12" JBL speaker $29 on black friday at Bestbuy - AVS Forum | Home Theater Discussions And Reviews
Forum Jump: 
 833Likes
Reply
 
Thread Tools
post #1 of 2273 Old 11-11-2017, 08:16 AM - Thread Starter
Senior Member
 
rr14's Avatar
 
Join Date: Dec 2011
Posts: 436
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Liked: 30
12" JBL speaker $29 on black friday at Bestbuy

Hey guys. For those of you looking for cheap/budget 12" subs for projects, best buy is going to be having the 4 ohm ones on special for black friday. I recently used a jbl gt5 10" for a project and I was surprised how good it is for the $$$.

https://www.bestbuy.com/site/jbl-cx-...?skuId=8480035

Happy building!
dTorC4 and 18Hurts like this.
rr14 is offline  
Sponsored Links
Advertisement
 
post #2 of 2273 Old 11-11-2017, 11:45 AM
AVS Forum Special Member
 
head_unit's Avatar
 
Join Date: Sep 2005
Location: Sunny L.A.
Posts: 1,233
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked: 269
From $129 to $29-that IS a Black Friday deal. I need a DVC for a 3.some cubic foot box...I have some single coil Alpines, not bad, but I wanted to drive from two unused channels of a receiver via 5.1 analog ins. (ya, a bit crude, I know, but the boxes were free)
head_unit is offline  
post #3 of 2273 Old 11-11-2017, 03:16 PM - Thread Starter
Senior Member
 
rr14's Avatar
 
Join Date: Dec 2011
Posts: 436
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Liked: 30
Quote:
Originally Posted by head_unit View Post
From $129 to $29-that IS a Black Friday deal. I need a DVC for a 3.some cubic foot box...I have some single coil Alpines, not bad, but I wanted to drive from two unused channels of a receiver via 5.1 analog ins. (ya, a bit crude, I know, but the boxes were free)

haha, I did the same thing back in the days when I had a kenwood thx receiver that had preouts and pre in's. You gotta do what you have to do! These sound like they're down your alley then! Maybe two of them dual opposed in a smaller box. It would have been awesome if they had dvc's in your situation though.
rr14 is offline  
Sponsored Links
Advertisement
 
post #4 of 2273 Old 11-12-2017, 03:02 PM
AVS Forum Special Member
 
eng-399's Avatar
 
Join Date: Sep 2013
Location: Plainfield IL.
Posts: 5,501
Mentioned: 531 Post(s)
Tagged: 0 Thread(s)
Quoted: 2418 Post(s)
Liked: 4963
eng-399 is offline  
post #5 of 2273 Old 11-12-2017, 05:52 PM
Advanced Member
 
Join Date: May 2016
Location: Chicago, IL
Posts: 741
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Liked: 484
Quote:
Originally Posted by eng-399 View Post
can't find any ts perm's on these anyone have them
https://www.google.com/url?sa=t&source=web&rct=j&url=http://demandware.edgesuite.net/aauj_prd/on/demandware.static/-/Sites-masterCatalog_Harman/default/dw3dab5c68/pdfs/Technical%2520data-%2520CX1200%2520(English).pdf&ved=0ahUKEwib7ILJt7r XAhWJxIMKHZ0XA-oQFgglMAI&usg=AOvVaw2jqhGEoyYCHD7Xc_89_xNY
eng-399 likes this.
RoboAVS is offline  
post #6 of 2273 Old 11-12-2017, 06:27 PM
AVS Forum Special Member
 
eng-399's Avatar
 
Join Date: Sep 2013
Location: Plainfield IL.
Posts: 5,501
Mentioned: 531 Post(s)
Tagged: 0 Thread(s)
Quoted: 2418 Post(s)
Liked: 4963
eng-399 is offline  
post #7 of 2273 Old 11-12-2017, 07:08 PM
AVS Forum Special Member
 
mtg90's Avatar
 
Join Date: Aug 2011
Location: Millbrook, IL
Posts: 1,944
Mentioned: 579 Post(s)
Tagged: 0 Thread(s)
Quoted: 766 Post(s)
Liked: 1580
Identical specs to the CS1214.
https://a.d-cd.net/a59817u-960.jpg

Looks like all JBL did is change the name in the technical sheet.

