Ht 1.0 - Page 2 - AVS Forum | Home Theater Discussions And Reviews
Forum Jump: 
 35Likes
Reply
 
Thread Tools
post #31 of 54 Old 12-09-2018, 08:17 PM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Received my screen on Friday via Fedex. Packaging was pretty banged up but the internal contents appear to be intact. Screen is AT - Seymour AV Centerstage XD 133" 2.40 with led lit metro frame and manual masking panels. I ended up spending lot more on the screen than I had initally planned to. I hope it turns out to be as good as I am expecting it to.








Due to delay in the 2019 model release, I went ahead and ordered a consumer version X790 (RS540).

Also, received a pair of Rythmik FV15HPs. Thanks Enrico @enricoclaudio for all the help and advice both off and on the forum.

On sidenote, Monoprice had their Monolith amps on sale on BF so went ahead and added this beast to my living room system. Still trying to get the 12V trigger control work between it and the Yamaha AVR.




Attached Thumbnails
Click image for larger version

Name:	20181205_150326.jpg
Views:	365
Size:	515.1 KB
ID:	2494460   Click image for larger version

Name:	20181205_150400.jpg
Views:	369
Size:	484.2 KB
ID:	2494462   Click image for larger version

Name:	20181205_133114.jpg
Views:	375
Size:	961.4 KB
ID:	2494464  
bubbrik likes this.

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2

Last edited by nonstopdoc1; 12-09-2018 at 08:24 PM.
nonstopdoc1 is online now  
Sponsored Links
Advertisement
 
post #32 of 54 Old 12-16-2018, 08:17 AM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Received my projector on friday.
Attached Thumbnails
Click image for larger version

Name:	20181213_210924.jpg
Views:	58
Size:	1,009.3 KB
ID:	2497592  

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #33 of 54 Old 12-19-2018, 05:04 PM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
My GC started building the baffle and screen wall today. Paint looks much better now as the lights in the room are functioning. I covered the window with a piece of drywall painted black.






Screen, ceiling speakers and projector goes on tomorrow. Getting close!!
Attached Thumbnails
Click image for larger version

Name:	20181219_111419.jpg
Views:	330
Size:	835.1 KB
ID:	2498792   Click image for larger version

Name:	20181219_154437.jpg
Views:	325
Size:	658.6 KB
ID:	2498794  

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
Sponsored Links
Advertisement
 
post #34 of 54 Old 12-26-2018, 06:27 AM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
I hate these awful stickers! Took me 20 minutes to get the damn thing off.

Attached Thumbnails
Click image for larger version

Name:	20181225_094334.jpg
Views:	311
Size:	882.3 KB
ID:	2500780  

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #35 of 54 Old 12-26-2018, 06:34 AM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Spray painted the diffusers last night.

Attached Thumbnails
Click image for larger version

Name:	20181222_203848.jpg
Views:	310
Size:	633.8 KB
ID:	2500782  

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #36 of 54 Old 12-26-2018, 09:43 PM
Senior Member
 
Little Chris's Avatar
 
Join Date: Jan 2011
Location: Denmark
Posts: 263
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 100 Post(s)
Liked: 234
WOW you are cruising through this. Very nice!!

I haven’t heard of an “LED lit metro frame” before, but it sounds cool. Looking forward to seeing what it is when you show us some pictures of it

My Small Home Theater Build
JVC RS400 / 110" 2.40:1 Curved DIY AT Screen w. Masking / Prismasonic A-Lens / Marantz SR7011 / Emotiva XPA-5 / Behringer EP4000 / Oppo UDP-203 / PS4 Pro / Apple TV 4K / 7.2.2 Surround / DIY LCR's / 4xFI IB3 15" IB Sub
Little Chris is offline  
post #37 of 54 Old 12-27-2018, 06:27 AM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
I had the whole house surge protector installed.

Eaton Whole House Surge Protector

Attached Thumbnails
Click image for larger version

Name:	20181225_200119.jpg
Views:	288
Size:	954.5 KB
ID:	2501266  
luisev likes this.

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #38 of 54 Old 12-27-2018, 06:28 AM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Quote:
Originally Posted by Little Chris View Post
WOW you are cruising through this. Very nice!!

I haven’t heard of an “LED lit metro frame” before, but it sounds cool. Looking forward to seeing what it is when you show us some pictures of it
I haven't had the time to test the light with all the surrounding fabric frames on. The light doesn't seem to be very bright. Will post pictures when its complete.

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #39 of 54 Old 12-27-2018, 06:37 AM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Installed all the speakers last night. Ran out of black theater board. I bought 6 panels but it fell short of covering the whole area. I don't want to buy another 6 panels just cover the small area.









