AVS Forum | Home Theater Discussions And Reviews (https://www.avsforum.com/forum/)
-   Area Home Theater Meets (https://www.avsforum.com/forum/61-area-home-theater-meets/)
-   -   Hellllo northeast o.h.i.o members (https://www.avsforum.com/forum/61-area-home-theater-meets/1193648-hellllo-northeast-o-h-i-o-members.html)

tbase1 11-04-2009 08:43 AM

Hello Team,

It's time to setup a meet and go over some of the cool stuff that we all like to talk about but don't have anyone to talk to about with. I would like to reach out to all to see if we can set something up. My thought's right off the bat is to have a DIY and media extending meet. There's a lot of cool ideas out there that we need pull from to make our rooms look even better. Please let me know who's interested. I'm looking mid december or early january.

The Below is the proposed Agenda

1. DIY HTR treatments
2. DIY screens
3. DIY room decor.
4. Media extending
5. Member DIY support

Please feel free to add or revise the agenda via PM or posting

jaugustu 11-05-2009 04:09 PM

Hi tbase1.
Like i told you earlier, I'm all in for for the meet. It sounds like a lot of fun!

Speedskater 11-05-2009 05:38 PM

Are there just three of us remaining?

tbase1 11-05-2009 07:08 PM

No...we need to come together and search this thread and reach out to other northeast ohio members. There's a very long thread that was started last year that we can use to PM guys.

HD in Ohio 11-06-2009 07:41 AM

I'd be up for a meet. Sounds like a good time.


Carada CIH Masking System - First Impressions

tbase1 11-07-2009 03:54 PM

I think we need to reach out to some of the members directly. This can sometimes be a blackhole for posters once meets are over. However, once the posting starts it catches like wildfire.

fotto 12-06-2009 06:25 AM

I'd be interested in this meet.

g_bartman 12-13-2009 05:31 PM

Hey Tony. It's been a while. Sorry I didn't see this sooner.
I'm up for a meet. I know George (geocab) is still around too.
I was going to trey to have a gtg at my place (new townhouse) but didn't due to lack of interest.

Speedskater 12-14-2009 05:03 PM

I wondered where everyone had gone.

HOTDIGITY 02-08-2010 02:47 PM

Has anything happened as a result of this thread? I'd be intereseted. Definitely looking for local enthusiasts to trade tips and ideas, and see their setups!

fotto 02-09-2010 07:06 AM

Still seems like there at least a few NOH folks out there still on the forums. I'm still interested. Need a couple more to chime in.

g_bartman 02-09-2010 09:43 PM

If you know anyone in the area, send them a pm about this thread. Let's see if we can stir up some interest and get some meets set up.

geocab 02-10-2010 04:36 AM

I'm still around! I wish our area was as enthusiastic as the Michigan guys, I've been going to a lot of their meets. Good times!

Schedule something and I'm most likely in!

Speedskater 02-11-2010 02:56 PM

I'm still here, also!

lodit 02-12-2010 11:58 AM


Just got wind of this thread from g bartman.

I'm definitely in for a GTG to discuss HT setups and the like.

Let me know when it happens.



g_bartman 02-12-2010 08:56 PM

ok, time to get the ball rolling. I live in Berea. Could do a gtg Sunday, March 14th. (My wife has a wedding shower that day) Probably be a mid afternoon till early evening time frame. Who's in?

fotto 02-15-2010 09:41 AM

That date looks good for me.

spareho 02-15-2010 03:52 PM

i would be interested keep me posted on the date


g_bartman 02-15-2010 09:44 PM

I'll watch this for the next few weeks. If there is enough interest, I will plan a meet for sure with details.

HOTDIGITY 02-18-2010 10:05 PM

I'd be interested as well. Will need minimum of 3 weeks out to request off from my part time job, so I will keep an eye on this thread.

geocab 02-19-2010 04:25 AM

You know I am.

g_bartman 02-20-2010 07:57 PM

So far there seems to be enough interest so If you don't mind let me know if you plan to attend or not. I'm thinking about getting started at 2:00.
I have a lot of different sources to demo, I am definitly open to suggestions if anyone has anything spacific they want to see or hear. It would be good to exchange ideas, let us know what your system consists of and if there is anything you want to improve upon. I will have refreshments, snacks and beer. We can get pizza if anyone wnnts to stick around for a while. Again, please let me know if to PLAN to attend. I wont hold you to it but want to have a good idea. alrighty then....

jaugustu 02-20-2010 08:31 PM

I was just about ready to reply that I was able(and looking forward) to attend, But our swim team has their championship meet on the 14th. Maybe next time.

geocab 02-20-2010 09:18 PM

I'm in. Just send me a PM if the time is close and you haven't heard from me.

fotto 02-21-2010 05:30 AM

I'm planning on it. I'm 3/4 of the way through a dedicated room build and would like to discuss some audio components selection (amongst other things) since I have none at present.

tbase1 02-21-2010 12:42 PM

wow...it's pretty sad to start a thread on a meet and don't have one. Sorry...however, i'm on board for one or coming to one. Let's pan the forum for other memebers to invite if it's alright with you guys. new setup listed below

1. pannny ae4000
2. isco IIIL anamorphic lens
3. sintra pvc DIY scope screen
4. sammy up5000 hd-dvd/blu-ray player
If you like I'm open to work with you on a meet agenda?

g_bartman 02-21-2010 01:13 PM

If you like I'm open to work with you on a meet agenda?

Shure. I guess I'm agendaless.

tbase1 02-21-2010 03:40 PM

What about using some of the items on my original post. I would also be open to a CIH scope discussion also. Given the amount of 1080p projectors that's leaning towards that, it could be goog to put that on the agenda. Does anyone have any additional thoughts on an agenda?

HD in Ohio 02-21-2010 06:49 PM

I'm in as well. Thanks for getting this going.

I'm completely ignorant when it comes to Media Extending - talking about this and seeing it in action would be very helpful.

I would be very willing to host a subsequent event. Like tbase, I run a CIH system. Mine's a little different in that I use the Prismasonic A-lens and Carada's masking system. It would be great to see the differences in the choices we've made with our installs...

I'm in Bath, by the way, so not too far from Cleveland.

lodit 02-22-2010 07:42 AM


March 14th sounds good. Put me down for the meet. And you're only about 1/2 hour away. Nice.

All times are GMT -7. The time now is 09:35 PM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.