There are at least 100 universal remote models I know of that will fully control your projector.
- Your model is in the Harmony database, so any Harmony will control it
- It's in the JP1 database, so any JP1 remote will control it (includes One-for-all, Insignia and most cable and satellite OEM remotes)
- Pronto hex and JP1 codes can be calculated from the protocol document linked below. So any remote that takes pronto hex can control every possible function of your projector (hundreds more universal remote models).
Here's the JP1 upgrade:
(must log in to download then use Remote Master to view/load)
If you encounter any wrong or missing commands, you can calculate the correct JP1 or pronto hex codes from this document (see page 23 for the procedure):
List of JP1 remotes:
As you can see from the attached manual, the following projector models all use exactly the same codes. So any non-universal remote for any of those models should give you much of the functionality you need.
DLA-RS1 ● DLA-RS2
DLA-HD350 ● DLA-HD750
DLA-HD550 ● DLA-HD950 ● DLA-HD990
DLA-X3 ● DLA-X7 ● DLA-X9
DLA-X30 ● DLA-X70R ● DLA-X90R
DLA-RS10 ● DLA-RS20
DLA-RS15 ● DLA-RS25 ● DLA-RS35
DLA-RS40 ● DLA-RS50 ● DLA-RS60
DLA-RS45 ● DLA-RS55 ● DLA-RS65