Attached Thumbnails
Click image for larger version

Name:	20181226_204130.jpg
Views:	303
Size:	624.8 KB
ID:	2501268   Click image for larger version

Name:	20181226_204200.jpg
Views:	290
Size:	918.1 KB
ID:	2501270   Click image for larger version

Name:	20181226_210444.jpg
Views:	302
Size:	948.6 KB
ID:	2501272   Click image for larger version

Name:	20181226_210647.jpg
Views:	302
Size:	794.6 KB
ID:	2501274   Click image for larger version

Name:	20181226_211114.jpg
Views:	303
Size:	523.2 KB
ID:	2501276  


My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #40 of 54 Old 12-28-2018, 01:32 PM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Last night I cleaned the room where the equipment rack is going to go. There was tons of dust from construction work. It took me few hours to get the whole thing clean enough that I feel comfortable opening and setting up the equipment. That is on my 'to do' list for tonight after work. Carpet is lot 'grayer' in person than the pictures suggest. Tomorrow the seats are going to be delivered and plan is to hang the acoustic treatments.

On the home stretch now! Excited!



Attached Thumbnails
Click image for larger version

Name:	20181226_193502.jpg
Views:	286
Size:	379.6 KB
ID:	2502016   Click image for larger version

Name:	20181221_112539.jpg
Views:	298
Size:	421.2 KB
ID:	2502018  
chriscmore, femi, pkinneb and 2 others like this.

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #41 of 54 Old 01-03-2019, 12:14 PM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Acoustic treatments going up.













Need couple of more yards of fabric to finish the job.
Attached Thumbnails
Click image for larger version

Name:	20190102_153412.jpg
Views:	290
Size:	283.2 KB
ID:	2505126   Click image for larger version

Name:	image006.jpg
Views:	287
Size:	300.3 KB
ID:	2505128   Click image for larger version

Name:	image005.jpg
Views:	295
Size:	307.8 KB
ID:	2505130   Click image for larger version

Name:	image004.jpg
Views:	290
Size:	343.2 KB
ID:	2505132   Click image for larger version

Name:	image003.jpg
Views:	286
Size:	295.7 KB
ID:	2505134  

Click image for larger version

Name:	image002.jpg
Views:	284
Size:	259.9 KB
ID:	2505136   Click image for larger version

Name:	image001.jpg
Views:	285
Size:	301.1 KB
ID:	2505138  
jjcook and rboster like this.

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #42 of 54 Old 01-09-2019, 12:21 PM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Here are the 4 Octane Flash HR seats that I got last week. I like them a lot. They have the right amount of firmness at least brand new. I haven't encountered any problems yet.






My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #43 of 54 Old 01-09-2019, 12:33 PM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Last night I spent 2 hours trying to get the AVR and QSC DPA 4.2 amp (for LCR) running. All connections seemed fine but i was getting no sound out of the speakers.

I bought these Atlas Signal Male RCA-to-Phoenix adapter cables (AS2RCA-1M-PHX)



Searched online and for a change went through the amplifier manual. Amp was sending pink noise in test mode but no sound was coming whenever I played any content through AVR. I was ready to give up, until I realized that RCA-PHX cable wires were wrongly connected to the phoenix connector. Red (positive) cable was connected in the place where ground should have been and vice versa. I stripped the sleeves and rewired the phoenix connector and voila everything started working. So much for buying pre-terminated commercial cables for $$$.
Attached Thumbnails
Click image for larger version

Name:	g9782RCAPHX-F-1.jpg
Views:	294
Size:	9.3 KB
ID:	2508332  

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #44 of 54 Old 01-09-2019, 07:12 PM
Advanced Member
 
sirjaymz's Avatar
 
Join Date: Dec 2008
Location: Houston<>Anchorage
Posts: 931
Mentioned: 35 Post(s)
Tagged: 2 Thread(s)
Quoted: 424 Post(s)
Liked: 510
Quote:
Originally Posted by nonstopdoc1 View Post
Last night I spent 2 hours trying to get the AVR and QSC DPA 4.2 amp (for LCR) running. All connections seemed fine but i was getting no sound out of the speakers.

I bought these Atlas Signal Male RCA-to-Phoenix adapter cables (AS2RCA-1M-PHX)



Searched online and for a change went through the amplifier manual. Amp was sending pink noise in test mode but no sound was coming whenever I played any content through AVR. I was ready to give up, until I realized that RCA-PHX cable wires were wrongly connected to the phoenix connector. Red (positive) cable was connected in the place where ground should have been and vice versa. I stripped the sleeves and rewired the phoenix connector and voila everything started working. So much for buying pre-terminated commercial cables for $$$.

