So, Black Friday got me and I picked up two UL18's on sale to go in my MicroTheater. My original plan was for two microCubes, but things just got bigger as I couldn't resist the low price. Which brings me here. I really want something akin to the MiniMarty. Unfortunately, it's just too big for the room in its original shape. This is where I could use some ( a lot) of help. I'm still learning WinISD so I figured I would ask here. My plan was to lay the subs on their sides under the PJ screen. Unfortunately, that only gives me an absolute maximum of 21" height, 20" preferred. Depth isn't as much of an issue, but I really don't want to go too much deeper than 2'. For width, well, I have ~10' (5' each sub) to play with.
Given those limitations, is this something that is feasible or am I SOL? If feasible, what would the dimensions be for the box as well as the ports?My plan B is going the route of 2 MiniCubes OR sealed 4CuF flat-packs; placed up front or opposite corners front and back.
Attached below is the rough layout of the room.
Living Room-Sony 65" XBR900E, Denon X3300W, Nvidia SHIELD. 5.1.2-Ascend Acoustics CBM-170SE L/R, CMT-340Center, HTM-200SE Surround, RSL C34E Atmos, Sealed UM18-22 Sub.
"Micro Theater"-Optoma UHD51A, DIY 120" Spandex AT Screen, Denon X4400H, Sony UBP-800X, Nvidia SHIELD. 7.2.4 - DIYSG HTM-10 LCR, RSL CG3 Surround, Micca M-8C Atmos , 2 4cuf Sealed 18-22 Ultimax.