AVS Forum | Home Theater Discussions And Reviews (https://www.avsforum.com/forum/)
-   Digital Hi-End Projectors - $3,000+ USD MSRP (https://www.avsforum.com/forum/24-digital-hi-end-projectors-3-000-usd-msrp/)
-   -   Losing some functions of the Sony VPLHW50ES: Problem Solved (https://www.avsforum.com/forum/24-digital-hi-end-projectors-3-000-usd-msrp/1520482-losing-some-functions-sony-vplhw50es-problem-solved.html)

anmg 03-01-2014 03:29 PM

I have HTPC (nvidia GTX660) connected to a Emotiva UMC-200 and then out to a Sony HW50ES projector. I get sound and video but I lose some of the functionality of the projector. The projector sees the signal as 3d and turns the lamp brightness to high and no iris function. If I force the signal to 2d in the projector, I can then turn the lamp down but no auto iris or simulated 3d functionality. If I connect the HTPC directly to the projector, then all functions return. If I run a blu ray player through the UMC-200 and out to the projector all functions of the projector are also good. I should be able to set the projector to auto 3d (meanig the projector determines whether to set 3d or 2d), but then the problems return. This has to be a problem with either the UMC-200 or the projector, since there is no problem with a direct hdmi connection from the HTPC to the projector.

I have been pulling my hair out the last 2 days trying to figure this out. Sony is no help. They just say that if the signal is good going in to the projector it will function properly. Something must be happening to the hdmi video signal while it is in the UMC-200 to make it look like a 3d signal or something.

Anyone have any experience with this?

Mike Garrett 03-02-2014 07:10 AM

Sounds like a problem with the UMC-200, since you can connect the HTPC directly to the projector and every thing works fine. Only when you add the UMC-200 do you get the problem. The Emo pre/pro's are notorious for having glitches.

anmg 03-02-2014 09:04 AM

Problem solved. Turned out to be a setting in the Nvidia control panel. If you disable the 3d setting in Nvidia, all functions of the projector will work when watching 2d. You just have to remember to enable it again, when you want to watch a 3d movie.

All times are GMT -7. The time now is 05:52 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.