Originally Posted by Agenor
As far as I know, the Dynamic Contrast has been improved from v.1.30 to v.1.31.
To my knowledge the LS10000 is limited to 8bit Output, thus forcing everything other (10/12bit) will not work.
There is no preset for that. To gain the highest lumen output or get a brighter picture at the LS10000 you should choose following settings:
- color mode without a filter (Natural, THX?, Dynamic?),
- lens iris = 0,
- Power consumption = high
- if possible without crushing blacks: set brightness up
- if possible without loosing details on brighter scenes: set gamma to a higher value
LS10k is limited to 8bit (dithering) with 4K input. but it accepts 10bit or 12bit signals.
Dynamic preset is the brightest out of the box and fine for sports.
Epson EH-LS10000, madVR on GTX 1080, Oppo UDP-203, Oppo BDP-EU93, Toshiba HD E1, Dreambox 900 ultraHD, Xodiac masked, AT, 3m scope (2.40:1), Marantz SR7011
3x Klipsch PRO-7800-L-THX, 6x Klipsch PRO-7800-S-THX (Dolby Atmos setup, 5.2.4)
2x Velodyne SC-600IW, Velodyne SC-602
Middle Atlantic Rack, RTI XP-6 control processor, RTI T2x remote, LUTRON Graphics Eye QS