Onkyo TX-NR3030 - Page 9 - AVS Forum | Home Theater Discussions And Reviews
Forum Jump: 
 25Likes
Reply
 
Thread Tools
post #241 of 250 Old 09-18-2018, 08:36 PM
Senior Member
 
mobileES's Avatar
 
Join Date: Jan 2009
Posts: 227
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 49
Been grabbing some Hi-Res Audio files from the net. Does anyone know why the USB port has limited supported sampling rates of FLAC files? Manual says sampling rates of 176.4 kHz and 192 kHz are not supported.

Has anybody connected a Hi-Res Audio device to this AVR?

Dolby Atmos 7.1.4 | Samsung 65" 4K KS8000 Series | Samsung UBD-K8500 UHD Player | Sony DVP-S7700 DVD Player | Onkyo TX-NR3030 Atmos Network Receiver | Energy Veritas 6.3 mains | Energy C-C1 center | Energy C-R100 surround sides and backs | (4) Energy Take Classic satellites heights | Velodyne VA 1215 XII Sub
mobileES is offline  
Sponsored Links
Advertisement
 
post #242 of 250 Old 12-22-2018, 01:15 PM
Newbie
 
zornikbe's Avatar
 
Join Date: Aug 2010
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked: 0
Onkyo TX-NR3030 no sound from hdmi

Hello folks,


I've received my early christmas gift from Onkyo ...
No more hdmi audio for me.

The AV receiver does however shows me all the speakers icons, but no sound.
Is this a reflow candidate or do I need to solder a new part ?

Any DIY advice you tech's can give me ?


Thanks Yves
zornikbe is offline  
post #243 of 250 Old 12-22-2018, 01:46 PM
Senior Member
 
Join Date: Jul 2016
Location: WA, USA
Posts: 390
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 182 Post(s)
Liked: 70
Have you check any other digital inputs/sources?
Quote:
Originally Posted by zornikbe View Post
Hello folks,


I've received my early christmas gift from Onkyo ...
No more hdmi audio for me.

The AV receiver does however shows me all the speakers icons, but no sound.
Is this a reflow candidate or do I need to solder a new part ?

Any DIY advice you tech's can give me ?


Thanks Yves

XBR55X700D/Optoma UHD60
Denon AVR-X8500H
14 Gigaworks S750 Cubes
Acoustimass 15 Series 2 Sub
Too much to list here :)
Anh Nguyen is offline  
Sponsored Links
Advertisement
 
post #244 of 250 Old 12-22-2018, 09:50 PM
Advanced Member
 
Lozin's Avatar
 
Join Date: Mar 2015
Posts: 692
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 337 Post(s)
Liked: 163
Quote:
Originally Posted by zornikbe View Post
Hello folks,





I've received my early christmas gift from Onkyo ...

No more hdmi audio for me.



The AV receiver does however shows me all the speakers icons, but no sound.

Is this a reflow candidate or do I need to solder a new part ?



Any DIY advice you tech's can give me ?





Thanks Yves


That’s happened on my 1030 a few times. All I had to do was do a factory reset and that fixed it both times it’s happened to me. It will wipe out all your settings so if you try it write them down beforehand.


Sent from my iPhone using Tapatalk
Lozin is offline  
post #245 of 250 Old 12-23-2018, 05:42 AM
Newbie
 
zornikbe's Avatar
 
Join Date: Aug 2010
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked: 0
Tried all of the above and nothing ...


Factory reset => no effect
Other HDMI inputs and outputs => no effect


I only get sound from non HDMI sources, like USB, network streaming, tuner, ...
The TX display also shows me the correct audio format.
zornikbe is offline  
post #246 of 250 Old 01-25-2019, 02:57 PM
Newbie
 
Join Date: Jan 2018
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked: 0
Onkyo TX-NR3030

