Official JVC RS600 / RS500 (X950R / X750R - X9000 / X7000) Owners Thread - Page 1066 - AVS Forum | Home Theater Discussions And Reviews
Forum Jump: 
 84694Likes
Reply
 
Thread Tools
post #31951 of 31987 Old 07-11-2019, 10:18 AM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by Pip View Post
I have an RS 500 and a Harmony remote. I had the same issue and was able to add a third lens memory by adding the RS 640 as a device. I can’t remember if the 640 has three dedicated memory buttons, or if the harmony database has more memory options. But by transferring the command over from the 640, I got direct access to the third memory.

I have no idea how the C4 system works. I’m posting just in case something like this may work for you.

Good luck,

Pip
Thanks for the reply, Pip.

I have previously used a Harmony Hub/Remote, although I never found a way to add more lens memories directly.

For Control4, all I need is the actual long hex IR code that the Harmony would be emitting, and I can then manually copy/paste that code into the Control4 Program.

I'll have to see if there is a way to obtain those codes from Harmony, as that might just do the trick.

Was it only a 3rd Memory slot that using the 640 gave you, or were there more available?

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
Sponsored Links
Advertisement
 
post #31952 of 31987 Old 07-11-2019, 12:25 PM
Pip
Advanced Member
 
Pip's Avatar
 
Join Date: May 2001
Location: Pittsburgh, PA
Posts: 725
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 231 Post(s)
Liked: 103
Quote:
Originally Posted by DLCPhoto View Post
Thanks for the reply, Pip.

I have previously used a Harmony Hub/Remote, although I never found a way to add more lens memories directly.

For Control4, all I need is the actual long hex IR code that the Harmony would be emitting, and I can then manually copy/paste that code into the Control4 Program.

I'll have to see if there is a way to obtain those codes from Harmony, as that might just do the trick.

Was it only a 3rd Memory slot that using the 640 gave you, or were there more available?
I don’t remember. It was a while ago and I only have three memories set up.

Pip
Pip is offline  
post #31953 of 31987 Old 07-11-2019, 12:37 PM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by Pip View Post
I don’t remember. It was a while ago and I only have three memories set up.

Pip
I loaded the 640 into the Harmony App, and saw only the 3 Lens Memory slots.

So this wouldn't fully solve my problems, and I really need, if they're available, the full long hex codes for each of the 5 available Lens Memory slots for the RS400, since I do use them all at times.

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
Sponsored Links
Advertisement
 
post #31954 of 31987 Old 07-11-2019, 07:49 PM
AVS Forum Special Member
 
Dave Vaughn's Avatar
 
Join Date: Mar 2002
Location: Vacaville, CA
Posts: 5,940
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1430 Post(s)
Liked: 2187
Quote:
Originally Posted by DLCPhoto View Post
I loaded the 640 into the Harmony App, and saw only the 3 Lens Memory slots.

So this wouldn't fully solve my problems, and I really need, if they're available, the full long hex codes for each of the 5 available Lens Memory slots for the RS400, since I do use them all at times.
Don,

I reached out to my contact at JVC and here was his reply:

Quote:
Hi David,

Memory codes are unchanged.
I'm not sure why they aren't working. Any code I've put into my URC software has always worked, but I don't use the various lens memories (I have never had a need to). Can you try one of the other codes and see if that works?

David Vaughn Blu-ray Reviewer / Technical Writer Sound & Vision Magazine (Print & Online)

For Sale: JVC X750R Projector (RS500 Equivalent) https://www.avsforum.com/forum/252-f...l#post58241092
Dave Vaughn is offline  
post #31955 of 31987 Old 07-12-2019, 02:37 AM
AVS Forum Special Member
 
Dreamliner's Avatar
 
Join Date: Aug 2009
Location: Minnesota
Posts: 2,092
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 1374 Post(s)
Liked: 698
I still don't know how any of you are getting pixel perfect lens memory without needing to tweak it a bit each time. I've had 3 JVC projectors and none of them have been one-touch perfect except maybe 1/10 times. This is the sole reason I still have my JVC remote sitting out, to adjust the vertical shift.
Ted99 likes this.
Dreamliner is offline  
post #31956 of 31987 Old 07-12-2019, 03:24 AM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by Dave Vaughn View Post
Don,

I reached out to my contact at JVC and here was his reply:

I'm not sure why they aren't working. Any code I've put into my URC software has always worked, but I don't use the various lens memories (I have never had a need to). Can you try one of the other codes and see if that works?
Thanks for following up on this.

