Official JVC RS3000/NX9 - JVC RS2000/NX7/N7 - JVC RS1000/NX5/N5 - Owners Thread - Page 426 - AVS Forum | Home Theater Discussions And Reviews
Forum Jump: 
 13938Likes
Reply
 
Thread Tools
post #12751 of 14938 Old 06-14-2019, 09:29 AM
AVS Forum Addicted Member
 
Craig Peer's Avatar
 
Join Date: Aug 2003
Location: Sacramento, CA
Posts: 15,913
Mentioned: 110 Post(s)
Tagged: 0 Thread(s)
Quoted: 6705 Post(s)
Liked: 7829
Quote:
Originally Posted by Yoxxy View Post
I had my RS2000 calibrated by Craig Rounds and also installed a Lumagen. It's hard to differentiate the advantages of the calibration vs. the advantages of the Lumagen's DTM but the overall pictures, especially in HDR is demonstratively better. Craig was actually able to leave the DCI filter on as there was plenty of light in HDR with the DTM enabled on the Lumagen. I think for this generation the best cost benefit is the RS2000 with the Lumagen as opposed to the RS3000. I think it also helps to future proof whatever the next generation is.

I would consider myself to be more of a noob than many people on here and Craig sends down the after-calibration reports showing exactly how much . What I would say is that both my wife and I noticed the difference in quality. I'd definitely look at a potential calibration if you're not fully satisfied with the HDR picture.
With the Lumagen I'll bet the 4K picture is amazing.
Craig Peer is offline  
Sponsored Links
Advertisement
 
post #12752 of 14938 Old 06-14-2019, 10:50 AM
Member
 
Yoxxy's Avatar
 
Join Date: Nov 2005
Posts: 47
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 37
Quote:
Originally Posted by Craig Peer View Post
With the Lumagen I'll bet the 4K picture is amazing.
Definitely and there's a very noticeable increase in clarity of 1080p that is upscaled off the lumagen as opposed to the JVC. I thought the JVC was doing a good job at upconverting, having seen it now I would disagree.
Craig Peer likes this.

Last edited by Yoxxy; 06-14-2019 at 11:15 AM.
Yoxxy is offline  
post #12753 of 14938 Old 06-14-2019, 11:14 AM
AVS Forum Special Member
 
docrog's Avatar
 
Join Date: Sep 2001
Location: Okatie, SC
Posts: 1,319
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1079 Post(s)
Liked: 366
Quote:
Originally Posted by Yoxxy View Post
Definitely and there's a very noticeable increase in quality of 1080p that is upscaled off the lumagen as opposed to the JVC. I thought the JVC was doing a good job at upconverting, having seen it now I would disagree.
The consensus on this thread, for quite a long time, has been that most quality players (both UHD & HD) did a better job of upscaling legacy material to 4K than the JVC, so it's little wonder that the Lumagen also bested the JVC in that capacity.

JVC NX7, Yamaha RX-A3080 (7.2.4 speaker layouts: Dolby Atmos & DTS:X), Panasonic UB820, Oppo 103D, ATV4K, Roku Ultra, TiVo Bolt Vox, Vandersteen Model 3 Signatures & VCC-1 Signature, SVS SB-2000 (2), Clark Synthesis Tactile Bass Transducers (2), Polk PSW-12
docrog is offline  
Sponsored Links
Advertisement
 
post #12754 of 14938 Old 06-14-2019, 12:48 PM
AVS Forum Special Member
 
BrandonJF's Avatar
 
Join Date: Mar 2006
Posts: 1,166
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 53 Post(s)
Liked: 21
Quote:
Originally Posted by jmonier View Post
2.04 did NOT introduce the blue line problem. It has been there since 1.20.