Only difference between the woofers is likely to be the dust caps.
LTD02 likes this.

Last edited by mtg90; 11-12-2017 at 07:12 PM.
mtg90 is offline  
post #8 of 2273 Old 11-14-2017, 03:24 PM
AVS Forum Special Member
 
Join Date: Jun 2015
Posts: 1,621
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1018 Post(s)
Liked: 352
Quote:
Originally Posted by mtg90 View Post
Identical specs to the CS1214.
https://a.d-cd.net/a59817u-960.jpg

Looks like all JBL did is change the name in the technical sheet.

Only difference between the woofers is likely to be the dust caps.
if thats the case then thats a real DEAL

I built four of these and caught the avs forum fever and put 6 18s in my sub 1000 cu ft room.

after I came back to my senses I sold all the 18s and am now only using two of the jbl cs1214

plenty of rumble for all movies I watch

THANK YOU!!! for your selfless contribution to the audio world
Anders Torger for Brutefir
Thomas Drugeon for Rephase
John Mulcahy for room eq wizard
Denis Sbragion for DRC room correction
Juha Hartikainen for Winisd
1201 is offline  
post #9 of 2273 Old 11-14-2017, 03:34 PM
AVS Forum Special Member
 
EndersShadow's Avatar
 
Join Date: Apr 2009
Location: Indianapolis
Posts: 6,025
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 1180 Post(s)
Liked: 1445
@eng-399

Can you throw up a model that’s ported to say 30 or 40hz? Wonder how these would work for MBMs.

That ported graph looks like it’s screaming for a higher tune.


Sent from my iPhone using Tapatalk (so ignore any typos grammatical errors because my iPhone predictive text stinks)
filtor1 and unretarded like this.

My Setup | Custom MiniDSP Build | FS: If its For Sale, find it all (here)
Quote: There exists, for everyone, a sentence - a series of words - that has the power to destroy you. Another sentence exists, another series of words, that could heal you. If you're lucky you will get the 2nd, but you can be certain of getting the 1st. - Philip K. Dick
EndersShadow is online now  
post #10 of 2273 Old 11-14-2017, 05:39 PM
Advanced Member
 
1st Cav's Avatar
 
Join Date: Mar 2005
Location: TN
Posts: 898
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 299 Post(s)
Liked: 146
Quote:
Originally Posted by 1201 View Post
if thats the case then thats a real DEAL
I got a smokin deal last year on four CS1214's at 20 bucks a piece!

Quote:
I built four of these and caught the avs forum fever and put 6 18s in my sub 1000 cu ft room.

after I came back to my senses I sold all the 18s and am now only using two of the jbl cs1214
Now I'll admit that seems like slight overkill for that size room. But how do you go from six 18's to two 12's and still feel ..satisfied? Just kidding, glad it worked out for you, the JBL's are great little drivers for the price.


Sent from my SM-N910V using Tapatalk
1st Cav is offline  
post #11 of 2273 Old 11-14-2017, 07:51 PM
AVS Forum Special Member
 
eng-399's Avatar
 
Join Date: Sep 2013
Location: Plainfield IL.
Posts: 5,501
Mentioned: 531 Post(s)
Tagged: 0 Thread(s)
Quoted: 2418 Post(s)
Liked: 4963
Quote:
Originally Posted by EndersShadow View Post
@eng-399

Can you throw up a model that’s ported to say 30 or 40hz? Wonder how these would work for MBMs.

That ported graph looks like it’s screaming for a higher tune.


Sent from my iPhone using Tapatalk (so ignore any typos grammatical errors because my iPhone predictive text stinks)


Tomorrow morning I’ll do it I just seen this now I’ve been on and off the forum all day... been staining basement bar cabinets. My laptop is at home right now.
eng-399 is offline  
post #12 of 2273 Old 11-14-2017, 08:43 PM
AVS Forum Special Member
 
Join Date: Jun 2015
Posts: 1,621
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1018 Post(s)
Liked: 352
Quote:
Originally Posted by 1st Cav View Post
I got a smokin deal last year on four CS1214's at 20 bucks a piece!



Now I'll admit that seems like slight overkill for that size room. But how do you go from six 18's to two 12's and still feel ..satisfied? Just kidding, glad it worked out for you, the JBL's are great little drivers for the price.


Sent from my SM-N910V using Tapatalk
I hear you. you can only go so loud on the bass before you kill the balance between the lows and everything else.

I like my hearing and want to still have it many decades from now so I dont listen loudly. the 6 18s were down at something like -12 db to be balanced with the main speakers so they were not being utilized. just a waste of space and money.

the 2 12s Im running at +4 but they keep up just fine.
lknhomeaudio likes this.

THANK YOU!!! for your selfless contribution to the audio world
Anders Torger for Brutefir
Thomas Drugeon for Rephase
John Mulcahy for room eq wizard
Denis Sbragion for DRC room correction
Juha Hartikainen for Winisd
1201 is offline  
post #13 of 2273 Old 11-14-2017, 08:52 PM
AVS Forum Special Member
 
Join Date: Jun 2015
Posts: 1,621
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1018 Post(s)
Liked: 352
Quote:
Originally Posted by EndersShadow View Post
@eng-399

Can you throw up a model that’s ported to say 30 or 40hz? Wonder how these would work for MBMs.

That ported graph looks like it’s screaming for a higher tune.


Sent from my iPhone using Tapatalk (so ignore any typos grammatical errors because my iPhone predictive text stinks)
31.5hz tune and sealed tune, 250watts, 3.5 cu ft box

Attached Thumbnails
Click image for larger version

Name:	30hz cs1214.jpg
Views:	4542
Size:	152.6 KB
ID:	2315668  

THANK YOU!!! for your selfless contribution to the audio world
Anders Torger for Brutefir
Thomas Drugeon for Rephase
John Mulcahy for room eq wizard
Denis Sbragion for DRC room correction
Juha Hartikainen for Winisd
1201 is offline  
post #14 of 2273 Old 11-14-2017, 09:46 PM
AVS Forum Special Member
 
DavidK442's Avatar
 
Join Date: Apr 2010
Location: British Columbia, Canada
Posts: 1,662
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 866 Post(s)
Liked: 729
Quote:
Originally Posted by 1201 View Post
if thats the case then thats a real DEAL

I built four of these and caught the avs forum fever and put 6 18s in my sub 1000 cu ft room.

after I came back to my senses I sold all the 18s and am now only using two of the jbl cs1214

plenty of rumble for all movies I watch
A voice of reason! I have four of the old Infinity 1260's in ported boxes running on a single NU3000dsp and am completely satisfied.

The model for these JBL's is similar enough, just missing a couple db's in the low end.

Here is the JBL modeled for more music, or perhaps MBM duty. Porting higher than 30hz seems to make it very peaky and dropping volume really starts to curtail the low end.

(You guys are quick. I see 1201 just posted similar.)

Attached Thumbnails
Click image for larger version

Name:	JBL.jpg
Views:	4450
Size:	143.8 KB
ID:	2315680  

Last edited by DavidK442; 11-14-2017 at 09:57 PM.
DavidK442 is offline  
post #15 of 2273 Old 11-15-2017, 01:20 PM
AVS Forum Special Member
 
Join Date: Jun 2015
Posts: 1,621
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1018 Post(s)
Liked: 352
Quote:
Originally Posted by DavidK442 View Post
A voice of reason! I have four of the old Infinity 1260's in ported boxes running on a single NU3000dsp and am completely satisfied.



shhh. that's heresy around these here parts. you need your subs flat to 2 hz and capable of 150db if you want to really feel the bass.
earwaxxer, fill35U and bebb like this.

THANK YOU!!! for your selfless contribution to the audio world
Anders Torger for Brutefir
Thomas Drugeon for Rephase
John Mulcahy for room eq wizard
Denis Sbragion for DRC room correction
Juha Hartikainen for Winisd
1201 is offline  
post #16 of 2273 Old 11-15-2017, 03:57 PM
AVS Forum Special Member
 
EndersShadow's Avatar
 
Join Date: Apr 2009
Location: Indianapolis
Posts: 6,025
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 1180 Post(s)
Liked: 1445
Quote:
Originally Posted by 1201 View Post
shhh. that's heresy around these here parts. you need your subs flat to 2 hz and capable of 150db if you want to really feel the bass.
I'm running 4 of the 1260's in a 6cf box nearfield, and planning to switch out my single UM18 for an additional 3 ported sonotube 1260's tuned to around 19hz.....

Hoping that more subs spaced better = flatter more even response and the nearfield sealed will help with the ULF I was "in theory" getting from the Ultimax (but not in reality because I'm on a concrete slab).

I think moving from a 4 12's and a single 18 to 7 12's is a decent trade.... endgame is a 4 ported 1260's tuned to 19hz, and 8 x 12 nearfield sub in 10cf lol....

Problem is the 1260 and 1262's are getting harder and harder to find....

My Setup | Custom MiniDSP Build | FS: If its For Sale, find it all (here)
Quote: There exists, for everyone, a sentence - a series of words - that has the power to destroy you. Another sentence exists, another series of words, that could heal you. If you're lucky you will get the 2nd, but you can be certain of getting the 1st. - Philip K. Dick
EndersShadow is online now  
post #17 of 2273 Old 11-15-2017, 06:06 PM
AVS Forum Special Member
 
DavidK442's Avatar
 
Join Date: Apr 2010
Location: British Columbia, Canada
Posts: 1,662
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 866 Post(s)
Liked: 729
Quote:
Originally Posted by EndersShadow View Post
I'm running 4 of the 1260's in a 6cf box nearfield, and planning to switch out my single UM18 for an additional 3 ported sonotube 1260's tuned to around 19hz.....

Hoping that more subs spaced better = flatter more even response and the nearfield sealed will help with the ULF I was "in theory" getting from the Ultimax (but not in reality because I'm on a concrete slab).

I think moving from a 4 12's and a single 18 to 7 12's is a decent trade.... endgame is a 4 ported 1260's tuned to 19hz, and 8 x 12 nearfield sub in 10cf lol....

Problem is the 1260 and 1262's are getting harder and harder to find....
Why don't you move the UM18 nearfield and use the 4 X 12's you already have out into the room?
Good luck finding the Infinity's. Not sure if MoreisBetter kept his pile (32 drivers was it?). As he deemed them unworthy maybe he can spare a couple.
DavidK442 is offline  
post #18 of 2273 Old 11-15-2017, 06:12 PM
AVS Forum Special Member
 
EndersShadow's Avatar
 
Join Date: Apr 2009
Location: Indianapolis
Posts: 6,025
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 1180 Post(s)
Liked: 1445
12" JBL speaker $29 on black friday at Bestbuy

Quote:
Originally Posted by DavidK442 View Post
Why don't you move the UM18 nearfield and use the 4 X 12's you already have out into the room?

Good luck finding the Infinity's. Not sure if MoreisBetter kept his pile (32 drivers was it?). As he deemed them unworthy maybe he can spare a couple.


Not possible. The 1260s are nearfield BECAUSE they can handle a skinnier depth.

I already have 2 of the three additional ones I need and will have the third shortly....

Then I will buy extras as I see them lol....

I’m good at scrounging the web for things like that....

There are a couple on different CL within reach just need the cash to buy em and have my buddies nearby check em our and ship em to me.


Sent from my iPhone using Tapatalk (so ignore any typos grammatical errors because my iPhone predictive text stinks)

My Setup | Custom MiniDSP Build | FS: If its For Sale, find it all (here)
Quote: There exists, for everyone, a sentence - a series of words - that has the power to destroy you. Another sentence exists, another series of words, that could heal you. If you're lucky you will get the 2nd, but you can be certain of getting the 1st. - Philip K. Dick
EndersShadow is online now  
post #19 of 2273 Old 11-16-2017, 08:45 AM
AVS Forum Special Member
 
Join Date: Jun 2015
Posts: 1,621
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1018 Post(s)
Liked: 352
Quote:
Originally Posted by EndersShadow View Post
endgame is a 4 ported 1260's tuned to 19hz, and 8 x 12 nearfield sub in 10cf lol....


What is your goal?