It is certainly possible there is user error on my part. I'm new to Control4, which is quite a bit more sophisticated, and therefore complex, than Harmony, etc. I made a similar modification to a UB-820 command, and that worked, so I think I'm doing it right, but I'll play around with it more this afternoon.

Thanks again.

Don

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
post #31957 of 31987 Old 07-12-2019, 06:13 AM
AVS Forum Addicted Member
 
Mike Garrett's Avatar
 
Join Date: Sep 2011
Posts: 25,565
Mentioned: 232 Post(s)
Tagged: 0 Thread(s)
Quoted: 11828 Post(s)
Liked: 9358
Send a message via Skype™ to Mike Garrett
Quote:
Originally Posted by Dreamliner View Post
I still don't know how any of you are getting pixel perfect lens memory without needing to tweak it a bit each time. I've had 3 JVC projectors and none of them have been one-touch perfect except maybe 1/10 times. This is the sole reason I still have my JVC remote sitting out, to adjust the vertical shift.
I have not tested the lens memory on my RS3000, but I do know that JVC has beefed up the lens supports to greatly improve the accuracy of the lens memory.
Mike Garrett is offline  
post #31958 of 31987 Old 07-12-2019, 06:25 AM
AVS Forum Special Member
 
Join Date: Dec 2014
Location: Mississauga, ON, Canada
Posts: 6,458
Mentioned: 121 Post(s)
Tagged: 0 Thread(s)
Quoted: 4507 Post(s)
Liked: 1685
Quote:
Originally Posted by DLCPhoto View Post
Just tested it out, and unfortunately, I tried the codes for both Lens Memory 3 and 4, and they didn't seem to have any effect.

That PDF shows up to 10 Lens Memory 'slots' while the RS400 (and I'm not sure what other models) only has 5. That suggests that these codes aren't necessarily going to work with this projector.
F
Has anybody successfully found and used long hex codes for Lens Memory slots other than the 1 and 2, which have dedicated buttons on the remote, in their systems?
The lens memory codes seem to be consistent between Dave Vaughn’s and Markmon1’s list.
Dominic Chan is offline  
post #31959 of 31987 Old 07-12-2019, 06:45 AM
AVS Forum Addicted Member
 
David Susilo's Avatar
 
Join Date: Aug 2002
Location: Markham, Canada
Posts: 10,199
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked: 650
Quote:
Originally Posted by Dreamliner View Post
I still don't know how any of you are getting pixel perfect lens memory without needing to tweak it a bit each time. I've had 3 JVC projectors and none of them have been one-touch perfect except maybe 1/10 times. This is the sole reason I still have my JVC remote sitting out, to adjust the vertical shift.
I’ve used the last 3 generations of JVC projector (people change bulb, I change projector) and other than the need to do lens shift once or twice a year, it’s been perfect.
nathan_h likes this.

follow my A/V tweets @davidsusilo
ISF, THX, CEDIA, Control4 & HAA certified
Reviewer for TED & WifiHifi Magazines
my (yet to be completed) BD list
my home theatre
David Susilo is offline  
post #31960 of 31987 Old 07-12-2019, 08:20 AM
Advanced Member
 
Join Date: Dec 2015
Posts: 903
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 579 Post(s)
Liked: 302
Quote:
Originally Posted by Dreamliner View Post
I know for 100% certain you can use the JAVS curves on the UB820 with a RSx00 projector. You might have inadvertently answered my question of if the JAVS curves work on the RSx40 projectors if you already have it loaded...

Just make those changes two I mentioned above and compare HDR2020+Custom Gamma vs SDR2020+Gamma 2.4 and see what you prefer.

I had so many problems with disc-to-disc brightness differences that I went straight to SDR2020. Who knows, perhaps HDR with the secret sauce of the HDR Optimizer and the "HDR TV Type>Basic Luminance LCD and Projector" setting from my guide will be enough to make it a quality alternative.

I just know that with my recommended settings in SDR2020+Gamma 2.4 I haven't had to make a single PQ adjustment since I configured it that way almost a year ago.