The problem has both hardware AND firmware components. My original projector has the problem with everything from 1.20 through 2.06 and 2.07. The replacement is good on 2.06 and 2.07.
Has this been confirmed somewhere that there was a hardware factor to these issues? I am not sure how anyone is able to say anything is "good" on 2.06 and 2.07 at this point given how recently those revision were made available. I have put way more hours on this projector on previous firmware than I have on 2.07. My not running into an issue with 1/100th of the usage on the new firmware is way too soon for me to declare the problem has been solved. It took a LONG time before I originally ran into an issue. Any other time I've ran into an issue, it's been pretty distant between occurrences.
Th601 likes this.
BrandonJF is offline  
post #12755 of 14938 Old 06-14-2019, 01:09 PM
Senior Member
 
riddle's Avatar
 
Join Date: Sep 2011
Posts: 255
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 122 Post(s)
Liked: 55
I still hope on MadVR ENVY who can be some solution and for bether price than Lumagen PRO
Spizz, Tom Bley and Dandlj like this.
riddle is offline  
post #12756 of 14938 Old 06-14-2019, 01:38 PM
Senior Member
 
avsBuddy's Avatar
 
Join Date: Feb 2008
Posts: 201
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked: 73
Quote:
Originally Posted by docrog View Post
The consensus on this thread, for quite a long time, has been that most quality players (both UHD & HD) did a better job of upscaling legacy material to 4K than the JVC, so it's little wonder that the Lumagen also bested the JVC in that capacity.
Quote:
Originally Posted by Yoxxy View Post
Definitely and there's a very noticeable increase in clarity of 1080p that is upscaled off the lumagen as opposed to the JVC. I thought the JVC was doing a good job at upconverting, having seen it now I would disagree.
That's what I've read in professional reviews as well, that JVC 4K up-scaling is shockingly sub-par. That's unfortunate. For that price we shouldn't be needing any external processing tools to make legacy formats look good. I'm planning on my AV processor to do the heavy lifting for JVC.
avsBuddy is offline  
post #12757 of 14938 Old 06-14-2019, 02:40 PM
AVS Forum Special Member
 
docrog's Avatar
 
Join Date: Sep 2001
Location: Okatie, SC
Posts: 1,319
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1079 Post(s)
Liked: 366
Quote:
Originally Posted by avsBuddy View Post
That's what I've read in professional reviews as well, that JVC 4K up-scaling is shockingly sub-par. That's unfortunate. For that price we shouldn't be needing any external processing tools to make legacy formats look good. I'm planning on my AV processor to do the heavy lifting for JVC.
With the exception of playback of 3D content, I use the Oppo 103D to upscale legacy content to 4K, even better than my UB820. Images, especially 1080p content, are flat out gorgeous on my NX7.

JVC NX7, Yamaha RX-A3080 (7.2.4 speaker layouts: Dolby Atmos & DTS:X), Panasonic UB820, Oppo 103D, ATV4K, Roku Ultra, TiVo Bolt Vox, Vandersteen Model 3 Signatures & VCC-1 Signature, SVS SB-2000 (2), Clark Synthesis Tactile Bass Transducers (2), Polk PSW-12
docrog is offline  
post #12758 of 14938 Old 06-14-2019, 04:25 PM
Advanced Member
 
jmonier's Avatar
 
Join Date: Jan 2003
Location: Torrance, CA
Posts: 903
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 197 Post(s)
Liked: 113
Quote:
Originally Posted by BrandonJF View Post
Has this been confirmed somewhere that there was a hardware factor to these issues? I am not sure how anyone is able to say anything is "good" on 2.06 and 2.07 at this point given how recently those revision were made available. I have put way more hours on this projector on previous firmware than I have on 2.07. My not running into an issue with 1/100th of the usage on the new firmware is way too soon for me to declare the problem has been solved. It took a LONG time before I originally ran into an issue. Any other time I've ran into an issue, it's been pretty distant between occurrences.
I've stated several places before this that I have a test clip with which I can cause the problem at will. I've run this test clip on two projectors that have the same firmware and one has the problem and one doesn't. That confirms that there is a hardware factor.

(If you want the test clip, send me a PM with your email address)
jmonier is offline  
post #12759 of 14938 Old 06-14-2019, 04:28 PM
Advanced Member
 
gravi's Avatar
 
Join Date: Feb 2007
Posts: 542
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 357 Post(s)
Liked: 184
Quote:
Originally Posted by Yoxxy View Post
Definitely and there's a very noticeable increase in clarity of 1080p that is upscaled off the lumagen as opposed to the JVC. I thought the JVC was doing a good job at upconverting, having seen it now I would disagree.
Does the Lumagen do dynamic (frame by frame) tone mapping?
gravi is offline  
post #12760 of 14938 Old 06-14-2019, 04:37 PM
AVS Forum Special Member
 
Join Date: Oct 2002
Posts: 1,640
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked: 570
Quote:
Originally Posted by gravi View Post
Does the Lumagen do dynamic (frame by frame) tone mapping?


