AVS Forum Special Member
Join Date: Feb 2000
Location: California's Redwood Coast
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 315 Post(s)
Originally Posted by vidwiz
My new receiver is downgrading the 4k 23hz YCbCr 4:4:4 10 bit output to 8 bit. Works fine when i bypass the AVR. Am I interpreting the specs correctly that it should support 10 bit?
HDMI IN1 to IN4:
• Copyright protection technology: HDCP1.4/HDCP2.2
• Color space (Color Depth):
– 720×480i 60 Hz, 720×576i 50 Hz, 720×480p 60 Hz, 720×576p 50 Hz,
1920×1080i 50/60 Hz, 1280×720p 24/25/30/50/60 Hz, 1680×720p
24/25/30/50/60 Hz, 1920×1080p 24/25/30/50/60 Hz, 2560×1080p
24/25/30/50/60 Hz, 4K (3840×2160p) 24/25/30 Hz, 4K SMPTE
(4096×2160p) 24/25/30 Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2
– 4K (3840×2160p) 50/60 Hz, 4K SMPTE (4096×2160p) 50/60 Hz : RGB/
YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit), YCbCr4:2:0 (8/10/12 bit)
Amp has zero setup parameters for deep color or anything similar. Cables test ok, hdr and resolution are ok, Oled has deep color enabled, the 8bit banding is the only problem.
When you write "works fine when i bypass the AVR" do you mean physically removing the AVR from the chain? Many AVR's have a "bypass" or "direct" mode for the video portion of the HDMI signal. That is usually the preferred method of using an AVR because it eliminates (or at least greatly reduces) the possibility of something in the AVR from distorting the video signal.
Good Viewing,John G JVC DLA-X790 Projector, Vutec 110" (16x9) Bright White Screen, Panasonic DP-UB420, Zappiti Mini4K HDR, Zidoo Z9s, Synology DS418 NAS, Yamaha RX-A2070 AVR, Toshiba 1250 NTSC-PAL Region Free BR Player, 7 Paradigm Reference spkrs w Dual Subs, & Yamaha 6600 External Amp