Dreamer unfortunately i had to return the panasonic not because it wasn't anything as you described it, as a matter of fact it was awesome but having two projectors here in the same room was a conflict for me.. My roku was going through the oppo and into the 1080p projector but having the roku go straight into the 1080 projector the image took a dump quality... When removing the oppo the projector only accepts hd.. With oppo/roku the oppo dectect's uhd and downscales it and it looks amazing... I'm glad i was able to experience the Pani but I'm going to wait till the next round and hopefully then they will have and hdmi imput for my roku... Thanks for the help
jorgebetancourt is online now  
post #31961 of 31987 Old 07-12-2019, 08:45 AM
AVS Forum Addicted Member
 
zombie10k's Avatar
 
Join Date: Dec 2007
Posts: 12,718
Mentioned: 159 Post(s)
Tagged: 1 Thread(s)
Quoted: 5238 Post(s)
Liked: 5493
Quote:
Originally Posted by jorgebetancourt View Post
Dreamer unfortunately i had to return the panasonic not because it wasn't anything as you described it, as a matter of fact it was awesome but having two projectors here in the same room was a conflict for me.. My roku was going through the oppo and into the 1080p projector but having the roku go straight into the 1080 projector the image took a dump quality... When removing the oppo the projector only accepts hd.. With oppo/roku the oppo dectect's uhd and downscales it and it looks amazing... I'm glad i was able to experience the Pani but I'm going to wait till the next round and hopefully then they will have and hdmi imput for my roku... Thanks for the help
keep an eye on the MadVR Envy thread, it sounds like they will demo it at Cedia this year in September.

https://www.avsforum.com/forum/37-vi...thread-10.html

This will be a game changer since the MadVR DTM excels over the custom curves, JVC ATM (4K models) or the UB820 and will allow you to keep the Roku->Oppo setup and provide DTM for all UHD sources.
zombie10k is offline  
post #31962 of 31987 Old 07-12-2019, 10:04 AM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by Dave Vaughn View Post
Don,

I reached out to my contact at JVC and here was his reply:

I'm not sure why they aren't working. Any code I've put into my URC software has always worked, but I don't use the various lens memories (I have never had a need to). Can you try one of the other codes and see if that works?
Quote:
Originally Posted by Dominic Chan View Post
The lens memory codes seem to be consistent between Dave Vaughn’s and Markmon1’s list.
I appreciate both of you here, as well as @markmon1 who posted a simple way to get long hex codes, in the RS3000/RS2000RS1000 thread. Here's what I've discovered, using the code for Lens Memory 1 as an example:

Here is the code that I copied directly out of the Control4 Interface, again for Lens Memory 1, which I have confirmed works properly:

Quote:
0000 006c 0000 0023 013f 00a0 0014 003c 0014 003b 0014 0014 0014 0014 0014 003c 0014 003c 0014 003c 0014 0014 0014 0014 0014 0014 0014 0014 0014 003c 0014 003c 0014 0014 0014 003c 0014 003c 0014 02e1 0014 003c 0014 003c 0014 0014 0014 0014 0014 003c 0014 003c 0014 003c 0014 0014 0014 0014 0014 0014 0014 0014 0014 003c 0014 003c 0014 0014 0014 003c 0014 003c 0014 02e1
Here is the code for that same Lens Memory 1, which is the same for both markmon's generator, and the JVC PDF which has been mentioned:

Quote:
0000 006D 0001 0011 0141 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6
The code that is working obviously has many more numbers in it (74 groups of 4, vs 40 groups of 4, if I counted right).

This suggests some type of format difference? If so, how does one translate from one to the other? Anything else that would account for this difference?

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
post #31963 of 31987 Old 07-12-2019, 01:33 PM
Advanced Member
 
Join Date: Dec 2015
Posts: 903
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 579 Post(s)
Liked: 302
Quote:
Originally Posted by zombie10k View Post
keep an eye on the MadVR Envy thread, it sounds like they will demo it at Cedia this year in September.

https://www.avsforum.com/forum/37-vi...thread-10.html

This will be a game changer since the MadVR DTM excels over the custom curves, JVC ATM (4K models) or the UB820 and will allow you to keep the Roku->Oppo setup and provide DTM for all UHD sources.
For sure. Cant wait1111

