Quick Q. I've read through the FAQ and this forum, but can't pin something down. It might not really matter idk.
Using a Denon AVR-1713 and take classic 5.1 (i know...). Followed guidelines on setting up, good there. Audyssey has settled on setting crossover individually to 80Front/90Center/80Surround. Room acoustics/speaker placement obviously come into play. I can raise that value to ~120 per speaker and I have as the Take bass is weak for obvious reasons. The LPF Hz knob on the sub is still @ 150 per Audyssey set-up guidelines. My question...do I turn that dial back to 120Hz post-audyssey calibration or does it not matter since the AVR has taken over the bass management? I guess worded another way, with the crossover set to 120Hz in the AVR will everything 120Hz and < get sent to the sub? Do I make sense. pre-Apologies for my "layman-istic" inquiry.
From the FAQ: