, could you please inform on the depth for the Volts2, 6.5" and 8" options, just the drivers alone, without the boxes.
The idea is attach them to these round OEM Systems Frameless Baffle.
The Volt-6 with the 1010 is 4.5" deep, or 4.125" deep from the back of the mounting flange (surface mounting).
The Volt-8 with the 1446 is 5.125" deep, or 4.75" deep from the back of the mounting flange.
The Volt-10 with the 1446 is 6.125" deep, or 5.625" deep from the back of the mounting flange.
I recommend adding 1/2" to the depth figures of the Volt-8/10 to leave room for connectors on the inputs of the compression driver unless using right angle connectors.
Location: Tucson, AZ, Telluride, CO, & Los Angeles,CA, USA
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 508 Post(s)
Originally Posted by mobeer4don
Has anyone found a 10" ring and grill cover for wall/ceiling installs? There was a reference above for an 8" version...was hoping someone came up with a 10" over the last 6 or 8 months.
I found round ones at PE. See photos in post #8 on my configuration page in signature block below. I think I also had a build thread back in late 2015 or early 2016 you could search out. I had photos of installation tips/surprises there.