I just have to add here, since a lot of feedback comes from people without any knowledge (they have never tried!). Isotek products work. Just set up a complete Isotek (Titan EVO3 + Sigmas EVO3 + Sirius EVO3) on my HT. Already have Sigmas EVO3 on one of mye headphone setups; and Aquarius EVO3 on the other. The difference is dramatically for the better. There is a lot of crap on you power (generated by all the components hooked up, surrounding wifi-networks and neighbors). Isotek does not kill the dynamic range (as most power conditioners do), and you get lower noise floor; better separation of instruments and much clearer dialogue on movies . In short, you get the best from your equipment (there are no magical voodoo here).
I have still never heard any equipment not benefiting from a good power conditioner. Don't listen to feedback from others (including me); try yourself. My hifi-dealer allowed me to borrow and try for a few weeks with no cost.
Common Mode and Differential Mode mains noise is a reality. You could of course stick your head into the sand and pretend it is not so. We also have people claiming there are no difference between different DACs as well, and of course - all amplifiers are the same.....
HT: Trinnov A32 (AL32-1632)/AMP8/8M - BRYSTON 4B SST2 - B&W 802D3, 803D2, 2*DB1, HTM2D2, 804D2, SCMS, Nautilus SCM1, 805D2 - NORDOST Heimdall2/Frey2 - ISOTEK EVO3 Titan,Sigmas - LG OLED65B7V - GIK ACOUSTICS
HP: 2*MOON 430HA D, 2*MiND2 - 2*Yggdrasil - 2*Hydra Z/ZPM - ISOTEK EVO3 Sigmas, Aquarius - NORDOST Heimdall 2 - AUDEZE LCD-4 rev2, 2*LCD-XC - SHURE SE846 - Bose NC 700
Last edited by Berland; 01-01-2017 at 08:02 PM.