That is true, but different countries have different laws. You are kinda stuck with what is offered and how it is offered.

That is really unfortunate that I can't fill my whole screen. Hoping that maybe through some future firmware upgrade the Zoom aspect could be fixed to work with 3D content.

I would think that is fairly unlikely to happen. Do you have an option to move the projector back a little? You mentioned moving from a different projector, and they do differ in terms of throw distance required to fill a given screen-size.

Unfortunately, I can't move the projector back a little in my situation. It's the first thing I had tried On a related note, do the Anamorphic modes A, B, C work with 3D? Just curious.

Is there a resource link for discreet remote control codes that I can use in irule to control the RS2000 projector. I want to make buttons that directly switch from Natural to Frame Adapt and my custom User 1 (which I can use for 3D).

I hate to be the bearer of more disappointing news, but Anamorphic C actually doesn't work perfectly with scope 3D content. I just added a DCR lens to my NX7, and it won't allow me to fill my screen side to side - there is a 6% horizontal squeeze. I would guess that Anamorphic D will work properly for 16:9 3D content, but I haven't confirmed that yet.

The fact that JVC didn't 'fix' Anamorphic C for 3D with the DCR lens is reportedly due to lack of horsepower in its electronics to handle it. That was actually why I indicated it to be unlikely that they would add Zoom compatibility for 3D.

Is there a resource link for discreet remote control codes that I can use in irule to control the RS2000 projector. I want to make buttons that directly switch from Natural to Frame Adapt and my custom User 1 (which I can use for 3D).

I got most of the above working using the irule database. The only one I'm missing is a direct code to switch to the new frame adapt mode. If some kind soul could provide me the Pronto Hex code to switch to the new frame adapt mode please?

I’ve had 2 DI issue and now this.

Did you figure out what was causing the issue? I am having the same issue with my X790 with 300 hrs on the projector. I am pretty sure this is a new issue and don’t recall seeing this in the past.

I emailed my dealer and JVC and will wait to hear back from them.

I did provide these codes a few pages back

Here is the code to select the Frame Adapt HDR picture mode:

\x21\x89\x01\x50\x4D\x50\x4D\x30\x42\x0A

I attach the reference document with all the new codes again (courtesy of @Mike Garrett ).

@Franin coxy replying to squidjammer as per above believe has x790 not n series. Plenty took issue with iris on previous gen though I was pretty happy. Not sure what issue Coxy is having

Thanks Al. One thing I have noticed when I stop a film and the projector goes into its black screen ( Hdmi handshake ) before going into Panasonic home screen the projector makes a noise is that Normal ?

Anyone ??



Sent from my iPhone using Tapatalk Pro

I asked my original question in another thread, but I thought it would also be helpful to seek advice from owners of the JVCs.

My wife and I visited an AV dealer the other night for the purpose of comparing Sony to JVC. This dealer had a 295ES and NX9 setup for viewing. Prior to the following experience, I was sure from my research I'd be purchasing an NX7....

While watching a recorded TNF Football game (DirecTV 4k), the fast motion viewed on the NX9 was awful, choppy/jittery. When the same programming was viewed on the 295ES, the fast motion was smooth and realistic. I was shocked that an $18,000 MSRP JVC would have such poor quality as it relates to sports or other fast motion programming, where the $5,000 Sony was immensely better. When I inquired directly to the salesperson he replied, "the Sony's have always had better video processing than the JVC's. Now, the mid range 695ES is my best seller and that is what I would highly recommend for you. That being said, I believe the AVR and HDMI cables hooked up to the NX9 are a bit dated and the DirecTV signal is split many times in our store. You may have a different experience with JVC at home."

I believe I have very sharp/sensitive eyes, but even my wife has admittedly bad vision commented that if we bought the JVC and Football or other sports looked like it did in the store, she would return it immediately. I also noted that the salesperson was trying to push the 695ES for much of the visit.

A few questions to consider:
1. For those of you who watch sports on their JVC, what is your experience? Did I just get unlucky in mine?
2. Is the video processing that much better on the Sony's that fast motion is perfectly processed whereas, in my opinion, unwatchable on the JVC's?
3. Were there settings on this particular NX9 that may have been inappropriate for viewing of sports content?
4. Is it possible the dated AVR and lesser quality HDMI cables would be a contributing factor?
5. For 70% movie viewing and 30% TV/Sports either streamed on 300/300 internet or viewed locally via OTA antenna, should I be purchasing a 695ES over the NX7?

If my specific questions aren't guiding enough, I guess my main question is, how "real" was my one time experience based on what you owners see on a day to day basis? This will be my first projector purchase and I want to make sure I'm buying the right unit for my situation.

Sounds like the iris...

Is that normal ?


Sent from my iPhone using Tapatalk Pro

If it’s going from a black screen that’s part of a movie to a non black screen, it is...

Thanks Al. One thing I have noticed when I stop a film and the projector goes into its black screen ( Hdmi handshake ) before going into Panasonic home screen the projector makes a noise is that Normal ?


Sent from my iPhone using Tapatalk Pro

wide filter in ... wide filter out ? wide filter will only be used for HDR WCG stuff pana home screen is not HDR WCG am pretty sure ?

Wide filter is on Al. Do you think that could be the filter as well ? Silly question Where is the filter on these projectors?

Ive never had a JVC with a filter so it’s all new to me.


Sent from my iPhone using Tapatalk Pro

the wide filter is dropped in and out as required. my x7000 was the same. for non HDR WCG stuff eg blu-ray and such it wont use it for HDR and WCG stuff eg uhd it will get plonked in ...probably noise hearing.

Thanks Al. One thing I have noticed when I stop a film and the projector goes into its black screen ( Hdmi handshake ) before going into Panasonic home screen the projector makes a noise is that Normal ?


Sent from my iPhone using Tapatalk Pro

Yes this is normal. Especially if you are playing HDR material and returning to an SDR screen. The noise you are hearing is probably the 2020 filter moving out of place and the DI moving.

I watched a Blu ray movie last night on the Panasonic still happens but I have the JVC on THX mode( Hasnt got many hours on proj yet )


Sent from my iPhone using Tapatalk Pro

And really, it's THREE surge protectors, since the UPS he mentioned also has surge protection. Seems WAY over the top to me?

just the way it works down under, it makes sense as dealer who you "deal" with its just that there are dealers and dealers some just shouldn't deal with

Question: Are User1, 2, etc...modes all calibrated as Natural to start with? Can I use one of them as my base for a 3D mode or custom 2D mode?

THX mode uses the filter.

THX mode uses the filter.