AVS › AVS Forum › A/V Control & Automation › Remote Control Area › Official Logitech Harmony One thread
New Posts  All Forums:Forum Nav:

Official Logitech Harmony One thread - Page 52

post #1531 of 10804
3/31/08 at 2:09pm
Quote:
Originally Posted by prsut View Post

Sorry, this is in local language, not in English...

Mam podobny problem s prepinanim kanalov na TV. Moj starsi Panasonic nedokaze prepnut kanal ak sa posle napr c. 10. Musi sa pouzit klavesa (-/-- na originalnom dialkovom a potom zadat dvojciferne cislo). Vtedy prepne najprv na 1 a hned na nulty kanal. Harmony sa da nastavit ako prepinat kanaly ale taka moznost, aby poslal najprv nejaky riadiaci prikaz (v mojom pripade tlacitko -/--) tam nie je.
Toz som napisal na tech support Logitechu a za desat minut mi prisla odpoved ze mi to UROBIA - potrebovali aby som naucil dialkove prislusny IR kod teda kod tlacitka -/--. Podotykam , ze sa to tyka spustania programov z Activities->Favorites. Z menu Devices staci pridat nove tlacitko -/-- a da sa to ovladat ako na originalnom dialkovom.

Takze oni vlastne urobia to, ze pred kazdy pokyn z Favorites, pred cislom kanala este poslu -/--.

Na nestastie som to posielal v piatok vecer a odvtedy som nepozeral na stranku tech podpory (kde mi zaregistrovali moj problem a poslali meno a heslo na pristup cez WEB).

Pokial to urobia, tak maju super podporu - mna uz sokovalo ako rychlo mi odpovedali ...

Vela stastia - skus tu tech. podporu. Ale najprv si vyskusaj ako vlastne tvoje STB funguje - ci sa ma zadavat nejake tlacitko ktore prepne STB do rezimu -- (tak ako moj panasonic TV) a potom ako sa zadavaju cisla ci 01 alebo staci 1 (niektore pristroje cakaju na druhe cislo atd...)

Toto vsetko som im ja napisal ako to potrebujem a pochopili to hned a dufam, ze to aj urobia...

Ha-spriznena duse,zdravim te ,jiz jsem svuj problem vyresil ,vse zaviselo na Inter-key Delay - 0 a Inter-Device Delay - 0 /thanks squareeyes/ .Toto nastaveni jsem pred tim nezkousel,protoze mi pripadalo pro me STB moc rychle.Dnes jsem ho ze zoufalstvi pouzil a vse jede OK vcetne dvou a vicecifernych kanalu z favorites
Problem na TV - podobny jako mas ty /-/--/ jsem vyresil hladce,udelal jsem si novy prikaz pro H1 a klavesu -/-- ze stareho ovladace pod nej priradil a rovnez funguje vse k plne spokojenosti ....
Pokud te mohu poprosit,zdel jim tady na foru,ze muj problem se zadavanim dvoucifernych cisel je vyresen a ze se jeste jednou omlouvam za muj "ostudny" prispevek a ze vsem zucastnenym dekuji !Nerad bych,aby na cesko diky me padla nejaka ostuda
Diky ti !
Reply
Reply

Gear mentioned in this thread:

post #1532 of 10804
3/31/08 at 2:16pm
This remote rocks!!!!!!!!!! I had the 1000 for a week and couldn't get it to work properly. Had the one set up and working 100% within one hour or so. Goodbye to four remotes and hello to one awesome universal.
Reply
Reply
post #1533 of 10804
3/31/08 at 2:18pm
Go back and look at settings for the CD player, you may have it set to "I use the volume on the cd player to control volume" and not the receiver.
Reply
Reply
post #1534 of 10804
3/31/08 at 2:28pm
Quote:
Originally Posted by RossiD View Post

Ha-spriznena duse,zdravim te ,jiz jsem svuj problem vyresil ,vse zaviselo na Inter-key Delay - 0 a Inter-Device Delay - 0 /thanks squareeyes/ .Toto nastaveni jsem pred tim nezkousel,protoze mi pripadalo pro me STB moc rychle.Dnes jsem ho ze zoufalstvi pouzil a vse jede OK vcetne dvou a vicecifernych kanalu z favorites
Problem na TV - podobny jako mas ty /-/--/ jsem vyresil hladce,udelal jsem si novy prikaz pro H1 a klavesu -/-- ze stareho ovladace pod nej priradil a rovnez funguje vse k plne spokojenosti ....
Pokud te mohu poprosit,zdel jim tady na foru,ze muj problem se zadavanim dvoucifernych cisel je vyresen a ze se jeste jednou omlouvam za muj "ostudny" prispevek a ze vsem zucastnenym dekuji !Nerad bych,aby na cesko diky me padla nejaka ostuda
Diky ti !

