Originally Posted by PabloReiter
I am getting ready to pull the trigger on my purchases of screen and projector.
I am looking at a 144” wide (156 diag) 16:9 non perf 1.3 gain screen. Would this work on the rs4500? I am assuming it will have to be in high laser mode. The projector will be 11 ft back from the seating position. Temperature in the room will not exceed 73 deg. I would like to avoid a hush box but one is possible. The projector will sit 29ft back from the screen, at the limit of its throw.
What is everyone’s opinion. I cannot go any smaller than a 132” wide (145 diag). If you were me what screen size would you get between 144 and 132 wide for this projector?
I think you'll be able to get away with mid laser on this to be honest especially if you set up a dynamic tone mapping for HDR input like madvr / lumagen or if JVC adds it to the firmware.
Video: JVC RS4500 135" screen in pure black room no light, htpc nvidia 1080ti.
Audio: Anthem mrx720 running 7.1.4, McIntosh MC-303, MC-152, B&W 802d3 LR, B&W HTM1D3 center, B&W 805d3 surround, B&W 702S2 rear, B&W 706s2 x 4 shelf mounted for atmos, 2 sub arrays both infinite baffle: 4x15 fi audio running on behringer ep4000 + 4x12 fi audio running on 2nd ep4000.