My Blu-Ray Movie Burning Experiences... - Page 70

Originally Posted by rocketknight73

I apologize..Any DVD HD.

Originally Posted by Wryker

Any reason you're not using ToNMT for your rips? Is 'size' an issue (meaning fitting the entire movie on a 25GB BD)? I rip all my BD's & HDDVD's using ToNMT and it automatically finds the streams and creates them as one file (.ts or .m2ts). If need be, I could use ClownBD to get them to fit on smaller disc. If you're not familiar with ToNMT http://www.networkedmediatank.com/sh...d.php?tid=1786

Originally Posted by rocketknight73

Now I have a MPEG TS(20GB) file. How do I burn that back to a BD-R so i plays and is recognized in a stand alone Blu Ray player?

Originally Posted by lchiu7

The PS3 won't play m2ts files with DTS audio unless they are in the AVCHD format. That means the source folder name has to be AVCHD and the disk has to be in UDF 2.5 format. I have found the best tool to do that is multiavchd

http://multiavchd.deanbg.com/

If you can browse through the folder on the disk, it's in the wrong format. If it's formatted correctly once you insert the disc it comes up as AVCHD and starts to play the title in the STREAM folder or brings up a menu if authored with the tool above.

Originally Posted by latreche34

Can you tel me how the setting suppose to be on tsMuxerGUI, because I've done so many discs with it and never got a problem, I may have changed something lately on the program?

Originally Posted by rocketknight73

Thanks. I'll give it a try. Like I mentioned the process I'm using is working fine until Terminator Salvation. It's not even that it's a must have movie. Now it's a war of attrition . Just wanted to be able to figure out how work with such BD's if I come across them. Thanks again. Will post again if it's successful or not.

Originally Posted by latreche34

I created a blu-ray disc from an MKV file using TsMuxer and output as blu-ray disc and burned as data using roxio on DVD9 disc, when played on my laptop blu-ray player it was detected as BDMV but my PS3 detected it as data disc, when browsing to the stream folder it plays the video but no sound at all, here is the details:
General
ID : 1
Complete name : F:\\BDMV\\STREAM\\00000.m2ts
Format : BDAV
Format/Info : BluRay Video
File size : 7.00 GiB
Duration : 1h 28mn
Overall bit rate : 11.3 Mbps
Maximum Overall bit rate : 35.5 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Duration : 1h 28mn
Bit rate : 9 315 Kbps
Nominal bit rate : 9 092 Kbps
Width : 1 920 pixels
Height : 1 040 pixels
Display aspect ratio : 16/9
Frame rate : 23.976 fps
Resolution : 24 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.190
Writing library : x264 core 88 r1471 1144615
Encoding settings : cabac=1 / ref=4 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / mbaff=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / wpredb=1 / wpredp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc=2pass / mbtree=0 / bitrate=9092 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.0
Language : English

Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Duration : 1h 28mn
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Surround: L R, LFE
Sampling rate : 48.0 KHz
Resolution : 24 bits
Language : English

Text
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Video delay : 1h 28mn
Language : English

Originally Posted by pixiesoft

Ok I have the video sorted but I know have a sound issue.

I have 2 .mp4 files with AAC 6ch audio and 1 .mkv file with the same AAC 6ch audio. Once compiled and played back I can have sound on the first movie but on the 2nd and 3rd movies there is no sound. This was all played back through CyberLink PowerDVD 10.

In the Sub/Audio Tab and under the Audio Conversion Settings section I have the following:

Use eac3to (Ticked)
TrueHD/DTS-MA/HR 640kbps AC3 (Ticked)
Non-HD Audio to AC3 bitrate 384
AAC channel remapping 1,2,3,4,5
I would recommend use multiavchd to create a bd-r disc inorder to play it
Everything else (Unticked)

Why will it play one movie's audio but not the other two?

