AVS Forum | Home Theater Discussions And Reviews (https://www.avsforum.com/forum/)
-   DIY Speakers and Subs (https://www.avsforum.com/forum/155-diy-speakers-subs/)
-   -   DCX2496 output configuration? (https://www.avsforum.com/forum/155-diy-speakers-subs/1095125-dcx2496-output-configuration.html)

04FLHRCI 12-11-2008 07:45 PM

Gentlemen,

I've read the manual and messed with the GUI; do I have the proper understanding here? May each of the six output channels be configured to accomodate any desired band (L/M/H)? For instance, if I were to install six subs in my room, three across the front and three across the rear; would the DCX2496 allow me to adjust each sub independently?

I have my three subs finished for the front and will likely not expand upon this until mid 2009; however, having the ability to do so without adding additional hardware would be nice.

Larry

cinema mad 12-12-2008 04:36 AM

Yes The DCX2496 will alow you to have differant settings for each of the 6 outputs....

Cheers....

penngray 12-14-2008 06:29 AM

I use the DCX with 2 3-way speakers so yes you could have ONE input sent to 6 different channels and you can set each of those channels independantly.

04FLHRCI 12-14-2008 08:07 AM

Thanks for the confirmation guys; I ordered a unit yesterday and will browse the shack to assess what's needed for REW.

Larry

cptomes 01-03-2009 09:46 AM

Quote:
Originally Posted by 04FLHRCI View Post

Thanks for the confirmation guys; I ordered a unit yesterday and will browse the shack to assess what's needed for REW.

Larry

Might as well order a spool of the Dayton balanced cable, six of the XLRs used for the outputs, an RCA and one of the XLRs for the input. Have fun soldering!

04FLHRCI 01-04-2009 11:13 AM

Cabling isn't necessary - my system is already utilizing all XLR via BJC.

I spent $12 at RadioShack on two adapters and was playing around with it last night - really great device.

Larry

btw - routing the outputs worked exactly as I desired.


Quote:
Originally Posted by cptomes View Post

Might as well order a spool of the Dayton balanced cable, six of the XLRs used for the outputs, an RCA and one of the XLRs for the input. Have fun soldering!



All times are GMT -7. The time now is 01:24 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.