or Connect
AVS › AVS Forum › Audio › Speakers › SVS MTS Family
New Posts  All Forums:Forum Nav:

SVS MTS Family - Page 17

post #481 of 635
So, nobody has ordered the rear wall mounts from SVS??
post #482 of 635
I ordered the stands. I'm glad I didn't order the rear mounts(I considered it) The speakers are much larger than I thought they were and wouldn't have worked well on my wall since they are too big for the wall in my setup. But they do sound excellent.
post #483 of 635
Quote:
Originally Posted by aaronwt View Post

I ordered the stands. I'm glad I didn't order the rear mounts(I considered it) The speakers are much larger than I thought they were and wouldn't have worked well on my wall since they are too big for the wall in my setup. But they do sound excellent.

+1 on both points--the MBS are healthy-sized for sure and take a special room/situation to use them on the wall, and they do sound fantastic!
post #484 of 635
Unfortunately, I dont think I could use the stands, I would have to put one right next to me head & the other about 6ft away.

I know the rears are large but mounting them on the walls gives me more (& equal) distance from the seating area.
post #485 of 635
Quote:
Originally Posted by Cam McFarland View Post

Unfortunately, I dont think I could use the stands, I would have to put one right next to me head & the other about 6ft away.

I know the rears are large but mounting them on the walls gives me more (& equal) distance from the seating area.

No worries, that's how Ron (of SVS) has his! Just know that those MBS will handle anything the surround channels can throw at them--they are exceptional at getting loud!
post #486 of 635
When you got yours, did the speakers & sub come via 2 different shipping companies, if so, did they arrive the same day???
post #487 of 635
Quote:
Originally Posted by Cam McFarland View Post

So, nobody has ordered the rear wall mounts from SVS??

There is not enough room in the box for the rear mounts. Those are probably in the same shipment as box 2 of X.

Fair warning: you will need help from a friend to hang these. And when you think you have the teeth tight enough around the rubber ball on the mount, keep tightening. I woke up the next morning with the speakers sagging against the wall and had to start over.

-Robb
post #488 of 635
Quote:
Originally Posted by aaronwt View Post

I have a question about the speaker stands that SVS has for the surround speakers. I bought two pairs for my four surround channels and they look fine.
I'm just a little concerned that the speaker stands say the max speaker weight for the stands is 25lbs. But the bookshelf speakers are 27lbs.
Has anyone had any problems with these stands since they are supporting more weight than the specs say they are designed for?

I ordered those stands as well, haven't had a problem since the end of Sept. It's only 2lbs, they'll be fine.
post #489 of 635
Quote:
Originally Posted by robbroy View Post

There is not enough room in the box for the rear mounts. Those are probably in the same shipment as box 2 of X.

Fair warning: you will need help from a friend to hang these. And when you think you have the teeth tight enough around the rubber ball on the mount, keep tightening. I woke up the next morning with the speakers sagging against the wall and had to start over.

-Robb

Thanks for the info I will not be doing it by myself...


That's just it (see bold) the speakers are coming in 2 shipments from 2
different shipping companies...UPS & BaxGlobal.....the UPS shipment contains 5 boxes (5 speakers, correct?) & the BaxGlobal contains 1 box which has to be the sub due to the weight of the box.

Unless they packed the mounts in one of the speaker boxes I am 1 box short...unless two of the speakers come in one box.

I hope this made sense...

- Cam
post #490 of 635
It iturns out the two rear speakers comer in 1 box, so my mounts are coming via UPS with the speakers.

Now, how does one go about removing the pb13 ultra from it's box without destroying it (the box) in the event I need to send the sub back???
post #491 of 635
Hi Cam,

Open the bottom, pull box up and over the pb13.

or

Open top and bottom, slide/push pb13 on it's side.

Fold boxes and store.
post #492 of 635
Quote:
Originally Posted by bearchan View Post

Hi Cam,

Open the bottom, pull box up and over the pb13.

or

Open top and bottom, slide/push pb13 on it's side.

Fold boxes and store.

This is what I was thinking, but I was worried about rolling it over on it's side.....and I hadn't thought about opening both top & bottom to fold for storage...
post #493 of 635
You all probably already saw that the SV Sound MTS package received "Certified and Recommended" by Sound & Vision, but they also received one of the 20 "2008 Editor's Choice Awards" from them as well:

http://www.soundandvisionmag.com/fea...t-1-page4.html

-Robb
post #494 of 635
Can anyone tell me how the MTS-01 compare to a Rocket 850, 450 and SC200 (Big Foot) HT system? I already own the PB-13 which will be integrated to either system.