Sent from my SM-G930T using Tapatalk
jorgebetancourt is online now  
post #31964 of 31987 Old 07-12-2019, 02:19 PM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,522
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 4657 Post(s)
Liked: 2951
Quote:
Originally Posted by DLCPhoto View Post
I appreciate both of you here, as well as @markmon1 who posted a simple way to get long hex codes, in the RS3000/RS2000RS1000 thread. Here's what I've discovered, using the code for Lens Memory 1 as an example:

Here is the code that I copied directly out of the Control4 Interface, again for Lens Memory 1, which I have confirmed works properly:



Here is the code for that same Lens Memory 1, which is the same for both markmon's generator, and the JVC PDF which has been mentioned:



The code that is working obviously has many more numbers in it (74 groups of 4, vs 40 groups of 4, if I counted right).

This suggests some type of format difference? If so, how does one translate from one to the other? Anything else that would account for this difference?
It looks to me like the control4 code is being sent twice which is like if you hold the remote button longer. It seems to have a header like 0000 006D 0001 0011 0141 00A0 then the part from there to the end is duplicated. I know my uutx on pc has an option to repeat 1-n times. My guess is that’s what it does when you use that. The control 4 code looks like a repeat 2.

0000 006D 0001 0011 0141 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6

Looks like perhaps the equivalent. I can modify the web tool to allow for showing repeat codes.
Dave Vaughn and DLCPhoto like this.
markmon1 is offline  
post #31965 of 31987 Old 07-12-2019, 03:00 PM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by markmon1 View Post
It looks to me like the control4 code is being sent twice which is like if you hold the remote button longer. It seems to have a header like 0000 006D 0001 0011 0141 00A0 then the part from there to the end is duplicated. I know my uutx on pc has an option to repeat 1-n times. My guess is that’s what it does when you use that. The control 4 code looks like a repeat 2.

0000 006D 0001 0011 0141 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6

Looks like perhaps the equivalent. I can modify the web tool to allow for showing repeat codes.
Thanks.

The Control4 software does have an option for a repeat. I think I may have tried that once, and it didn't work, but I'm not 100% sure how thorough I was.

When I saw the difference in code size/length, the repeat concept occurred to me, but I would have expected one code to be twice the size of the other. I guess it's not that simple?

Let us know when you've made the modification, and I'll give it a try! I guess one way to know before-hand, is if it spits out the code for Memory 1 that my post showed is being used by Control4.

Appreciate your efforts here!

ETA: I re-read your post, where you stated a 'header' that is 6 groups of 4 in size. The 74 - 6 is 68, and the 40 - 6 is 34, so that would be double. Is the 'header' the same for each code, or will it also vary?

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
post #31966 of 31987 Old 07-12-2019, 03:07 PM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,522
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 4657 Post(s)
Liked: 2951
Quote:
Originally Posted by DLCPhoto View Post
Thanks.

The Control4 software does have an option for a repeat. I think I may have tried that once, and it didn't work, but I'm not 100% sure how thorough I was.

When I saw the difference in code size/length, the repeat concept occurred to me, but I would have expected one code to be twice the size of the other. I guess it's not that simple?

Let us know when you've made the modification, and I'll give it a try! I guess one way to know before-hand, is if it spits out the code for Memory 1 that my post showed is being used by Control4.

Appreciate your efforts here!

ETA: I re-read your post, where you stated a 'header' that is 6 groups of 4 in size. The 74 - 6 is 68, and the 40 - 6 is 34, so that would be double. Is the 'header' the same for each code, or will it also vary?
Well plug in this for lens1 and see if it works
0000 006D 0001 0011 0141 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6

Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.
markmon1 is offline  
post #31967 of 31987 Old 07-12-2019, 03:22 PM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by markmon1 View Post
Well plug in this for lens1 and see if it works
0000 006D 0001 0011 0141 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6
I tried it, but no joy. No response.

Shouldn't it be exactly the same as the sequence I copied from Control4?

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
post #31968 of 31987 Old 07-12-2019, 03:47 PM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,522
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 4657 Post(s)
Liked: 2951
Quote:
Originally Posted by DLCPhoto View Post
I tried it, but no joy. No response.

Shouldn't it be exactly the same as the sequence I copied from Control4?
Well we are assuming control 4 uses pronto codes since they look so similar. But the codes coming from the tool here match JVC's spec and also work when I test using UUTX. I added the repeat option to the tool.

