For sale, one piece of Stewart StudioTek130 Microperf screen material with minor blemishes (see pics). Piece of material has the following specs:

Screen Material Only.
Snap Spacing: 4in
Image Size: 56in x 131.5in (143in diag.)
Aspect Ratio 2.35:1
Material: StudioTek 130 MicroPerf Front Projection Seamless
Screen Material OD: 61.625in x 138in

Again, this is SCREEN MATERIAL ONLY. It does have snaps if you are lucky enough to have an existing frame from Stewart However, most likely scenario would be to adapt this screen material to a custom frame, or order a new frame from Stewart. The material is being swapped out from our demo screen since it has some minor blemishes from an event we did, and we want our demo screen to be perfect. The blemishes and slight wrinkles are for all intents and purposes invisible with video content, however they can be seen if you bring up a full white test pattern, but honestly - only if you go looking for it. The upshot is that this MSRP $6254 piece of screen material can be yours for only $1500 plus shipping - more than 75% off.

Note pics below. Blemishes are hard to see except from certain angles. Shading differences in the pics are due to shadows / camera positioning.

Please contact me via PM or at 719-460-8182 with any questions or concerns.














Thanks!

Attached Thumbnails

         

Can't some soap and water take care of those little blemishes, John?

Honest answer as to why we haven't tried harder to remove them with mild detergent and water:

1. As I mentioned, the marks are essentially invisible with video content.

2. If you scrub too hard, you can remove the optical coating from the vinyl.

So, because of #1 , we haven't taken the risk of #2 .

Sold!