Yes.
Craig Peer likes this.

Lind Family HT
HT - RS2000 - ST130 - Emotiva RMC-1 - XPA-7 - XPA-5 - GE Triton 2 - GE Supercenter XXL - GE Invisa 650 x 8 - Xbox One X - PS4 Pro - Oppo BDP-203 - Kalediscape Strato - HTPC 1008ti- Dual SVS PB16-Ultra's - Lumagen Radiance Pro
kaotikr1 is online now  
post #12761 of 14938 Old 06-14-2019, 05:43 PM
Member
 
Yoxxy's Avatar
 
Join Date: Nov 2005
Posts: 47
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked: 37
Quote:
Originally Posted by gravi View Post
Does the Lumagen do dynamic (frame by frame) tone mapping?
Yes supposedly it is on par with Madvr, the advantage being that the Lumagen also controls a lot of the gamma curve for the projector as well. Overall, I'm really impressed with the Lumagen/RS2000 combo.
Craig Peer likes this.
Yoxxy is offline  
post #12762 of 14938 Old 06-14-2019, 07:15 PM
AVS Forum Addicted Member
Industry Insider
 
Cleveland Plasma's Avatar
 
Join Date: Jun 2005
Location: Cleveland, Ohio
Posts: 24,192
Mentioned: 80 Post(s)
Tagged: 1 Thread(s)
Quoted: 6498 Post(s)
Liked: 6476
Quote:
Originally Posted by hjones View Post
But then I see the incredible picture the RS3000 puts up and I tend to forgive JVC for all the issues
Meters and the numbers produced do not lie One of the best units ever made. Not to mention every projector has issues.

Quote:
Originally Posted by surroundsound99 View Post
Good news! Free lamp was approved! Thank you JVC. As I posted before, my NX7 came in damaged, probably by a forklift driver. Therefore I missed out on the free lamp promo that ended April 30th. But all it took was just one phone call and one e-mail and now I'm all set. All's well that ends well.
Yep, not your fault the units where late to begin with neither where the damages.
Cleveland Plasma is offline  
post #12763 of 14938 Old 06-14-2019, 09:52 PM
Member
 
bathes2051's Avatar
 
Join Date: Apr 2007
Posts: 138
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 56 Post(s)
Liked: 30
Quote:
Originally Posted by Cleveland Plasma View Post
Not to mention every projector has issues.
What about professional projectors? The last time I remember having a theater projection interrupted for technical issues, they were still using film.
Someone said that the JVC panels are 4096px wide instead of 3840 only because those are the same panels used in their commercial products.
Do these have the same issues? If not, that reminds me of the George Carlin joke: if the black box is indestructible, why don’t they make the whole plane in the same material?
(We need an actual tongue-in-cheek emoji)

BTW, I haven’t hit the blue vertical lines issue, only the full-blown vertical lines, when I turned on CMD.
It turns out that the jerkiness in the Matrix scene I mentioned is baked into the material.
Since then, I’ve been happily running with CMD off.
bathes2051 is offline  
post #12764 of 14938 Old 06-15-2019, 12:17 AM
Advanced Member
 
locutus2k's Avatar
 
Join Date: Dec 2001
Location: Rome, Italy
Posts: 890
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 242 Post(s)
Liked: 82
Quote:
Originally Posted by surroundsound99 View Post
What am I doing wrong? I can't get Auto Tone Mapping to engage on Star Trek: Beyond, Dunkirk, and Oceans as you can see from the photos. But X-Men: Apocalypse worked fine. Those are the only titles I've tried so far. Here on Oceans, the Info window clearly shows 1054/403 nits and HDR, but the Gamma window in the other photo shows ---/--- nits, and the Auto Tone Mapping selectors are not there. Thanks everyone for helping a newbie. Panasonic UB9000 -> 1m Audioquest Coffee -> Arcam AVR850 -> Inneo Real4K adapaters on 50' fiber -> the NX7.
I suppose that you can't get Auto Tone Mapping if the source is not sending correct metadata to auto tone map. What i can tell for sure is that Star Trek: Beyond is one of those "no metadata" titles. Don't know about the others (i have local edition with different authoring). The X-Men title is sending metadata in the stream so the function is available. Also: with Panasonic players enabling own Pana tone mapping force the player to send different metadata than the source (usually in the 500nits max) that you can use along with the vpr tone mapping or not (if using the pana profiles instead of the Jvc hdr gamma).