Those are the 'gotcha's' that nobody tells you about that you will have to endure during the builds..
I had something similar with my Klipsch power subwoofer. Got a nasty 60hz hum coming from it brand new out of the box.. Only until I opened it up did I identify that the factory wired the power input to the plate amplifer incorrectly. Line was going to Neutral and Neutral was going to the Line input. Correct that .,.. and just like you, all was well.
Additionally, had the wires from Monoprice show up , to go from RCA, unbalanced to XLR balanced, and again, just like you, wired incorrectly. Same type of repair on mine..


In the end, I am glad you figured it out and got the audio working. Always a success when things work the way they are suppose to
nonstopdoc1 likes this.

HT1.0 | HT2.02
JVC RS-2000 / Xbox One X / nVidia Shield / DIY treatments
Seymour AV Center Stage 130" 2.35 / Denon 7200WA / Denon 6300 / 2x miniDSP2x4HD
iNuke NU6000DSP / iNukeNU3000DSP / 2x Klipsch R-112SW / 2x UM18-22 / 12x JBL 12"
11.2(16).6 Atmos/Klipsch RF-82/RC-64II/RS-42/RS-41/BS-62/CDT3800-C-II
sirjaymz is online now  
post #45 of 54 Old 03-25-2019, 07:05 AM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
The room is essentially complete and we have been watching movies for the last couple of months. Lately I have been very busy with work and travel. I haven't had a chance to post the finished pics on the thread as you very well know once you start watching movies, any pending work slows down to a snail's pace

- I still have to fix the led light around the screen as the connector appears to be damaged.
- I only got 2 subs as of now and both are in the front. Somehow Audyssey is setting them to -12db. I have downloaded the editor app on ipad and I will try to re -run the audssey setup one more time. I am planning to add the rear subs in future. I also had to place the subs sideways (facing outwards) due to space constraints.
- I got the JVC RS540 due to delay in release of the new lineup.
- I still have to get the bar table and stools for the second row

Here are some pics of the front. The rear wall is finished but I have not been able to take any pictures recently. The screen is without the manual masking panels which I use for 16:9 content.






Attached Thumbnails
Click image for larger version

Name:	20190102_153336.jpg
Views:	219
Size:	857.7 KB
ID:	2544076   Click image for larger version

Name:	20190102_153340.jpg
Views:	206
Size:	638.9 KB
ID:	2544078   Click image for larger version

Name:	20190102_153330.jpg
Views:	207
Size:	567.5 KB
ID:	2544080   Click image for larger version

Name:	20190107_205842.jpg
Views:	213
Size:	928.2 KB
ID:	2544082   Click image for larger version

Name:	20190107_205748.jpg
Views:	210
Size:	1.29 MB
ID:	2544084  

Click image for larger version

Name:	20190102_153400.jpg
Views:	207
Size:	708.3 KB
ID:	2544086  
mmorriskc, pkinneb, 4fit? and 1 others like this.

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #46 of 54 Old 04-10-2019, 11:33 AM
Advanced Member
 
iceatola's Avatar
 
Join Date: May 2014
Posts: 514
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 250 Post(s)
Liked: 227
Quote:
Originally Posted by nonstopdoc1 View Post
The room is essentially complete and we have been watching movies for the last couple of months. Lately I have been very busy with work and travel. I haven't had a chance to post the finished pics on the thread as you very well know once you start watching movies, any pending work slows down to a snail's pace

- I still have to fix the led light around the screen as the connector appears to be damaged.
- I only got 2 subs as of now and both are in the front. Somehow Audyssey is setting them to -12db. I have downloaded the editor app on ipad and I will try to re -run the audssey setup one more time. I am planning to add the rear subs in future. I also had to place the subs sideways (facing outwards) due to space constraints.
- I got the JVC RS540 due to delay in release of the new lineup.
- I still have to get the bar table and stools for the second row

Here are some pics of the front. The rear wall is finished but I have not been able to take any pictures recently. The screen is without the manual masking panels which I use for 16:9 content.










System looks real good, did you add any more subs or speakers ???

Video: Optoma HD143X projector - Elite Screens Manual Grande Series - 128inch
Receiver: Emotiva Fusion 8100 / Amps: Emotiva XPA-3, UPA-700
Polk Signature Series - S60 Towers for L/R, S35 Center, S15 Surrounds
Subwoofer PSA 2xV1801
Roku 4, Nvidia Shield, Xiaomi Mi Box S, Darbee Darblet 5000
iceatola is offline  
post #47 of 54 Old 04-10-2019, 12:05 PM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Quote:
Originally Posted by iceatola View Post
System looks real good, did you add any more subs or speakers ???
I am currently at 7.2.4

LCR - Procella P8
Surrounds - Procella P5V x 4
Atmos - Revel C763L x 4
Subs - Rythmik FV15HP

I am planning to add 2 more subs in rear to move to 7.4.4 setup.
iceatola likes this.