THANK YOU!!! for your selfless contribution to the audio world
Anders Torger for Brutefir
Thomas Drugeon for Rephase
John Mulcahy for room eq wizard
Denis Sbragion for DRC room correction
Juha Hartikainen for Winisd
1201 is offline  
post #20 of 2273 Old 11-16-2017, 08:51 AM
AVS Forum Special Member
 
EndersShadow's Avatar
 
Join Date: Apr 2009
Location: Indianapolis
Posts: 6,025
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 1180 Post(s)
Liked: 1445
12" JBL speaker $29 on black friday at Bestbuy

Quote:
Originally Posted by 1201 View Post
What is your goal?




Shoot me a PM so we don’t muddy this thread up any more than we already have lol... be happy to discuss.


Sent from my iPhone using Tapatalk (so ignore any typos grammatical errors because my iPhone predictive text stinks)

My Setup | Custom MiniDSP Build | FS: If its For Sale, find it all (here)
Quote: There exists, for everyone, a sentence - a series of words - that has the power to destroy you. Another sentence exists, another series of words, that could heal you. If you're lucky you will get the 2nd, but you can be certain of getting the 1st. - Philip K. Dick
EndersShadow is online now  
post #21 of 2273 Old 11-16-2017, 09:56 AM
AVS Forum Special Member
 
Join Date: Jun 2015
Posts: 1,621
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1018 Post(s)
Liked: 352
Quote:
Originally Posted by EndersShadow View Post

Shoot me a PM so we don’t muddy this thread up any more than we already have lol... be happy to discuss.


Sent from my iPhone using Tapatalk (so ignore any typos grammatical errors because my iPhone predictive text stinks)
I mean, there has to be a decibel goal in mind.


well, I guess technically not- you may just want to have x number of subs and I guess that's ok too.

THANK YOU!!! for your selfless contribution to the audio world
Anders Torger for Brutefir
Thomas Drugeon for Rephase
John Mulcahy for room eq wizard
Denis Sbragion for DRC room correction
Juha Hartikainen for Winisd
1201 is offline  
post #22 of 2273 Old 11-16-2017, 11:46 AM
AVS Forum Special Member
 
EndersShadow's Avatar
 
Join Date: Apr 2009
Location: Indianapolis
Posts: 6,025
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 1180 Post(s)
Liked: 1445
Quote:
Originally Posted by 1201 View Post
I mean, there has to be a decibel goal in mind.


well, I guess technically not- you may just want to have x number of subs and I guess that's ok too.
Decibel goal is as loud as I can get it within what my what will allow. In all honestly, my endgame is a even response throughout the space with the 4 ported subs handling everything but ULF, and then the nearfield box "helping" where possible above tuning, but providing the ULF/tactile feel below the subs tuning through movement of the drivers, that energy transmitted to the sectional via the riser it will sit on.

I want to have MORE than I need, so I dont need to run the subs full tilt, or even at 1/2 their max wattage so I can keep the volume low and still achieve deep clean bass with lots of overhead in both the speakers and amps and very little distortion.

See end game floorplan below.

For now, sub 5 wont exist, and sub 4 is going to be 4 sealed 12's instead of a ported box, but it will be on the riser..

Click image for larger version

Name:	IMG_0273.JPG
Views:	299
Size:	170.7 KB
ID:	2316362


Sent from my iPhone using Tapatalk (so ignore any typos grammatical errors because my iPhone predictive text stinks)

My Setup | Custom MiniDSP Build | FS: If its For Sale, find it all (here)
Quote: There exists, for everyone, a sentence - a series of words - that has the power to destroy you. Another sentence exists, another series of words, that could heal you. If you're lucky you will get the 2nd, but you can be certain of getting the 1st. - Philip K. Dick

Last edited by EndersShadow; 11-16-2017 at 11:51 AM.
EndersShadow is online now  
post #23 of 2273 Old 11-16-2017, 12:32 PM
AVS Forum Special Member
 
Join Date: Jun 2015
Posts: 1,621
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1018 Post(s)
Liked: 352
Quote:
Originally Posted by EndersShadow View Post
Decibel goal is as loud as I can get it within what my what will allow. In all honestly, my endgame is a even response throughout the space with the 4 ported subs handling everything but ULF, and then the nearfield box "helping" where possible above tuning, but providing the ULF/tactile feel below the subs tuning through movement of the drivers, that energy transmitted to the sectional via the riser it will sit on.

