Originally Posted by CaspianM
Try both. I did the RGB first and raised the low end black by gamma point. I chose 2.4 gamma to start with for movies and 2.2 for others.
How easy was that for you? I've been doing grayscale/gamma work for a year now with Lumagen Video Processors. The thing is I can't seem to get the gamma controls in the FPJ1 to work correctly. I use an eye 1 pro spectro and CalMAN software. The "W" is for moving all RGB's at the particular ire you are focused on at the same time for luminance or gamma control. The individual "R,G,B" controls are for balancing out grayscale. Ideally one would adjust grayscale then manipulate the gamma curve from your D6500 W point at 100% ire down to the FPJ1's 5% ire point for the desired gamma, (2.2,2.3,2.4 or 2.5).
My problem is I have to move points, ("W or R,G,B"), to far to get a change in readings from my meter, (and they seem to move opposite of what you would expect). The result was a rainbow of colors up and down grayscale ramp. If anyone has any input to go about this to attain correct results I would be grateful. Thanks, Doug G.