Need help figuring out HDR dci p3 color
First I am using a jvc x790r. I got the grey scale for sdr 709 lined up nicely then that had all colors either below a delta e of 2 or maybe just above 2 so I left it alone and saved as thx mode. (Measured with x-rite colormunki display and output with hcfr on a pc with gtx 1080ti hdmi 2.0) then I had to set up the hdr mode set pc to hdr and 4K projector saw hdr and automatically switched to hdr mode with 2020 color space. I lined up the grayscale pretty well little off at 50-70% but can’t seem to get it any better. But I am having colors that are delta e of 4-7. Most colors are tracking the correct direction for the most part and blue is pretty much spot of for the p3 color space but red and green are far off. I’ll post a pic. Why am I not getting the p3 full space when this projector should hit roughly 98% and yes the filter is in place or atleast sounds like it should be. Is it hcfr, can color munki not track those colors, something else? I’m posting pics rather than screen grabs but should be clear image. Also shows where I placed the x rite so let me know if mid screen 4 inches angled up is correct.