I want to have MORE than I need, so I dont need to run the subs full tilt, or even at 1/2 their max wattage so I can keep the volume low and still achieve deep clean bass with lots of overhead in both the speakers and amps and very little distortion.

See end game floorplan below.

For now, sub 5 wont exist, and sub 4 is going to be 4 sealed 12's instead of a ported box, but it will be on the riser..

Attachment 2316362


Sent from my iPhone using Tapatalk (so ignore any typos grammatical errors because my iPhone predictive text stinks)
ok.


good luck with the project.

THANK YOU!!! for your selfless contribution to the audio world
Anders Torger for Brutefir
Thomas Drugeon for Rephase
John Mulcahy for room eq wizard
Denis Sbragion for DRC room correction
Juha Hartikainen for Winisd
1201 is offline  
post #24 of 2273 Old 11-23-2017, 11:42 AM
AVS Forum Special Member
 
hd0823's Avatar
 
Join Date: Oct 2015
Posts: 1,969
Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 715 Post(s)
Liked: 1311
Anyone snag these up today

Sent from my SM-N950U using Tapatalk
hd0823 is online now  
post #25 of 2273 Old 11-23-2017, 01:56 PM
AVS Forum Special Member
 
EndersShadow's Avatar
 
Join Date: Apr 2009
Location: Indianapolis
Posts: 6,025
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 1180 Post(s)
Liked: 1445
Quote:
Originally Posted by hd0823 View Post
Anyone snag these up today

Sent from my SM-N950U using Tapatalk


None within a 100 mike radius of me lol


Sent from my iPhone using Tapatalk (so ignore any typos grammatical errors because my iPhone predictive text stinks)

My Setup | Custom MiniDSP Build | FS: If its For Sale, find it all (here)
Quote: There exists, for everyone, a sentence - a series of words - that has the power to destroy you. Another sentence exists, another series of words, that could heal you. If you're lucky you will get the 2nd, but you can be certain of getting the 1st. - Philip K. Dick
EndersShadow is online now  
post #26 of 2273 Old 11-23-2017, 02:02 PM
AVS Forum Special Member
 
hd0823's Avatar
 
Join Date: Oct 2015
Posts: 1,969
Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 715 Post(s)
Liked: 1311
I was thinking about adding some but think I'm just going to add the other 2 submaximus v3s or 4 of the bc 21ds115. I do like the idea of near field it just messes up my site lines. Just hard when 8 of these cost barely anything.

Sent from my SM-N950U using Tapatalk
hd0823 is online now  
post #27 of 2273 Old 11-23-2017, 03:01 PM
Senior Member
 
Madaeel's Avatar
 
Join Date: Jul 2009
Posts: 494
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 179 Post(s)
Liked: 163
Picked up 8 of em for NF.
EndersShadow likes this.
Madaeel is online now  
post #28 of 2273 Old 11-23-2017, 11:26 PM
Advanced Member
 
bebb's Avatar
 
Join Date: Sep 2017
Location: Middle Illinois
Posts: 578
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked: 156
Just bought 3

Not sure what I will use them for yet but got 3 based on what others here have said about them.
bebb is offline  
post #29 of 2273 Old 11-24-2017, 08:05 AM
Member
 
elnino2783's Avatar
 
Join Date: Jan 2007
Posts: 48
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked: 11
Could this sub be used to build a reasonably priced/sized sonosub that can do 20hz?

I'm really new to this stuff, and was hoping to get away with a build that's less than a few hundred dollars that can outperform anything in the $500 range.

I currently have none of the materials for a build, but have plenty of tools available.
elnino2783 is offline  
post #30 of 2273 Old 11-24-2017, 04:52 PM
Member
 
Rcris's Avatar
 
Join Date: Oct 2014
Location: TX
Posts: 195
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 84 Post(s)
Liked: 103
Bought a few of these today at BB, @LTD02 , @eng-399 : can you suggest a box for this driver something similar to Iclops
Rcris is online now  
Sponsored Links
Advertisement
 
Reply DIY Speakers and Subs

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off