RossiD,

Prominte nemluvÃ*m Cesky, avsak neni zac.

ProsÃ*m vás, kde je divadlo?
,R
Reply
Reply
post #1535 of 10804
4/1/08 at 7:48am
The absolute on thing I would like to see Harmony add to the software for the remotes that have a touch screen that needs to be cleaned every now and then, add an option so one can create a touch button called "CLEAN" for example, that when pressed it takes you to a blank screen that doesn't send out any IR commands, once done, press the button to take you back to your current activity. I've tried covering the IR blaster at the end of the remote but then it takes the remote out of sequence. So now, I get up and walk out of the room.
Reply
Reply
post #1536 of 10804
4/1/08 at 9:01am
Quote:
Originally Posted by RGrim View Post

The absolute on thing I would like to see Harmony add to the software for the remotes that have a touch screen that needs to be cleaned every now and then, add an option so one can create a touch button called "CLEAN" for example, that when pressed it takes you to a blank screen that doesn't send out any IR commands, once done, press the button to take you back to your current activity. I've tried covering the IR blaster at the end of the remote but then it takes the remote out of sequence. So now, I get up and walk out of the room.

Yep I take mine out of the room as well to wipe down every now and then. Well, one good reason that its not RF!
Reply
Reply
post #1537 of 10804
4/1/08 at 9:32am
Quote:
Originally Posted by RGrim View Post

The absolute on thing I would like to see Harmony add to the software for the remotes that have a touch screen that needs to be cleaned every now and then,

Has anyone here tried a screen protector for the H-1?

HH
Reply
Reply
post #1538 of 10804
4/1/08 at 9:45am
Does anyone know if the Panasonic BD30 has a discrete IR code for turning subtitles on and off? The Logitech database has a soft key for it, but like dozens of other soft keys for the BD30 it doesn't work.
Reply
Reply
post #1539 of 10804
4/1/08 at 12:56pm
Received the H1 yesterday (replacing my beloved 880) all I can say is Wow. The buttons are easier to get to the the touch screen is great. It was very easy to configure just went through the software and downloaded my profile from the 880 onto the remote. I have one question though did anyone notice when you press a favorite the process of changing the channel is slow, for example if a favoritre is channel 224, there is delay of one to two seconds when each number is inputed, is there a way to speed up the inputting of a channel numbers.
Reply
Reply
post #1540 of 10804
4/1/08 at 1:07pm
Will the Harmony one be able to controll (2) Lutron IR lighting ?
Reply
Reply
post #1541 of 10804
4/1/08 at 1:08pm
Quote:
Originally Posted by yngdiego View Post

Does anyone know if the Panasonic BD30 has a discrete IR code for turning subtitles on and off? The Logitech database has a soft key for it, but like dozens of other soft keys for the BD30 it doesn't work.

I also have the BD-30 preogrammed into my ONE. When I get home I'll check and see if mine works. Can't remember but does the BD-30 remote have a button for the Subtitles, if so, why not learn the command?
Reply
Reply
post #1542 of 10804
4/1/08 at 1:08pm
Quote:
Originally Posted by Fit2Run View Post

Will the Harmony one be able to controll (2) Lutron IR lighting ?

Mine does.
Reply
Reply
post #1543 of 10804
4/1/08 at 1:19pm
Quote:
Originally Posted by rob316 View Post

Received the H1 yesterday (replacing my beloved 880) all I can say is Wow. The buttons are easier to get to the the touch screen is great. It was very easy to configure just went through the software and downloaded my profile from the 880 onto the remote. I have one question though did anyone notice when you press a favorite the process of changing the channel is slow, for example if a favoritre is channel 224, there is delay of one to two seconds when each number is inputed, is there a way to speed up the inputting of a channel numbers.

Rob,
Check out post #750 and subsequent in this thread. There are many more posts on the subject. One user actually timed his and posted a comparison of leading 0 vs. enter key input.
There are also other posts with optimum delay values for different DVRs.
,R
Reply
Reply
post #1544 of 10804
4/1/08 at 4:23pm
But it won't control them separately in the same room, they would share the same IR codes.

I have a lutron switch in my bedroom and one in my family room and each remote can be used in either room to control the lights.

Quote:
Originally Posted by RGrim View Post

Mine does.