Thanks
post #495 of 635
Quote:
Originally Posted by 380hpSC@12 View Post

Can anyone tell me how the MTS-01 compare to a Rocket 850, 450 and SC200 (Big Foot) HT system? I already own the PB-13 which will be integrated to either system.

Thanks

I'm openly biased, but a guy near me has the Rocket set, and I thought they looked a lot better than they sounded. I think the SVS look good, and sound better.

-Robb
post #496 of 635
Quote:
Originally Posted by robbroy View Post

I'm openly biased, but a guy near me has the Rocket set, and I thought they looked a lot better than they sounded. I think the SVS look good, and sound better.

-Robb

I agree with Rob as well. I have a friend who has Rocket 1000 and I thought the MTS Towers had more detail than the Rockets did for both 2 channel and HT audio.
For the longest time I was auditioning for tower speakers from Axiom M80's, Polk Audio LSi 15's and the SVS MTS line.
In my opinion I thought Axioms M80's were good but not as detailed as the LSi15's. The SVS towers I thought had the best detailed sound out of the three speakers and for the price of the SVS towers it was a no brainer for me to pick the MTS line.
These are just my thoughts and my thoughts only.

Dixlon
post #497 of 635
Can someone give me a real life measurement of the height of the MCS-01 center speaker. The web specs say 10". I just checked my Entertainment center and I literally have 10 1/8" so it is going to be tight. Should I be worried about the speaker being so tight in there? Considering pulling the trigger on the full MTS-01 family.
post #498 of 635
it is 10 inches if i remember correctly. Possibly 9 and 7/8 ths.

I wish I had 10 1/8" of space.
post #499 of 635
Any concern with it being so tight for me?
post #500 of 635
Quote:
Originally Posted by aaronwt View Post

I wish I had 10 1/8" of space.

+1

I ended up wall mounting the center above my screen, just resting the leading edge of the mount on top of the set.....if I was at home I could give you the true dimension.
post #501 of 635
Quote:
Originally Posted by lakebum431 View Post

Any concern with it being so tight for me?

I dont see why there would be any concern as long as it fits.....

my .02
post #502 of 635
Cam if you remember and don't mind measuring I would really appreciate it.
post #503 of 635
Quote:
Originally Posted by lakebum431 View Post

Cam if you remember and don't mind measuring I would really appreciate it.

check back in about 1 1/2 hours....gives me enough time to get home, measure & get back online....
post #504 of 635
I just measured mine. 9-7/8" flush with the top.
post #505 of 635
Perfect! Thanks Ed!
post #506 of 635
Quote:
Originally Posted by Ed Mullen View Post

I just measured mine. 9-7/8" flush with the top.

Well, one of us does not know how to measure...mine is 10.25".

I hope somebody else can chime in.....
post #507 of 635


I think mine is between 10.125 and 10.25

I thought it was right at 10 inches or slightly below.(it doesn't matter for me either way since my stand only has around 9.5 inches)

It's kind of difficult for me to measure exactly since it's curved on the sides.
post #508 of 635
Quote:
Originally Posted by aaronwt View Post



I think mine is between 10.125 and 10.25

I thought it was right at 10 inches or slightly below.(it doesn't matter for me either way since my stand only has around 9.5 inches)

It's kind of difficult for me to measure exactly since it's curved on the sides.

Take the front grill off & measure the flat surface for a true height...
post #509 of 635
Hmm, quite the range. Now I'm worried. If it won't fit in the stand I'm not sure it will pass the WAF. The difference between what Ed measured and what Cam measured is only .375" but if on the top end of that then it won't fit
post #510 of 635
Quote:
Originally Posted by lakebum431 View Post

Hmm, quite the range. Now I'm worried. If it won't fit in the stand I'm not sure it will pass the WAF. The difference between what Ed measured and what Cam measured is only .375" but if on the top end of that then it won't fit


Maybe Aaron will take the grill off his & measure it as I suggested to get a more accurate dimension......
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Speakers
AVS › AVS Forum › Audio › Speakers › SVS MTS Family