AVS › AVS Forum › Audio › Receivers, Amps, and Processors › The NAD T775/T785 AVRs w/ HDMI 1.3 Thread!
New Posts  All Forums:Forum Nav:

The NAD T775/T785 AVRs w/ HDMI 1.3 Thread! - Page 134

post #3991 of 4166
9/21/12 at 2:15pm
I have just purchased a upgrade board AM200z . Yes its a new model of AM200 board that have some improvements at least is that i was told by NAD.
Also i will have my AM100 board for sale if anyone needs it . works 100% issue free.

PS. swapfs i have send you an email
Reply
Reply

Gear mentioned in this thread:

post #3992 of 4166
9/21/12 at 2:17pm
Quote:
Originally Posted by Phil Tomaskovic View Post

I think you are referring to my private mail? I mistyped 1.34 as 1.43.
sorry!

yes i did Phil.
Reply
Reply
post #3993 of 4166
9/21/12 at 6:51pm
Hi AVS forum team, Thanks for all the advice and help. I will give everything a try and post my results when I get a little time to dedicate to the troubleshooting.

Also thank you too nosferatu2xlc. I will reply back right away! smile.gif
Reply
Reply
post #3994 of 4166
9/22/12 at 8:38am
Quote:
Originally Posted by swapfs View Post

Hi AVS forum team, Thanks for all the advice and help. I will give everything a try and post my results when I get a little time to dedicate to the troubleshooting.
Also thank you too nosferatu2xlc. I will reply back right away! smile.gif

you have PM
Reply
Reply
post #3995 of 4166
9/23/12 at 11:07am
im having a problem with Audyssy when i run the calibration on a AM200 board that i just got i get Check Type on all speakers except Left surround. It causes the Audyssy to have wrong reading and is sound really bad .
Reply
Reply
post #3996 of 4166
9/23/12 at 6:13pm
T777 vs. T787 - i dont get it. what's the difference besides 10lbs shipping weight, some additional watts and $1,000 ??

http://www.crutchfield.com/App/Product/CompareTo.aspx?compareItems=01|745T787&compareItems=01|745T777&g=10420

seems like getting the 777 is the clear choice here.

any opinions?
Reply
Reply
post #3997 of 4166
9/25/12 at 7:05am
MultEQ XT32 coming to NAD sometime next year - maybe.

from NAD customer support:

2012-09-22 13:29 MultEQ XT32
why don't any of the NAD receiver products have MultEQ XT32? there is a big difference between MultEQ XT and MultEQ XT32 - specifically subwoofer tuning.

i want to buy a NAD AVR, but i don't think i can because it doesn't have MultEQ XT32.

any advice?

Pam Anderson
2012-09-25 08:26 re: MultEQ XT32
Thank you for contacting the NAD Electronics Support Centre.

At this time, our plan is to introduce this next year but there is no timeline at this moment.

Keep watching the NAD website for future announcements.

Kind regards,

Pam Anderson
(tv)
Reply
Reply
post #3998 of 4166
9/28/12 at 9:21pm
Hi forum,

I own the 785 hd with the MDC`s AM 200, VM 200.

I also have the problem with less volume. At 0 db with my Nubert nuLine with 350 W I can relax
and snooze ;-) an I don`t remember i`m deaf ,)

Is there anyone who could send me the newest firmeware (now it`s 1.28)

Thanks

BR
Reply
Reply
post #3999 of 4166
9/29/12 at 4:08am
Hallo Axel,

ich habe ebenfalls den 785 hd mit der Software 1.28.

Könntest Du mir die 1.36 zusenden - ich habe die hier beschriebenen Volume-Probleme.

Regelung nur bis -3 db und und ei n richtiger Powersound liegt nicht vor.

Burkhard
Reply
Reply
post #4000 of 4166
9/29/12 at 6:27pm
Moin Burkhard,

sende mir deine Email - Adresse als persönliche Nachricht, dann schicke ich dir die Version zu. Deutsch am besten auch nur über PM.

Wir sollten hier im Forum lieber beim Englisch bleiben, sonst fliegen wir vielleicht raus.

Gruß, Axel
Reply
Reply
post #4001 of 4166
9/30/12 at 6:23am
Hello all,

I have owned the NAD T775 for a couple years now and so far I really like it. There is 1 minor issue that I have seen so far and I thought I saw it mentioned here in this forum but I searched and can not find it. The front panel on the NAD goes out and the only way to get it back on is to cycle the power switch on the back of the AVR. Is there a simple fix for this, other then cycling the power switch? The fw has never been updated since I've owned it.

thanks,
Mike
Reply
Reply
post #4002 of 4166
9/30/12 at 8:07am
I have owned the 775hD for over a year and really love it. I keep up with the firmware upgrades as a habit an I am on the latest 1.36 now and have had no problems.
Reply
Reply
post #4003 of 4166
9/30/12 at 9:35am
Thank for your help, Axel.

Will see, if the new firmware solve my problems.