Highlights/Specs:
*11.4 channels of power (allows up to 7.4.4 setup!)
*Dolby Atmos processing
*THX® Select2™ Plus Certified
*135 Watt (per channel) @ 8 Ohms
*185 Watt (per channel) @ 6 Ohms
*Wide Range Amplifier Technology (WRAT)
*HDMI 2.0 for 4K Video at 60 fps, and HDCP 2.2 Compatibility
*Separate Block Construction
*Dual 32-bit DSP Engines for High-Resolution Audio
*192K/32 Bit DACs (TI Burr-Brown 2ch x 7)
*4 subwoofer outputs (2 Pre-outs)
*Built-in Ethernet, Bluetooth (2.1 + EDR) & Wi-Fi® (802.11b/g/n)
*Spotify, Pandora, SiriusXM Internet Radio, Slacker, AUPEO! and TuneIn
*DLNA 1.5
*Three HDMI Outputs for Multizone Video
*4K Video Upscaling and ISF Calibration
*MP3, WMA, FLAC, WAV, Ogg Vorbis, AAC, Apple Lossless, LPCM and DSD up to 5.6MHz
*Mobile High-Definition Link (MHL)
*InstaPrevue Input Source Prevue
*Marvell Qdeo (30p) Upscaling
*Multi-Zone Audio and Front Channel Bi-Amping
*11.4 pre-outs, balanced XLR pre-outs, VGA PC input and powered/line outputs
*Built-in fan
*Signal-to-Noise Ratio: 110 dB (Line, IHF-A)
*Power Supply: AC 120 V, 60 Hz
*Weight: 48.5 lbs (22.0 kg)
*Dimensions (W x H x D): 17 1/8" x 7 13/16" x 18 3/8" (435 mm x 199 mm x 466.5 mm)
*Warranty: 2 years (from Onkyo)
Attached Thumbnails
Click image for larger version

Name:	rear.jpg
Views:	148
Size:	59.3 KB
ID:	2516168  
anibalc80 is offline  
post #247 of 250 Old 07-30-2019, 05:50 PM
Senior Member
 
mobileES's Avatar
 
Join Date: Jan 2009
Posts: 227
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 49
Strange thing I noticed the other day, the AVR has the LPF set to 120hz, so I set the bypass switch on the sub. When I flip that switch to use the sub's internal filter, which is set to 120hz as well, more bass is produced. Should be the same I'm thinking?

Also, in 2.1 Stereo mode, the bass volume is a lot lower than in All Channel Stereo.

Wondering if there is something wrong with my AVR....

My sub is a Velodyne VA-1215XII.

Edit: Nevermind, plugged in my 2nd Velodyne, same settings, switch the bypass/internal x-over switch on the sub, no difference in volume. So it seems the issue is in the bypass switch on my 1st sub.

Dolby Atmos 7.1.4 | Samsung 65" 4K KS8000 Series | Samsung UBD-K8500 UHD Player | Sony DVP-S7700 DVD Player | Onkyo TX-NR3030 Atmos Network Receiver | Energy Veritas 6.3 mains | Energy C-C1 center | Energy C-R100 surround sides and backs | (4) Energy Take Classic satellites heights | Velodyne VA 1215 XII Sub

Last edited by mobileES; 07-30-2019 at 09:00 PM.
mobileES is offline  
post #248 of 250 Old 12-01-2019, 02:57 AM
Newbie
 
Join Date: Dec 2019
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked: 0
Onkyo TX-NR3030 doing 7.4.2 Atmos?

Hi all,

I have an Onkyo TX-NR3030, and recently managed to get a few THX speakers, 4 Atmos speakers and a subwoofer extra (All Onkyo)

The Onkyo is an 11.2 device, and I would like to setup the speakers in a 7.4.2 configuration (In essence using all the speakers I have got).

As the Onkyo isn 't really recent anymore (I know it can do Atmos), I wonder if the device will actually let me setup the speaker configuration in a 7.4.2 setup...

I hope that someone here can confirm this and maybe give me some pointers what to think of when setting it up like that...

All the speakers are THX certified (except for the Atmos probably). and I am also not too sure whether I should use optical or just use the HDMI ports for best results?

I am not ver knowledgable in this area, so any input from you is appreciated 🙂

Thanks in advance for your help!
FredsterNL is offline  
post #249 of 250 Old 12-01-2019, 05:50 AM
Newbie
 
Join Date: Dec 2019
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked: 0
CORRECTION: Onkyo TX-NR3030 doing 7.2.4 Atmos?

Oops, messed up the order: I meant 7.2.4 (2 subs, 4 atmos)
FredsterNL is offline  
post #250 of 250 Old 12-02-2019, 08:59 PM
Senior Member
 
mobileES's Avatar
 
Join Date: Jan 2009
Posts: 227
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked: 49
Quote:
Originally Posted by FredsterNL View Post
Oops, messed up the order: I meant 7.2.4 (2 subs, 4 atmos)
This shouldn't be problem, during the sound calibration setup it checks if there is a 2nd sub. I've ran 2 subs off of it before just experimenting.

Dolby Atmos 7.1.4 | Samsung 65" 4K KS8000 Series | Samsung UBD-K8500 UHD Player | Sony DVP-S7700 DVD Player | Onkyo TX-NR3030 Atmos Network Receiver | Energy Veritas 6.3 mains | Energy C-C1 center | Energy C-R100 surround sides and backs | (4) Energy Take Classic satellites heights | Velodyne VA 1215 XII Sub
mobileES is offline  
Sponsored Links
Advertisement
 
Reply Receivers, Amps, and Processors

Tags
TX-NR3030

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off