Also I am getting this error from TSMuxeR that only happens with 1 .mkv file "Unsupported media type 15 for AVCHD/Blu-ray muxing"

SmartLabs tsMuxeR. Version 1.10.6 http://www.smlabs.net
Decoding H264 stream (track 1): Profile: High@4.1 Resolution: 1920:1080p Frame rate: 29.9701
H.264 manual setted fps not equal stream fps. Change H.264 fps from 29.9701 to 30
H264 bitstream changed: insert nal unit delimiters
H264 bitstream changed: insert pict timing and buffering period SEI units
Decoding AAC stream (track 2): Sample Rate: 48KHz Channels: 2
B-pyramid level 1 detected. Shift DTS to 2 frames
H264 bitstream changed: insert SPS/PPS units
Processed 162828 video frames
Creation of Blu-ray playlist

Originally Posted by vamovie

any standalone and ps3
the reason: when using tsmuxer with mutli m2ts files its known peoblem to audio synch problems and able to not playable

if u use multiavchd its creates seemless branches and its very lkely comptable on its ps3 too.

Originally Posted by latreche34

multiavchd is not a user friendly, too slow and it doesn't show the progress bar too complicated for me just my opinion, anyways I found out that it is not tsmuxer fault, it's the PS3 latest firmware, any BD structure not burned to BD-R media is going to be detected as DATA disc, I burned the same folders to BD-RW disc and PS3 played it as blu-ray fine, I will be passing the DVD9 to a friend to see if it plays on his blu-ray player.

Originally Posted by zoro

I tried multi avchd but could not make it work. Any simpler tutorial there?

Originally Posted by latreche34

Can you tel me how the setting suppose to be on tsMuxerGUI, because I've done so many discs with it and never got a problem, I may have changed something lately on the program?

Originally Posted by zoro

I tried multi avchd but could not make it work. Any simpler tutorial there?

Originally Posted by mtallent

If you are going to use a DVD disk then you need to select "AVCHD" as the output in tsMuxeR not Blu-Ray. Then burn using UDF 2.5 settings. This has worked fine on my PS3.

Mike T

Originally Posted by latreche34

I found out that it is not tsmuxer fault, it's the PS3 latest firmware, any BD structure not burned to BD-R media is going to be detected as DATA disc, I burned the same folders to BD-RW disc and PS3 played it as blu-ray fine, I will be passing the DVD9 to a friend to see if it plays on his blu-ray player.

Originally Posted by Mark A Gonzalez

Is there a best software to use for cloning blu-ray or do they all have thier flaws? I want to back up some of my blu-rays without any loss of quality.

Originally Posted by pixiesoft

I have a MKV file that I want to make into a Blu Ray movie and everything seems to go ok but when I burn it using IMG Burn and play it on my Blu Ray player I get sound but a blank screen. I thought that maybe it was NTSC as I am UK so I changed setting on player to NTSC but still blank picture.

What am I doing wrong?

My player is a BMP-DB35

Originally Posted by Pepster returns


(for @#%^&#$% sake, why do people bother creating %&^*@!#$% MKV files anyway ??)

.

Originally Posted by lchiu7

Maybe because it's the "best" format for uploading content of questionable legality and quite flexible in terms of codec support

Originally Posted by lchiu7

I myself backup my BluRay's as .ts or .m2ts format so that it's easily played by my Popcorn Hour or PS3. I don't care about the slight increase in space over MKV.

Originally Posted by MozartMan

MKV is not format, it is container, to be correct. Like .TS or .M2TS.


..PS3.

Originally Posted by jcsmith22

Ok, so I have a weird problem. I have burned about 15 blu rays, exact 1-on-1 copies onto bd-r 50gb Mitsubishi discs, I also am using the Pioneer BD 205 btw. I use AnyDvd HD for decoding and Blu Cloner 2 for burning. I have not had any issues until I recently tried to burn the movies "The Fourth Kind" and "Up". When I put the movie 4th kind in is brings up a load bar screen, I think this has to do with blu ray live maybe? Then after a while nothing....it will just sit there blank and you have to go to main screen, on ps3, to get out of the blank screen. The same thing happened with the movie Up. I have put the orginal movie in and after the loading screen it does start the movie so I am at a loss for what the problem might be and why my copied version isnt playing.....any suggestions or help before I make another very expensive coaster???