AVS Forum | Home Theater Discussions And Reviews (https://www.avsforum.com/forum/)
-   Dedicated Theater Design & Construction (https://www.avsforum.com/forum/19-dedicated-theater-design-construction/)
-   -   Seamless (as possible) black velvet on false wall (https://www.avsforum.com/forum/19-dedicated-theater-design-construction/3147826-seamless-possible-black-velvet-false-wall.html)

ltalbrecht 05-23-2020 09:40 AM

Seamless (as possible) black velvet on false wall
 
1 Attachment(s)
Built out a false wall for an AT screen. The screen will take up the entire middle aspect of the wall. I have to cover above it, below it, and the side of the wall. The other side is up against the wall. So I have no problem and no seams at the front. I am really having a hard time (I am not a spacial visualization person) figuring out how to create the side wall with the velvet and having as minimal seam(s) as possible. Any recommendations??

SteveCallas 05-23-2020 09:45 AM

If I am understanding your request correctly, staple the velvet to a new 2x4, frame the 2x4 in against the front wall, then pull it taught around the corner and staple it to the front framing.

genaccmiller 05-23-2020 09:45 AM

Quote:

Originally Posted by ltalbrecht (Post 59695836)
Built out a false wall for an AT screen. The screen will take up the entire middle aspect of the wall. I have to cover above it, below it, and the side of the wall. The other side is up against the wall. So I have no problem and no seams at the front. I am really having a hard time (I am not a spacial visualization person) figuring out how to create the side wall with the velvet and having as minimal seam(s) as possible. Any recommendations??

Black velvet is very dark. You may not see the seams.

Sent from my GM1917 using Tapatalk

BIGmouthinDC 05-23-2020 09:49 AM

1 Attachment(s)

BIGmouthinDC 05-23-2020 09:58 AM

1 Attachment(s)
wall to a small hallway seam, if this was black it would be even less noticeable. You staple fabric to a piece of furring, then screw the furring into position and pull the fabric around. Hide the top and bottom staples with molding. The alternative is to do a wall size frame, wrap and staple then mount the frame.


https://www.avsforum.com/forum/attac...1&d=1590253085


All times are GMT -7. The time now is 11:34 PM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.