Last edited by locutus2k; 06-15-2019 at 12:20 AM.
locutus2k is offline  
post #12765 of 14938 Old 06-15-2019, 01:20 AM
Member
 
Join Date: Dec 2014
Posts: 177
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked: 36
Does the Lumagen tonemap the image if there is no metadata available ?
abinav555 is offline  
post #12766 of 14938 Old 06-15-2019, 02:17 AM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,696
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 4793 Post(s)
Liked: 3070
Quote:
Originally Posted by abinav555 View Post
Does the Lumagen tonemap the image if there is no metadata available ?
Yes it has dynamic tone mapping and doesn't rely on or care about the meta data. It does its own frame by frame measurement in a dolby vision like manner. I'm not sure its quite as good as madVR but its supposedly quite good.

Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.
markmon1 is offline  
post #12767 of 14938 Old 06-15-2019, 04:25 AM
AVS Forum Special Member
 
docrog's Avatar
 
Join Date: Sep 2001
Location: Okatie, SC
Posts: 1,319
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1079 Post(s)
Liked: 366
Quote:
Originally Posted by Yoxxy View Post
Yes supposedly it is on par with Madvr, the advantage being that the Lumagen also controls a lot of the gamma curve for the projector as well. Overall, I'm really impressed with the Lumagen/RS2000 combo.
Which Lumagen product are you referring to? Thanks!

JVC NX7, Yamaha RX-A3080 (7.2.4 speaker layouts: Dolby Atmos & DTS:X), Panasonic UB820, Oppo 103D, ATV4K, Roku Ultra, TiVo Bolt Vox, Vandersteen Model 3 Signatures & VCC-1 Signature, SVS SB-2000 (2), Clark Synthesis Tactile Bass Transducers (2), Polk PSW-12
docrog is offline  
post #12768 of 14938 Old 06-15-2019, 05:26 AM
Senior Member
 
Join Date: Apr 2015
Posts: 210
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 167 Post(s)
Liked: 95
Quote:
Originally Posted by avsBuddy View Post
That's what I've read in professional reviews as well, that JVC 4K up-scaling is shockingly sub-par. That's unfortunate. For that price we shouldn't be needing any external processing tools to make legacy formats look good. I'm planning on my AV processor to do the heavy lifting for JVC.


I read that AVR upscaling is very basic too, because the AVR manufactures focus their dollars/r&d on sound.

Looking forward to the envy


Sent from my iPhone using Tapatalk
Dandlj is online now  
post #12769 of 14938 Old 06-15-2019, 06:20 AM
Member
 
Join Date: Feb 2019
Posts: 44
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked: 2
Quote:
Originally Posted by jmonier View Post
I've stated several places before this that I have a test clip with which I can cause the problem at will. I've run this test clip on two projectors that have the same firmware and one has the problem and one doesn't. That confirms that there is a hardware factor.

(If you want the test clip, send me a PM with your email address)
Hi I’m a total noob with all this stuff. Getting an nx7 this coming Friday—-very excited. Would love to have jmonier torture clip to test my unit—- tried to pm him but I don’t have 15 posts logged so couldn’t. Is there any other way I could get the clip jmonier? Sorry if this is an inappropriate post—- like I said I’m a noob with this stuff. Thanks
Ikemi is offline  
post #12770 of 14938 Old 06-15-2019, 06:30 AM
Advanced Member
 
jmonier's Avatar
 
Join Date: Jan 2003
Location: Torrance, CA
Posts: 903
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 197 Post(s)
Liked: 113
Quote:
Originally Posted by Ikemi View Post
Hi I’m a total noob with all this stuff. Getting an nx7 this coming Friday—-very excited. Would love to have jmonier torture clip to test my unit—- tried to pm him but I don’t have 15 posts logged so couldn’t. Is there any other way I could get the clip jmonier? Sorry if this is an inappropriate post—- like I said I’m a noob with this stuff. Thanks
I'm not sure if you understand that this clip only addresses one very specific problem - vertical lines. It is NOT a general "torture" test for the projector.

