ATTENTION: The New Domain for BruZZi's Plasma FAQ is www.bruzzi.ws
If you have a direct link to the site please uptade to the new Domain Name.
All the links in the Panasonic FAQ Thread are already updated.
I'm looking for a glossary of terms for my Panasonic Plasma Service menu. Anyone know where this could be found? Does a Service Manual exists for a 42PD25U?
nfa1934 posted some description of the service menu settings long time ago:
MTSIN (input level)
SEPAL (low frequency separation)
SEPAH (high frequency separation)
COLOR (color adjust)
TINT (tint adjust)
B-Y_G (color adjust, magenta)
CUT G (green cutoff)
CUT R (red cutoff)
CUT B (blue cutoff)
BRT (temp brightness)
R DR (red drive)
B DR (blue drive)
(A definition for R-Y_A was not listed)
I have the Service Manual for the TH-42PA20U which is similar to the 42PD25U. If you want a copy of it, send me a PM with a request.
BruZZi's Panasonic Plasma FAQ - bruzzi.ws
Lots of info for all Plasmas in general.
Looking for service menu access codes for the Akai PDP5006H 50" plasma. The Akai codes on BruZZi's site do not work for this model. This unit has an RS-232 port, which the manual says is for connecting to a PC, but doesn't say for what purpose, or what kind of cable is required. Maybe the service menu is accessed via PC? Any pointers on how to get a service manual would be much appreciated.
Reds are too pink, and yellows are a little too green, but I can't get rid of these issues from the user menus.
I am currently using an Insignia Model IS-TV040927 HDTV as a monitor in an arcade cabinet. I need to be able to adjust the overscan settings on this unit and the manufacturer warranty is not a concern for me.
I've found several posts on accessing the 'service mode' via hidden buttons inside the remote. The problem is that I purchased this unit from Best Buy as an open item...so no remote for me.
I've tried ordering a new remote through Best Buy's Part Search site...however the item has been on backorder for quite some time.
SO...my question for everyone is: Is there any other way to access service mode on these units, from inside the case? Or can I program one of my universal remotes to transmit the code(s) necessary to activate 'service mode?' I have both the Phillips Pronto Pro and the Microsoft/Harmon Kardon T1000 remotes available to me.
ANY assistance and/or direction provided would be GREATLY appreciated.