Also this all assumes you're on remote control code A. If you're on remote control B, you should use jvcprojectorcodeb instead.

Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.
markmon1 is offline  
post #31969 of 31987 Old 07-12-2019, 04:00 PM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by markmon1 View Post
Well we are assuming control 4 uses pronto codes since they look so similar. But the codes coming from the tool here match JVC's spec and also work when I test using UUTX. I added the repeat option to the tool.

Also this all assumes you're on remote control code A. If you're on remote control B, you should use jvcprojectorcodeb instead.
Yes, I just confirmed Remote Code A.

This also may or may not be relevant: the only IR interface Control4 Driver for JVC was the DLA-RS1, so that's the one in use. There is a serial driver for the RS400, but it would be difficult to run another cable up there.

If you're out of ideas, I guess the next step would be for me to contact Control4 support, and see if they can clarify anything here.

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
post #31970 of 31987 Old 07-12-2019, 04:05 PM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,522
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 4657 Post(s)
Liked: 2951
Quote:
Originally Posted by DLCPhoto View Post
Yes, I just confirmed Remote Code A.

This also may or may not be relevant: the only IR interface Control4 Driver for JVC was the DLA-RS1, so that's the one in use. There is a serial driver for the RS400, but it would be difficult to run another cable up there.

If you're out of ideas, I guess the next step would be for me to contact Control4 support, and see if they can clarify anything here.
The remote codes haven't changed since the RS1. Is your projector attached to the network? Control 4 can also send network IP commands and I think I've helped someone add those in the past so it should be more straight forward. It seems control 4 may add some sort of "room mask' to their codes. There's not any info on it that I can dig up.

You could contact control 4 and ask how you enter a pronto code into their JVC driver. I'm sure they'll tell you to contact your installer. Control 4 is not end-user friendly.

Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.
markmon1 is offline  
post #31971 of 31987 Old 07-12-2019, 04:18 PM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by markmon1 View Post
The remote codes haven't changed since the RS1. Is your projector attached to the network? Control 4 can also send network IP commands and I think I've helped someone add those in the past so it should be more straight forward. It seems control 4 may add some sort of "room mask' to their codes. There's not any info on it that I can dig up.

You could contact control 4 and ask how you enter a pronto code into their JVC driver. I'm sure they'll tell you to contact your installer. Control 4 is not end-user friendly.
No network connection up there, unfortunately.

I'm in a unique position here, with respect to Control4. After retiring from my medical practice a year ago, I was getting bored, and actually found a job with one of the largest Audio Video Integrators in NC/SC. We're trying to establish a market here in my area, and we're setting up my home as a quasi-showroom for potential customers.

So I can approach them both as the end-user, as well as the Installer. I've completed the Associates Certification for Control4 (not a big deal, though), and may go all the way to the full Automation specialist, as I think that could be enjoyable.

I'll post back if/when I learn what's going on here.

It's still the unchanged JVC that has to respond to the IR codes, whatever the source, so you'd think this would be straight-forward. Guess I'll find out!

Thanks again for your efforts!
Dave Vaughn likes this.

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
post #31972 of 31987 Old 07-12-2019, 04:19 PM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,522
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 4657 Post(s)
Liked: 2951
Quote:
Originally Posted by DLCPhoto View Post
No network connection up there, unfortunately.

I'm in a unique position here, with respect to Control4. After retiring from my medical practice a year ago, I was getting bored, and actually found a job with one of the largest Audio Video Integrators in NC/SC. We're trying to establish a market here in my area, and we're setting up my home as a quasi-showroom for potential customers.

So I can approach them both as the end-user, as well as the Installer. I've completed the Associates Certification for Control4 (not a big deal, though), and may go all the way to the full Automation specialist, as I think that could be enjoyable.

I'll post back if/when I learn what's going on here.

It's still the unchanged JVC that has to respond to the IR codes, whatever the source, so you'd think this would be straight-forward. Guess I'll find out!

Thanks again for your efforts!
I think the code getting sent by the control 4 is going to match the code getting sent by the pronto code into say harmony software. But the code you input into control 4 to get to that spot is not the raw pronto code. What other functions are in that JVC driver? Do any of those match any of the codes output by the tool for the same function?

Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.
markmon1 is offline  
post #31973 of 31987 Old 07-12-2019, 04:25 PM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,522
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 4657 Post(s)
Liked: 2951
Quote:
Originally Posted by DLCPhoto View Post
No network connection up there, unfortunately.