Based on my experience and that of others that I've seen here recently, the vertical lines problem is fixed on current production, so you don't need to worry about that. (And you'll get 15 posts soon enough.)
jmonier is offline  
post #12771 of 14938 Old 06-15-2019, 06:36 AM
AVS Forum Special Member
 
markmon1's Avatar
 
Join Date: Dec 2006
Posts: 5,696
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 4793 Post(s)
Liked: 3070
Quote:
Originally Posted by jmonier View Post
Based on my experience and that of others that I've seen here recently, the vertical lines problem is fixed on current production, so you don't need to worry about that.
If true, this would be great, but what evidence do you have to support this? Newer units haven't had the hours put on them yet to exhibit the vertical lines problem. So we just don't know "yet". And, as far as I know, JVC hasn't made any statement regarding them root causing or solving this problem. So how can you say this is simply solved on newer units? I don't think anything has changed. Regarding your video clip, has even one other member confirmed that it triggered the blue bars on his projector? It might have only caused them on your old projector and the trigger might be different on others.

Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.
markmon1 is offline  
post #12772 of 14938 Old 06-15-2019, 07:02 AM
AVS Forum Addicted Member
 
Craig Peer's Avatar
 
Join Date: Aug 2003
Location: Sacramento, CA
Posts: 15,913
Mentioned: 110 Post(s)
Tagged: 0 Thread(s)
Quoted: 6705 Post(s)
Liked: 7829
Quote:
Originally Posted by docrog View Post
Which Lumagen product are you referring to? Thanks!


The Radiance Pro is the current Lumagen model to get.


Sent from my iPhone using Tapatalk
Craig Peer is offline  
post #12773 of 14938 Old 06-15-2019, 07:32 AM
Member
 
Join Date: Dec 2014
Posts: 177
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked: 36
Kodi. NX7. V2.01. First time.
Attached Thumbnails
Click image for larger version

Name:	01E74A26-1EC2-4D70-BDF7-58B25DFE213B_1560609128344.jpg
Views:	57
Size:	157.6 KB
ID:	2580280  
abinav555 is offline  
post #12774 of 14938 Old 06-15-2019, 07:58 AM
Advanced Member
 
jmonier's Avatar
 
Join Date: Jan 2003
Location: Torrance, CA
Posts: 903
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 197 Post(s)
Liked: 113
Quote:
Originally Posted by markmon1 View Post
If true, this would be great, but what evidence do you have to support this? Newer units haven't had the hours put on them yet to exhibit the vertical lines problem. So we just don't know "yet". And, as far as I know, JVC hasn't made any statement regarding them root causing or solving this problem. So how can you say this is simply solved on newer units? I don't think anything has changed. Regarding your video clip, has even one other member confirmed that it triggered the blue bars on his projector? It might have only caused them on your old projector and the trigger might be different on others.
You don't even own one of these projectors so all you're going on is what you read. Quite a bit of that is confusing and more than just a little is plain wrong. I have over 500 projector hours of personal experience with it. I have done a lot of testing to track down the specifics of the problem and I do understand very well the conditions that cause it. These are actually fairly specific although they may occur infrequently. The test clip conforms to those conditions.

It is completely ridiculous to say the "trigger" might be different and that might cause the problem where the known condition never causes it. If it's THAT different, then it's a different problem. I have over 60 years of experience dealing with electronics and it's problems so I know what I'm talking about.

You've said in the past that it would need 300 hrs to prove it is fixed. While the posts here can be somewhat confusing, I've seen nothing that would support that view. In my experience it happens MUCH more frequently than that. I've seen nothing posted here that contradicts my experience.

While individual experience with 2.07 (and replacement projectors when 2.07 alone did not work) is limited, there are enough separate reports (all positive) to add up to a fairly convincing body of evidence. Remember that people don't post as much when things are fixed as when there is a problem. And, although an individual might not see the problem for some time, one person in a body of users will almost certainly see the problem within a few hours.

Am I 100% convinced that the problem is solved? No, but I am up to 98%.

It is one thing to be realistic and quite another to be pessimistic. Certainly, realism demands that one look objectively at both sides of an issue. Pessimism results when one always over emphasizes the negative side of an issue.

