||07-29-2019 06:44 PM
NX3000D Behringer not working
I posted my concern in another thread
. I thought maybe I should just start a new so I can get this figured this out as soon as possible.
I have two 10" subs wired up to the 3000 but I am unable to get Channel B to output more than 10% SPL of what I get out of Channel A. I swapped every wire to make sure it wasn't one of my 2 sub outs from my STR-1070 or one of the wires. Both subs work fine by themselves but when I try to run the NX3000D in Dual with same settings B outputs very little SPL.
Secondly, I have a $10 Nobsound 100W TPA3116D2 Amp with a 60W power supply. With the gains maxed out on both the NX3000D and Nobsound, the Nobsound is a little louder than the NX3000D. Maybe the NX3000D is a cleaner sound but does this sound right, should a 60w $10 amp beat out the 3000 on SPL?