Originally Posted by rakstr
So my issue was really nothing to do with the CE and I had no intent on having a CE discussion here
. My issue is I can't get this receiver to perform a DL.
The instructions I had from my installer were to wait for the Almost there screen to do the 02468. This works on my other receiver most every time (I just did it and 022B
DL'd). I went back to the "failing" receiver and tried it at the Hello screen multiple times and it still will not perform the download (Tried the IR/RF switch).
So, my original Q, is there another way to force a DL and/or are there some other tips/things to check to make this work? Thanks in advance
Nope the "02468" is the only way.
Varying the timing of pressing the buttons, is about all you can do.
How are you connected to the TV? Some TVs have issues with 480i over HDMI. You might try a simple S-Video or composite cable, so you see the hello at the first chance. When it first shows up, I start pressing with clear, decisive, strokes that are half to one sec apart. You also might unplug the network cable if it's connected, as "sometimes" this can cause a problem.
It looks like they pulled the "D" version from the stream on the 3rd for the -700 and rolled back to the "B" version [
], while the -100 & -200 are still getting the "D" version.