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #48 of 54 Old 04-11-2019, 08:07 PM
Advanced Member
 
jason4vu's Avatar
 
Join Date: Jan 2002
Location: Nashville, TN
Posts: 518
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 131 Post(s)
Liked: 217
Really like the clean design of this room. Well done
nonstopdoc1 likes this.
jason4vu is offline  
post #49 of 54 Old 05-06-2019, 07:18 PM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
So I finally upgraded the sub in my living room system.

Welcome the twins!





I don't know why these pics are uploading rotated.





Attached Thumbnails
Click image for larger version

Name:	20190506_100904.jpg
Views:	193
Size:	1.19 MB
ID:	2563448   Click image for larger version

Name:	20190506_100253.jpg
Views:	192
Size:	911.0 KB
ID:	2563450   Click image for larger version

Name:	20190506_152847.jpg
Views:	193
Size:	916.4 KB
ID:	2563452   Click image for larger version

Name:	20190506_100355.jpg
Views:	192
Size:	1.81 MB
ID:	2563454   Click image for larger version

Name:	20190506_10034.jpg
Views:	204
Size:	1.13 MB
ID:	2563456  

jjcook and MinHeadroom like this.

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #50 of 54 Old 06-01-2019, 11:07 PM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
I received my AT528NC couple of days ago. I intend to use to for surrounds and Atmos for now. I currently have Denon AVR but plan to upgrade to PrePro later this year. I looked into D-Sonic but the shorter warranty and concern with long term support drove me towards ATI. I have a QSC DPA 4.2 which I am currently using for LCR. Its cheaper and on paper has lot more power but I don't want to deal with euro block connectors etc. anymore.

Here is the beast!





Installed it last night. Spent lot of time rearranging the equipment in my rack. I still need to find some time to do some better cable management btw. Tested all channels working but haven't had a chance to demo it yet.

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #51 of 54 Old 06-05-2019, 01:04 PM
Senior Member
 
optoguy's Avatar
 
Join Date: Jul 2007
Posts: 237
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Liked: 33
I can't believe I missed this thread! I really like the clean look as well. Looks good!

Any comments on how it sounds?


Darren
optoguy is online now  
post #52 of 54 Old 06-09-2019, 07:22 PM
AVS Forum Special Member
 
darthray's Avatar
 
Join Date: Jul 2005
Location: Cold lake Alberta Canada
Posts: 6,276
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 2094 Post(s)
Liked: 2980
darthray is online now  
post #53 of 54 Old 07-14-2019, 04:54 AM - Thread Starter
Advanced Member
 
nonstopdoc1's Avatar
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 750
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked: 112
Quote:
Originally Posted by optoguy View Post
I can't believe I missed this thread! I really like the clean look as well. Looks good!

Any comments on how it sounds?


Darren
Sounds good. I am still trying to iron out issues with bass calibration and issues with hum/hisses. Eventually plan to add 2 subs in rear. Looking into various options. Thanks for checking in!

My Build Thread
HT - Seymour Centerstage XD 2.39:1 133" W| JVC X790R | Denon AVR | QSC DPA 4.2 | ATI AT528NC | Procella P8/P5V | Revel C763L | Rythmik FV15HP x2
Living Room - LG OLED 65" | Yamaha 2060 | Monolith 3x200 | KEF Q900 L/R | Paradigm Millenia CC | Polk Surrounds | Monolith 12" Subs x 2
nonstopdoc1 is online now  
post #54 of 54 Old 07-14-2019, 06:41 PM
AVS Forum Special Member
 
darthray's Avatar
 
Join Date: Jul 2005
Location: Cold lake Alberta Canada
Posts: 6,276
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 2094 Post(s)
Liked: 2980
Quote:
Originally Posted by nonstopdoc1 View Post
Sounds good. I am still trying to iron out issues with bass calibration and issues with hum/hisses. Eventually plan to add 2 subs in rear. Looking into various options. Thanks for checking in!

Hum and hisses, are always a bummer. And wishing all the best, to eliminate them.
For checking your room, my pleasure
I always enjoy seeing other members set-up


Darth
darthray is online now  
Sponsored Links
Advertisement
 
Reply Dedicated Theater Design & Construction

Tags
Home Theater

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off