Mitsubishi WS-55813 green blinking light? - Page 3

i have a ws-65513 that also has the continues flashing green light, i replaced the 4 caps on the DM board but no help, took the board out, reseated and still nothing but flashing green light. Could anyone help please

Got the blinking light on my Mit. WS55613 Tuesday am.
Wow was I depressed. Searched for an answer and found it here. The fix was pretty easy. Replaced the capacitors in my DM module. Had the TV working again by Tuesday evening.
Thanks to all.

There are small ceramic fuses on the DM that might need checking. Especially the one that supplies power to the capacitors. I found that my board needed that fuse replaced. It is a surface mounted fuse and could have the new one soldered directly on the older one, might be preferred to trying to de-solder the old one. A multimeter should do the trick in diagnosing the fuses. Good luck.

Thanks Tony V. I have checked the three fuses on the back of the board and none of the three show open, Im not sure what else to do. I was excited to see this was a common problem and there was a fix but very disappointed when it didnt fix mine. Any other help? Thanks

J-Whit, i have the service manual in pdf format... if you want, i can e-mail it to you.

just need your e-mail address.

peace.

just PM it to me...

Have you made sure that the capacitors were placed correctly according to polarity? There is a negative and positive leg. I made that mistake and had to remove and resolder the cap. It was found before I reinstalled the board.
There is a error code retrieval procedure, however, DM problems don't seem to trip error codes. Does the TV try and turn on or does it just blink?

Yea the polarity is correct, the tv doesnt do anything but have the blinking green light, i have left it unplugged, pushed the reset, just the dang blinking green light! and it makes a clicking noise, sounds like its from the power supply board but im not positive.

Well i got it fixed!!!!!!! I replaced the 3 fuses on the back of the DM board, and went ahead and resoldered the caps and it WORKS!!!! Im sure it was one of the 3 fuses. Thanks to everyone that helped. Great place!!

Can u please email me with the instructions please??? Hertzjustin@aol.com

thanks!

WS 65711 here that's winking green at me.

wick246@netzero.net

Thanks PackRat!

ok Justinman and wick246, it should be there.

good luck!

glad you got it going.

Hi. I've been reading this forum and I too have the same problem. The dreaded blinking green light.
Is the file with instructions to fix it still around? If anyone has it please can you forwarded to me at gguardado@comcast.net

Thanx.

please send me the schematics as well!!

JJalowiec@whm-info.com

Thanks

o.k., TELABEACH and computerguy123,

should be there, and good luck!!!

All,

I'm comforted to know that others also have the same problem as me. Specifically, I have a Mitsubishi WS65711 and the front light has been blinking green non-stop ever since we had a power outage.

Could someone please e-mail me the needed schematics to replace the caps on the DM board? Thanks VERY MUCH in advance for your help!

Please e-mail to: sadguy.tv@gmail.com

Thanks again for your help.

I have the same issue with my WS-65711 that happened after a power outage here in San Diego yesterday. If you could send me the file, I'll pick up the parts and get 'er fixed. Thanks!

savecassive@gmail.com

-Evan

I am also having the same problem with the blinking green light. Can someone please email the instructions for repair. [email="al.bianco@ieee.org"]

Hi PackRat2112,

Thanks for doing all you have on this issue. Hopefully you can help me out also. I have the WS 55511 model and I didn't see a guide for it. If you have one for the cap replacement can you send me a copy? Or if you do not have one if another model will do the trick please send it. Thanks jamesbutchko@me.com

I am also having the flashing green light. Would you please send me the repair info? Thank you.

mplooper@gmail.com

My set had been dead for over a year but it is too big to move out of my bedroom. When I first bought it took 2 technicians to bring it inside my house and they took it apart. Otherwise I'd have thrown it out a long time ago.
As of 2 days ago feb 14th, I got my set fixed following your instructions. I spent $2 dollars and change in parts to fix it. My set is working great. All I can say is thanx PackRat2112 for forwarding the file with the instructions. Thank you so much

Telabeach

ps
for anyone who might need the file, please email me at gguardado@comcast(dot)net I'll be more than happy to forward the instructions along with the tv schematics.

I have similar issues with WS-65611 model. Can someone please forward the file to troutline99@hotmail.com

Thanks

hi im having the same issue packrat plz assist i have a wd 73835 this is not good thx in advance !!
email is habb79@yahoo.com

Hi, I have the same problem on a Mits 52525. Could you send me the packet please to microsyskl@yahoo.com please

Just had a bad storm roll through and lost power, when it came back on my tv had that dreaded green blinking light. can you please send me the info I will need to get my tv working again? thank you!
please send to pc_nissan@yahoo.com Thanks again!

Just wanted to say thanks to everyone who posted on this site for there knowledge and kindness that helped me diagnose my issue. I removed my dm board and took it to one of the last remaining " mom n pop" shops around and asked if that would swap out my capacitors for me...they did and it fixed my blinking light problem so cheers to all!

where can I find the SERVICE manual for Model WD-57734
I have the blinking greeen light problem..
thanks

is there a site where they show how to replace the 4 caps on this model?

I could not turn off my WS65711 with remote or front button. Unplugged it, let it sit overnight - plugged it back in. Light flashes for about 30 seconds then stops. Still will not power up. Is that the same symptom or does the light blink continously? Will the cap replacement fix this problem?

Please send the procedure steve.zajkowski@comcast.net

Thanks,

My 52525 came up with the BGLOD after being unplugged and moved today...can someone DM me the repair instructions? I'm at mlscholz@yahoo.com

Thanks,
Marcus