Burkhard
Reply
Reply
post #4004 of 4166
10/7/12 at 12:54pm
does anyone have a problems when after running Audyssey room correction the after calibration results seem Bright . I tried running audyssey without sub and it ends up being really bright and with a sub its bright and boomy. Anyone has any ideas or tips on how to successfully run Audyssy. My speakers are Vienna with Primare 5ch. amp.
Reply
Reply
post #4005 of 4166
10/7/12 at 1:45pm
Quote:
Originally Posted by nosferatu2xlc View Post

does anyone have a problems when after running Audyssey room correction the after calibration results seem Bright . I tried running audyssey without sub and it ends up being really bright and with a sub its bright and boomy. Anyone has any ideas or tips on how to successfully run Audyssy. My speakers are Vienna with Primare 5ch. amp.[/q

Check out the Audyssey thread on the AVSforum. I recommend reading the FAQ. If you follow the intructions there, I suspect your brightness issues will disappear. http://www.avsforum.com/t/795421/official-audyssey-thread-faq-in-post-1
Reply
Reply
post #4006 of 4166
10/10/12 at 9:31pm
Quote:
Originally Posted by nosferatu2xlc View Post

does anyone have a problems when after running Audyssey room correction the after calibration results seem Bright . I tried running audyssey without sub and it ends up being really bright and with a sub its bright and boomy. Anyone has any ideas or tips on how to successfully run Audyssy. My speakers are Vienna with Primare 5ch. amp.

Which curve are you using? I am using the NAD one and it seems pretty good. I also turned DynamicEQ on.
Reply
Reply
post #4007 of 4166
10/17/12 at 11:55am
I was reading a post on the Audyssey Tech Talk that the Ironman Bluray disc utilizes an encode flag to automatically engage the decoding AVR's dynamic range compression resulting in a very compressed soundtrack. To overcome this a person must go into the AVR setup and turn it off once the movie starts.

This peaked my curiosity and I decided to see if my NAD T785HD had such a DRC setting. I could find no such animal other then reference to DRC when listening to DAB radio stations. Does the T785 have such a setting for movies and if it does how would I access it.?
Reply
Reply
post #4008 of 4166
10/20/12 at 7:34pm
Never mind, broke out the manual and found out how to do it.
Reply
Reply
post #4009 of 4166
10/23/12 at 9:49am
If you have v1.29 please PM me.
Reply
Reply
post #4010 of 4166
10/26/12 at 9:29pm
I believe there is a new firmware available for the NAD Txx5 products. Version 1.38 and new DSP version 1.05b. Not sure what improvements there are.
Reply
Reply
post #4011 of 4166
10/26/12 at 10:17pm
Anyone have the 1.38 FW?
Very interesting to know what it kind of improvements included.
I currently run FW 1.34 on my 785 with AM200/VM200
Reply
Reply
post #4012 of 4166
11/1/12 at 10:24pm
Have just sent my T785 w AM200/VM200 in for service.
The display showed "Check DSP Board" so I needed to have the AM200 checked, fixed or replaced.
In addition I decided to replace the VM200 with a VM150+VM150x.
Reply
Reply
post #4013 of 4166
11/2/12 at 4:14am
It is the way to go. I did the same with my T785.
Reply
Reply
post #4014 of 4166
11/2/12 at 8:34am
Can anyone give me a general idea of the cost to replace the VM200 module with the VM150/VM150x modules?
Reply
Reply
post #4015 of 4166
11/2/12 at 10:56am
I should know, but I will get a good deal. (I know it's best to have a price upfront, but I am a very good customer at this NAD dealer :-) )
Currently I am loaning a T777 from them with a AM200z/Vm150+150x card installed.
The T777 sounds very good. A nice and good sounding AVR.
Reply
Reply
post #4016 of 4166
11/4/12 at 4:09pm
Quote:
Originally Posted by cctvtech View Post

Can anyone give me a general idea of the cost to replace the VM200 module with the VM150/VM150x modules?
I think the vm150 was $550 and the 150x was $200.
Reply
Reply
post #4017 of 4166
11/5/12 at 3:02am
Quote:
Originally Posted by fiske View Post

I should know, but I will get a good deal. (I know it's best to have a price upfront, but I am a very good customer at this NAD dealer :-) )
Currently I am loaning a T777 from them with a AM200z/Vm150+150x card installed.
The T777 sounds very good. A nice and good sounding AVR.

What´s new with AM200z?
Reply
Reply
post #4018 of 4166
11/5/12 at 10:57am
Quote:
Originally Posted by Typhoon1611 View Post

What´s new with AM200z?
I asked at HIFI klubben, but they didn't know.
Reply
Reply
post #4019 of 4166
11/5/12 at 8:15pm
Quote:
Originally Posted by Typhoon1611 View Post

What´s new with AM200z?
I asked Bob Moran and he said it was just a different suffix. I'm guessing capabilites are the same
but maybe some of the chips were discontinued and had to replaced with newer versions. Just speculation on my part.
Reply
Reply
post #4020 of 4166
11/7/12 at 9:25am
Quote:
Originally Posted by prefetch View Post

MultEQ XT32 coming to NAD sometime next year - maybe.
from NAD customer support:
2012-09-22 13:29 MultEQ XT32
why don't any of the NAD receiver products have MultEQ XT32? there is a big difference between MultEQ XT and MultEQ XT32 - specifically subwoofer tuning.
i want to buy a NAD AVR, but i don't think i can because it doesn't have MultEQ XT32.
any advice?
Pam Anderson
2012-09-25 08:26 re: MultEQ XT32
Thank you for contacting the NAD Electronics Support Centre.
At this time, our plan is to introduce this next year but there is no timeline at this moment.
Keep watching the NAD website for future announcements.
Kind regards,
Pam Anderson
(tv)

Hi,

I plan to buy a T787 receiver shortly (before the end of the year probably) and I have the same concern about NAD not supporting MultEQ XT32. If NAD adds MultEQ XT32 support next year does that mean that they will release a dedicated MDC module so we could upgrade any receiver?

thanks
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Receivers, Amps, and Processors

Gear mentioned in this thread:

AVS › AVS Forum › Audio › Receivers, Amps, and Processors › The NAD T775/T785 AVRs w/ HDMI 1.3 Thread!