads:
A: FR Actuator Obstruction
Initially I just set the T-Slot frame on top of the actuators and there was no obstructions or weight on top of it aside from the aluminum platform itself.
I thought I would just remove it from having any weight on it and noticed some oil around the ring were the ball sits in.
Something tells me this isn't normal. I hope it's an easy fix after waiting this long for the first time to actually put the D-box in use.
Any advice would be appreciated.