Quote:
Originally Posted by Fit2Run View Post

Will the Harmony one be able to controll (2) Lutron IR lighting ?
Reply
Reply
post #1545 of 10804
4/1/08 at 7:32pm
I would like to know if anyone is using the Harmony One with a Time Warner cable DVR. Specifically, I want to know how the remote handles the A B and C buttons. I would like to use this remote but feel my wife will not want to use it unless she can press on an A B or C button. Can these buttons be in the touch screen area? Thanks.
Reply
Reply
post #1546 of 10804
4/1/08 at 7:54pm
Quote:
Originally Posted by HuskerHarley View Post

Has anyone here tried a screen protector for the H-1?

HH

yep thats the very first thing i did...i'm pretty anal. i used a fellowes wrightright that i picked up in walmart and have used with great success on my ipod. had to trim it to a reasonable size, but it does the job
Reply
Reply
post #1547 of 10804
4/1/08 at 8:06pm
Quote:
Originally Posted by GreggB View Post

I would like to know if anyone is using the Harmony One with a Time Warner cable DVR. Specifically, I want to know how the remote handles the A B and C buttons. I would like to use this remote but feel my wife will not want to use it unless she can press on an A B or C button. Can these buttons be in the touch screen area? Thanks.


I have seen the buttons on the touchscreen. I have an older harmony and mine work fine from the LCD screen. I'm still waiting for the Harmony One to go RF. Only after that, I will pick one up.
Reply
Reply
post #1548 of 10804
4/1/08 at 9:07pm
After watching TiVo & turning it off for the night.
Next day -turned on the TV without TiVo & TV doesn't go to the proper TV input - it stays on the TiVo input. The help button helps but I want it to get there on its own.

What should i do to remedy?
Reply
Reply
post #1549 of 10804
4/1/08 at 10:02pm
Quote:
Originally Posted by GreggB View Post

I would like to know if anyone is using the Harmony One with a Time Warner cable DVR. Specifically, I want to know how the remote handles the A B and C buttons. I would like to use this remote but feel my wife will not want to use it unless she can press on an A B or C button. Can these buttons be in the touch screen area? Thanks.

Sure! I have Red, Yellow, Blue and Green buttons on the touch screen. Unfortunately Logitech does NOT let you have customized graphics for the soft buttons. But you can have simple text, so its easy to just have A, B, C buttons but you can't get any astonishingly awesome mind-blowing graphics like SquareEyes does for the TV stations.
Reply
Reply
post #1550 of 10804
4/1/08 at 10:31pm
Hello,

if someone has Onkyo TX-SR605 and H1

I want to ask:

1. question

I've added activities like ListenCD, ... , and ListenTuner. Problem is, how Onkyo works when multiple inputTuner is entered (this is the situation, when receiver has been switched off with TUNER input active and nex time I started activity ListenTuner). Yes, receiver is ON, is on TUNER input, but band is switched (better to say toggled) from FM to AM or vice versa. This is how Onkyo works - each next InputTuner command toggles band if already on TUNER input.

How to deal with it ?

2. question

This is for my older panny TV and favorite channels. for channels 10 and more (up to 99) I must press "-/--" command BEFORE entering channel number. For now, I've learned new command "-" which equals to "-/--" from my original remote and in favorite channels I've entered "1-10" for channel 10, because I cannot enter "-10" directly. It works but ...

Is there some more elegant solution ?

Thanks for pointing me to the better way....
Reply
Reply
post #1551 of 10804
4/2/08 at 3:29am
Quote:
Originally Posted by GreggB View Post

I would like to know if anyone is using the Harmony One with a Time Warner cable DVR. Specifically, I want to know how the remote handles the A B and C buttons. I would like to use this remote but feel my wife will not want to use it unless she can press on an A B or C button. Can these buttons be in the touch screen area? Thanks.

You'll love it. Not only are the buttons in the touch area but they are color coded and use the little square, circle, triangle, icons for our colorblind friends. Very nice. Tell yor wife it's so intuitive even she can figure it out.
Reply
Reply
post #1552 of 10804
4/2/08 at 5:20am
Thanks for the info, I appreciate it. I Think I will give this remote a try.
Reply
Reply
post #1553 of 10804
4/2/08 at 5:37am
Quote:
Originally Posted by Blu-Raider View Post

You'll love it. Not only are the buttons in the touch area but they are color coded and use the little square, circle, triangle, icons for our colorblind friends. Very nice. Tell yor wife it's so intuitive even she can figure it out.

Hey ... when I bought the One I told my wife about "Wife Acceptance Points" now she kids me about how many I have !
She's a designer by trade so she appreciates the ergonomics, ease of use and lack of remote "clutter" all attributed to the One.

