Originally Posted by mairj
Thanks, but my main 12" sub only has one line input, just like on the back of the 805, so I'm just using a monster sub cable for that hook-up. Now the new 8" sub has the analog RCA (red and white) inputs on the back of it. So how do I split the one input on the back of the 805 with a splitter cable if the two subs use different cables?
1>y-splitter out from the 805. run one line to the 12" sub
2>run the other single wire to the 8" sub
3>add another y-splitter at the end of the line for the 8" sub then plug that into R/L inputs.
if you like monster they sell a splitter for the 8" end otherwise monoprice but since it is an analog signal get good insulated cables like monoprice premium or monster if you really want to spend the money.
i had a huge noise problem in my car generated by the power feeds to the amps i replaced my analog 6' rca feeds with monoprice premiums and it is quiet as a vaccuum they actualy cost less than the ones that were on the system generating noise at least 60-75% less. never again will i waiste money on store premium cables. as an example i bought a 10' premium HDMI cable from monoprice it is the same construction as the monster HDMI selling at 160.00 mine was 21.00 and works perfect.