Are you SERIOUSLY considering purchasing one of these projectors? If you are, are you waiting until no one reports ANY problem for an extended period of time?
jmonier is offline  
post #12775 of 14938 Old 06-15-2019, 08:05 AM
Advanced Member
 
jmonier's Avatar
 
Join Date: Jan 2003
Location: Torrance, CA
Posts: 903
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 197 Post(s)
Liked: 113
Quote:
Originally Posted by abinav555 View Post
Kodi. NX7. V2.01. First time.
That is not the same as the "vertical lines" problem that is mentioned often here. It's hard to say what might cause that without more information. I'd update to 2.07 on general principles. Unless it happens frequently, it may be hard to troubleshoot. Posting such "bare bones" information is almost useless.
Craig Peer likes this.
jmonier is offline  
post #12776 of 14938 Old 06-15-2019, 09:11 AM
Member
 
LIPLASMA's Avatar
 
Join Date: Feb 2009
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked: 19
Projector Distance

I have tried several projector distance calculators online to determent were I should put my projector. The issue is none of them seem to agree with each other lol

I will be using a NX5 on a 120" screen with 8 ft ceilings, seating distance is 12ft if it matters. The room is 22ft long so I have no constraints there. I have seen anywhere from 16'10" to 18'1".

The drywall is going up next week and I need to put blocking on the joists for the mount this weekend.

Any advice would be appreciated.
LIPLASMA is offline  
post #12777 of 14938 Old 06-15-2019, 09:17 AM
Advanced Member
 
SirMaster's Avatar
 
Join Date: Aug 2009
Location: Wisconsin
Posts: 552
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 421 Post(s)
Liked: 432
Quote:
Originally Posted by LIPLASMA View Post
I have tried several projector distance calculators online to determent were I should put my projector. The issue is none of them seem to agree with each other lol



I will be using a NX5 on a 120" screen with 8 ft ceilings, seating distance is 12ft if it matters. The room is 22ft long so I have no constraints there. I have seen anywhere from 16'10" to 18'1".



The drywall is going up next week and I need to put blocking on the joists for the mount this weekend.



Any advice would be appreciated.


They should agree. Which ones are you looking at?

And what sort of measurement are you specifically looking for?
SirMaster is online now  
post #12778 of 14938 Old 06-15-2019, 09:26 AM
Member
 
Join Date: Dec 2014
Posts: 177
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked: 36
Quote:
Originally Posted by jmonier View Post
Quote:
Originally Posted by abinav555 View Post
Kodi. NX7. V2.01. First time.
That is not the same as the "vertical lines" problem that is mentioned often here. It's hard to say what might cause that without more information. I'd update to 2.07 on general principles. Unless it happens frequently, it may be hard to troubleshoot. Posting such "bare bones" information is almost useless.
True. This forum is extremely active and I uploaded this picture to see if other members could weigh in. I will however wait for this happen frequently before updating.
abinav555 is offline  
post #12779 of 14938 Old 06-15-2019, 09:33 AM
Member
 
LIPLASMA's Avatar
 
Join Date: Feb 2009
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked: 19
Quote:
Originally Posted by SirMaster View Post
They should agree. Which ones are you looking at?

And what sort of measurement are you specifically looking for?
You know what I went and rechecked and it was an error on my part between them didn't notice it. Thanks all good now.
LIPLASMA is offline  
post #12780 of 14938 Old 06-15-2019, 09:54 AM
Member
 
ckarabian's Avatar
 
Join Date: Apr 2004
Location: Irvine, CA
Posts: 64
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked: 11
Quote:
Originally Posted by jmonier View Post
That is not the same as the "vertical lines" problem that is mentioned often here. It's hard to say what might cause that without more information. I'd update to 2.07 on general principles. Unless it happens frequently, it may be hard to troubleshoot. Posting such "bare bones" information is almost useless.
I have had this specific issue happen twice upon start up of the projector. Starts up in Kodi on Shield with 2.07. Everything comes up green, but there are patterns in the display. Reseating the connection to the AVR via HDMI at the shield has gotten rid of it, but I have not really troubleshot it yet (i.e. start on other Apps, other devices) as it has happened two times where I actually need the projector due to a full theater!
ckarabian is offline  
Sponsored Links
Advertisement
 
Reply Digital Hi-End Projectors - $3,000+ USD MSRP

Tags
Jvc , nx7 , nx9 , rs2000 , rs3000

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off