or Connect
AVS › AVS Forum › Display Devices › Rear Projection Units › Official Sony KDS-XXA3000 OWNERS THREAD!
New Posts  All Forums:Forum Nav:

Official Sony KDS-XXA3000 OWNERS THREAD! - Page 3

post #61 of 15255
It's hard to tell on that picture, but does the right side seem to barrel. There isn't enough background light for me to tell.
post #62 of 15255
Thread Starter 
Quote:
Originally Posted by brophog View Post

It's hard to tell on that picture, but does the right side seem to barrel. There isn't enough background light for me to tell.

I didn't notice anything. I've got great vision though (20/15) and I was holding a straight edge, doing the best I could to see if there were any noticeable bends and I didn't see any. I was holding the camera a little to the left, shooting the pic's though, I didn't want to move the big foot-rest I have with our couch. I was holding the straight edge to the right of the screen, too.
post #63 of 15255
I'll take your word for it over a picture, just thought I'd bring it up.
post #64 of 15255
Quote:
Originally Posted by insly View Post

I didn't notice anything. I've got great vision though (20/15) and I was holding a straight edge, doing the best I could to see if there were any noticeable bends and I didn't see any. I was holding the camera a little to the left, shooting the pic's though, I didn't want to move the big foot-rest I have with our couch. I was holding the straight edge to the right of the screen, too.

It may be the camera then, but it looked pretty good. If you can pull up a 4:3 DVD with a bright scene, that would show the border better. Of if you have the Avia DVD, that would show geometry patterns. I'm pretty sure there are some home brew DVD's that people posted on this forum which does the same thing.

Robert
post #65 of 15255
Thread Starter 
Results may vary, I'm normally pretty anal about stuff like that - however I've been so impressed with the PQ and everything about it so far, that I'm really kinda satisfied that I haven't found the usual problems that I see with other previous TV's I have, such as the screen door, sse and other little stuff.

I think it would be hard to tell period, unless it was pretty obvious about the geometry of a TV from a pic.
post #66 of 15255
Thread Starter 
I'm going to go and buy one of the DVE/avia discs today, since I can't find mine. I'll probably get it for hd-dvd. I'll post up then.
post #67 of 15255
I forgot to ask... Can you take some pics of it's profile? We want to see how thin they made this puppy.

Robert
post #68 of 15255
Thread Starter 
Quote:
Originally Posted by Valnar View Post

I forgot to ask... Can you take some pics of it's profile? We want to see how thin they made this puppy.

Robert

Here ya go - it's kind of a hard shot, based on where it's at. But, I think you get the idea - it's pretty slimmed down from the previous versions I've seen. It's about the same as the Mitsu65733 I just took back, pretty skinny for a RP.
LL
LL
LL
post #69 of 15255
Just comparing specs, the difference in weight between the 60" versions is less than 4 pounds. If you look at the difference in the other brands suffering geometry problems, it is far greater. That may be a good sign.
post #70 of 15255
I am at BB in Tupelo, MS and there are none in our district yet.
post #71 of 15255
The pictures are cool and they are appreciated, but can we have some pictures of something more important to me and perhaps a few other people. I would like some pictures of the XMB menu and show what information is displayed when you hit the display button. I'm hoping for instance, that you could pop in a 1080p/24 source and see if the TV picks up on that and displays it. I currently have the 50A2000 and I'm very disappointed with the fact that it doesn't have very many details on it. Thanks
post #72 of 15255
Insly: you are the man. we are all gonna pester you till some other people get these sets. That TV looks wonderful and I hope you get some serious enjoyment from it.

If you can't find an AVIA DVD's just look at a Sar Ward DVD, they will have the "THX" optimizer.

(man I hope my 3rd Optical block is bad.........I WANT ONE OF THESE!!!!!!
post #73 of 15255
Thread Starter 
From what I've seen it won't show that it's 1080p/24, it'll just say full HD. It IS 1080p/24 though, I just returned a TV that was supposedly 1080p/24 capable and it looked NOTHING like this.

As far as the menu, I did include some of it, but it's pretty big. I'll post somre more shortly. Essentially, it looks a lot like the PS3 menu.

When hitting the display button on the PS3, it shows the compression rate during a movie, like 25-30ish mbps during scenes of Casino Royale/Apocolypto.
post #74 of 15255
Hi insly. Thanks for all the great info. I'll be tempted to cross the border from Canada to snag one of these sets when they become available. Just wondering what the build date is on your set?
post #75 of 15255
Another question raised a lot about the A3000 series is whether or not it upconverts to 1080i or 1080p. According to the press release, it is 1080i.
Can you confirm that it upconverts 480/720 to 1080p (rather than 1080i)?
post #76 of 15255
Quote:
Originally Posted by gte747e View Post

Another question raised a lot about the A3000 series is whether or not it upconverts to 1080i or 1080p. According to the press release, it is 1080i.
Can you confirm that it upconverts 480/720 to 1080p (rather than 1080i)?

It has to.
post #77 of 15255
Thread Starter 
OK, it does say 1080/24p when I hit the DISPLAY on the Sony remote for the A3000, proving that it does indeed do 1080/24p natively, as it suggests and even if it didn't say it, you could tell easily by just watching it. I'm going to attach pics of this and the menu:
LL
LL
LL
post #78 of 15255
Thread Starter 
XMB Menu: In no particular order.
LL
LL
LL
post #79 of 15255
Thread Starter 
More XMB menu:
LL
LL
LL
post #80 of 15255
Thread Starter 
Even More XMB menu:
LL
LL
LL
post #81 of 15255
Thread Starter 
Not enough? Here's more XMB menu, with even a pic of the remote:
LL
LL
LL
post #82 of 15255
Thread Starter 
..and I'm spent.
post #83 of 15255
Quote:
Originally Posted by insly View Post

..and I'm spent.

Let me personally say thanks insly. I think you understand why everyone is asking so much and seems so excited. Most thought we'd have to wait another few weeks minimum. I almost got the a2020, but got wind of this model. I'm on my way to BB now to see if they'll sell me one. (my tv went out 3 weeks ago and I can't wait much longer! )

Thanks again and take care.
post #84 of 15255
Thread Starter 
The factory build date was August.
post #85 of 15255
Quote:
Originally Posted by insly View Post

The factory build date was August.

Wow! Factory freshness! Thanks.
post #86 of 15255
very cool tv I might have to get a 60
post #87 of 15255
Thread Starter 
Linked all pics to the first post.
post #88 of 15255
Quote:
Originally Posted by insly View Post

OK, it does say 1080/24p when I hit the DISPLAY on the Sony remote for the A3000, proving that it does indeed do 1080/24p natively, as it suggests and even if it didn't say it, you could tell easily by just watching it. I'm going to attach pics of this and the menu:

If I'm not mistaken, your photo 1080p24proof.jpg (post #77) shows that the A3000 accepts 1080p24 input.
post #89 of 15255
Thread Starter 
I guess I'm slow, I hit display on the A3000 remote while watching Casino Royale, with my settings on my PS3 being 1080/24p and the TV recognized it when I hit display on the A3000 remote - meaning the TV was natively showing the signal at 1080/24p, right?
post #90 of 15255
Thanks for the pictures. This is exactly what I wanted to see. Now when people ask, "does this HDTV do 1080p/24?", (1080/24p same thing) you can just hit the display button and show it. This TV is exactly what I want!! I can't wait till my preorder ships.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Rear Projection Units
AVS › AVS Forum › Display Devices › Rear Projection Units › Official Sony KDS-XXA3000 OWNERS THREAD!