I'm in a unique position here, with respect to Control4. After retiring from my medical practice a year ago, I was getting bored, and actually found a job with one of the largest Audio Video Integrators in NC/SC. We're trying to establish a market here in my area, and we're setting up my home as a quasi-showroom for potential customers.

So I can approach them both as the end-user, as well as the Installer. I've completed the Associates Certification for Control4 (not a big deal, though), and may go all the way to the full Automation specialist, as I think that could be enjoyable.

I'll post back if/when I learn what's going on here.

It's still the unchanged JVC that has to respond to the IR codes, whatever the source, so you'd think this would be straight-forward. Guess I'll find out!

Thanks again for your efforts!
Curious, but does this code do anything?
0000 006c 0000 0023 013f 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6

Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.
markmon1 is offline  
post #31974 of 31987 Old 07-12-2019, 04:27 PM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by markmon1 View Post
Curious, but does this code do anything?
0000 006c 0000 0023 013f 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6
Cant check right now, but will let you know later on this evening.

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
post #31975 of 31987 Old 07-12-2019, 06:33 PM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by markmon1 View Post
Curious, but does this code do anything?
0000 006c 0000 0023 013f 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6
That definitely got a response.

It looks like it triggers Lens Memory 1, even though it is different from the Code in Control4 that also seems to trigger the same.

How did you generate this, what did you think it would do, and what does this mean? Sounds like this could be promising!

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
post #31976 of 31987 Old 07-12-2019, 06:40 PM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,522
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 4657 Post(s)
Liked: 2951
Quote:
Originally Posted by DLCPhoto View Post
That definitely got a response.

It looks like it triggers Lens Memory 1, even though it is different from the Code in Control4 that also seems to trigger the same.

How did you generate this, what did you think it would do, and what does this mean? Sounds like this could be promising!
Yea so what I did is took the repeated code off the site generator and replaced the first 6 nibbles (which are some sort of device based codes). Perhaps your control 4 uses these to route the request then replaces these when it actually sends. To use my method for control 4, simply generate codes off my site, grab the repeated 1 time code, and replace the first 6 nibbles

Replace:
0000 006D 0001 0011 0141 00A0

With:
0000 006c 0000 0023 013f 00A0

Then copy the new string into your control 4. It's possible you don't even need the repeated code. So just this might work:
0000 006c 0000 0023 013f 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6
DLCPhoto likes this.

Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.
markmon1 is offline  
post #31977 of 31987 Old 07-12-2019, 06:54 PM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by markmon1 View Post
Yea so what I did is took the repeated code off the site generator and replaced the first 6 nibbles (which are some sort of device based codes). Perhaps your control 4 uses these to route the request then replaces these when it actually sends. To use my method for control 4, simply generate codes off my site, grab the repeated 1 time code, and replace the first 6 nibbles

Replace:
0000 006D 0001 0011 0141 00A0

With:
0000 006c 0000 0023 013f 00A0

Then copy the new string into your control 4. It's possible you don't even need the repeated code. So just this might work:
0000 006c 0000 0023 013f 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 02E6
You are a frikkin' genius with this stuff!!

I just generated fresh codes for Lens Memory 3 through 5, replaced the first 6 'nibbles' with your string, assigned them to the Number 3 through 5 buttons on my Remote, and they worked perfectly!

This is simply amazing, and I can't thank you enough.

I have seen these questions arise periodically on various threads, so hopefully your discovery and tools will be of help to others.

Wow.
Dave Vaughn and markmon1 like this.

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000

Last edited by DLCPhoto; 07-12-2019 at 07:28 PM.
DLCPhoto is online now  
post #31978 of 31987 Old 07-12-2019, 07:17 PM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,522
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 4657 Post(s)
Liked: 2951
Quote:
Originally Posted by DLCPhoto View Post
You are a frikkin' genius with this stuff!!

I just generated fresh codes for Lens Memory 3 through 5, replaced the first 6 'nibbles' with you string, assigned them to the Number 3 through 5 buttons on my Remote, and they worked perfectly!

This is simply amazing, and I can't thank you enough.

I have seen these questions arise periodically on various threads, so hopefully your discovery and tools will be of help to others.