Frank
Reply
Reply
post #1554 of 10804
4/2/08 at 6:34am
Quote:
Originally Posted by tripleM View Post

After watching TiVo & turning it off for the night.
Next day -turned on the TV without TiVo & TV doesn't go to the proper TV input - it stays on the TiVo input. The help button helps but I want it to get there on its own.

What should i do to remedy?

Sounds like the power-on delay for the TV may be to low. Time how long it takes for the TV to power up and become responsive to commands. Then using the software, go into devices - select the TV - options - adjust the delays. 1000 ms = 1 second.

My rear projection TV takes 15 seconds (15000 ms) to power up and be ready to take commands.
Reply
Reply
post #1555 of 10804
4/2/08 at 7:34am
Quote:
Originally Posted by yngdiego View Post

Sure! I have Red, Yellow, Blue and Green buttons on the touch screen. Unfortunately Logitech does NOT let you have customized graphics for the soft buttons. But you can have simple text, so its easy to just have A, B, C buttons but you can't get any astonishingly awesome mind-blowing graphics like SquareEyes does for the TV stations.

Actually, on my one with the TW DVR, there are actual graphics for the A, B, and C buttons on the touch screen. The A is in an orange triangle, etc. This was the default setup in the software when I setup that device.

These are on the original tw dvr remote, but I don't think they are used with the moto dvr, at least in my area.
Reply
Reply
post #1556 of 10804
4/2/08 at 7:38am
Didn't Logitech confirm that with the next firmware update, there are button images on the way for DirecTV?
Reply
Reply
post #1557 of 10804
4/2/08 at 8:47am
i setup my favorite buttons, but when i press them it inputs the numbers but then waits for the channel to switch after the allotted time. how do i make it so that it enters the numbers then presses enter so it switches immediately to the channel? also is there a way to make it so that upon choosing the activity watch tv, the commads come up on the touch screen first instead of my favorites? thanks for any help.
Reply
Reply
post #1558 of 10804
4/2/08 at 9:23am
Quote:
Originally Posted by RangersFan View Post

i setup my favorite buttons, but when i press them it inputs the numbers but then waits for the channel to switch after the allotted time. how do i make it so that it enters the numbers then presses enter so it switches immediately to the channel? also is there a way to make it so that upon choosing the activity watch tv, the commads come up on the touch screen first instead of my favorites? thanks for any help.

RangersFan,
Check out post #750 and subsequent in this thread. There are many more posts on the subject. One user actually timed his and posted a comparison of leading 0 vs. enter key input.
There are other posts with optimum delay values for different DVRs. I have tweeked the delays on my SA 8300HD and switched to leading 0's rather than channel+enter and the dvr switches channels lightning fast now.
Regarding the commands coming up in your 'watch tv' activity. I don't have the software in front of me, but go the the 'set up favorites screen in the harmony software. At the top of the channel list is a inconspicuous check box that you can check off to switch which comes up on your remote first in that activity- favorites or commands.
,R
Reply
Reply
post #1559 of 10804
4/2/08 at 9:34am
Quote:
Originally Posted by TreeFrog77 View Post

Actually, on my one with the TW DVR, there are actual graphics for the A, B, and C buttons on the touch screen. The A is in an orange triangle, etc. This was the default setup in the software when I setup that device.

These are on the original tw dvr remote, but I don't think they are used with the moto dvr, at least in my area.

Logitech is slowing putting in some graphics for select equipment. I think the XBox also has graphical soft buttons for some functions. But the end user cannot change the graphics. And they don't have any such graphics for any of my equipment, many of which have colored buttons on the OEM remote.

Logitech really needs to let end users customize the graphics for all soft buttons...Randy would never get any sleep then!
Reply
Reply
post #1560 of 10804
4/2/08 at 12:28pm
Thread Starter 
Quote:
Originally Posted by yngdiego View Post

Logitech is slowing putting in some graphics for select equipment. I think the XBox also has graphical soft buttons for some functions. But the end user cannot change the graphics. And they don't have any such graphics for any of my equipment, many of which have colored buttons on the OEM remote.

Logitech really needs to let end users customize the graphics for all soft buttons...Randy would never get any sleep then!

So true about Randy!

As for the XBox they did the four buttons XYAB but not the Green X or MediaCenter, yet. I think it's coming.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Remote Control Area

Gear mentioned in this thread:

AVS › AVS Forum › A/V Control & Automation › Remote Control Area › Official Logitech Harmony One thread