Zidoo is about to release its more affordable (than Zidoo X20) media players shortly. Zidoo Z9S & Z10
Will arrive with Android 7!
Will arrive with Android 7!
Shhhh... Don't let the Dune guys hear you.... Software of this player is better and more easy to use then Dune.
Just watch the clip half way through and has a few curious questions
@markswift2003 good info.
I just want to add from my previous research on this topic is that frame rate display from HDFury Vertex or any other device is most likely calculated back from pixel clock rate and screen resolution. It will be different for HD, 3D and 4K but will point back to 23.976fps.
More info here and follow second link.
The Zidoo seems to respect the HDMI specs correctly so you have to remember you can't output an illegal mode.@markswift2003 following your finding I decided to test it on my system. I have Zidoo X9S with latest firmware 2.1.14.
My standard settings are:
Deep Color Mode 10bit
Color Space Auto
HDMI Range 16-235
Looking at info screen from Zidoo player I always see 10 Bits and YUV444 for regular HD 1080p 8bit source and 10bit 4K HDR.
Changing Color Space to YCbCr 422 or 420 is not making any difference in the display output info from Zidoo player - always YUV444.
Is changing Color Space in Quick Settings from Auto to YCbCr 444, 422 or 420 effect display output frequency in any way?
Color Space in setup is marked in YCbCr but Player Info screen shows YUV. Are those two the same or not related in Zidoo terminology?
How did you change 444 to 422 and 420? Where do you see the change?
Bit depth is working fine. Setting 10 bit in setup forces 10 bit output across all sources HD and 4K HDR. Changes are reflected to 8 or 12 bit in Zidoo player info screen
It looks like Auto is just referred to maximum capability of the TV rather than automatically following the source.
Since I had it set for 10 bit and Color Space Auto it produces YUV444 and according to your research 23.974fps.
This is my standard set up and I do see microstutters
Can you check what is the frame rate / frequency on standard HD with output set for 10bit and 444?