Wow.
So I'm glad it's working for you. I wish I knew more about control 4 and a way to properly advise control 4 users on how to use my web tool. Do you still need the repeat 1x codes? Or do the shorter ones work using the replace method? I added a little note on the webpage for it at least.

Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.

Last edited by markmon1; 07-12-2019 at 07:21 PM.
markmon1 is offline  
post #31979 of 31987 Old 07-12-2019, 07:28 PM
AVS Forum Special Member
 
DLCPhoto's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,355
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1560 Post(s)
Liked: 693
Quote:
Originally Posted by markmon1 View Post
So I'm glad it's working for you. I wish I knew more about control 4 and a way to properly advise control 4 users on how to use my web tool. Do you still need the repeat 1x codes? Or do the shorter ones work using the replace method?
I used the one marked "Code: 0xDA repeated once".

For the Codes/Functions we've examined, the process as recommended in your 9:40 pm post, was comprehensive. Just plug in the appropriate 2 character code from your other page, copy/paste the 'repeated once' code, replace the first 6 'nibbles' (is that your term, or is that what they're really called?) with the string you provided, paste the resulting string into the appropriate place in the Driver, and you're good to go!

Whether this would extend to all the other JVC Commands hasn't been demonstrated, although I'd guess they would all work fine. And I have no idea if this would also work for other brand Projectors.

So we've installed Control4 light switches, door locks, thermostats, surveillance cameras, and integrated all our AV gear, using Control4 as the "universal remote." As I'm learning how it works, and how powerful it is, I am more and more impressed.

I've successfully used a Harmony Hub/Remote before, and with some effort, was able to get this working quite well. But Control4 is like Harmony on steroids!

I also added the Control4 Skill to my Amazon Echo Dot yesterday, and can very simply control what is a very complex integrated system under the hood, with straightforward voice commands. Gives me the best of both worlds!

JVC RS400, Marantz SR7010, Screen Innovations 160" 2.35:1 Screen
Front L/R: Duntech Sovereigns, powered by 2 bridged Adcom GFA-555
Center: Revel C208 powered by Cambridge Audio Azur 851W
Dolby Bed (4): Sony Core SS-CS5, Atmos (4): Ascend Acoustics CBM-170 SE
Subwoofer: DIY 8' sub with 4 18" SI Drivers, powered by iNuke 6000
DLCPhoto is online now  
post #31980 of 31987 Old 07-16-2019, 03:39 PM
AVS Forum Special Member
 
dragonbud0's Avatar
 
Join Date: Nov 2001
Location: Jersey Shore
Posts: 2,399
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 203 Post(s)
Liked: 106
Quote:
Originally Posted by zombie10k View Post
Direct connection with Windows 10 PC - single ethernet cable from laptop plugged directly into the JVC


lower right hand corner, right click the network icon






Click 'Open Network & Internet settings'




left hand side, Click on 'Ethernet' - right hand side, click 'Change Adapter Options'




Right click on the Ethernet connection and click 'properties'




Double click on 'Internet Protocol Version 4', set the IP info in the following screenshot - click 'ok', and 'ok' again on previous screen.





On the JVC, set the following IP address:




In the JVC Autocal software, set the following IP address and click 'Check' to verify the connection is ok.



last step, upload curves and watch HDR content.
Zombie,
For background info, I bought a used RS500 from a member who had the pj calibrated. Color profile BT.2020 was on the drop down already. When I was playing 4k from Amazon, none of the gamma setting worked to my taste. I followed your procedure to import some of the gamma setting from Javs (.jgd files). My Wintel laptop is connected to the pj directly, using your detailed picture steps. Everything worked fine until I tried to upload (Import) my gamma .jgd from my folder. Attached is the error message. Essentially I cannot enter anything in the Gamma field. Just puzzled. Do I need to import other settings, such as curves, config and/or curves, prior to Gamma? TIA.

Also, I noticed that the caption "Control4" displayed at the lower portion of my Network menu, assuming that was from the calibrator.
Attached Thumbnails
Click image for larger version

Name:	Screenshot 2019-07-16 at 6.34.44 PM.png
Views:	13
Size:	1.06 MB
ID:	2591554  
dragonbud0 is offline  
Sponsored Links
Advertisement
 
Reply Digital Hi-End Projectors - $3,000+ USD MSRP

Tags
jvc-rs500u synch/display issue? , RS600

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off