rsvr79 rsvr79 is offline
|10:59 AM - J_P_A mentioned rsvr79 in post The Plains Theater
rsvr79, I'm a little concer...
|11:02 PM - asarose247 mentioned rsvr79 in post About to jump into the deep-end on DIY! Need some recommendations.
... good riddance rsvr79 is preaching a good ...
|10:21 AM - Mike Schacht mentioned rsvr79 in post Bass Traps : How many and where to place them
... a phase problem. rsvr79 and Tip24/96 I'm not...
|01:15 PM - dtsdig mentioned rsvr79 in post The Dtsdig Curvy-Cab Tux-1099 build!!
rsvr79 I wouldn't need aco...
|05:18 AM - rsvr79 mentioned pgwalsh in post All of these ottomans got me thinking
...rdingly. Check out pgwalsh's thread at http://w...
|09:51 AM - rsvr79 mentioned LTD02 in post What fasteners are you using for big drivers?
...ood won't suffice. @LTD02 did the math once. ...
|04:21 AM - rsvr79 mentioned dtsdig in post Has anyone ceiling mounted anything as large as fusion 8's?
dtsdig has ceiling mounted ...
|06:45 AM - rsvr79 mentioned Boxozaxu in post Recomendations on small 2.1 set up
...ll computer system, Boxozaxu is building a set of...
|09:15 AM - rsvr79 mentioned squiers007 in post Getting ready to set up my first good sub, got a couple questions
squiers007 makes Martysub flat ...
|10:39 AM - rsvr79 mentioned squiers007 in post Live pro audio speaker questions
...ake a look at what @squiers007 has done in his gym....
|11:36 AM - Boxozaxu mentioned rsvr79 in post Should I continue with subs in columns?
...nd suggestions from rsvr79 I'm starting to thin...
|04:46 PM - rsvr79 mentioned LTD02 in post Shallow SIHT18 ported sub
....png After reading LTD02's method for extendi...
|05:02 AM - rsvr79 mentioned pgwalsh in post Deleted Posts
|04:55 AM - rsvr79 mentioned pgwalsh in post Creating diy sound bar by placing three volt8s in the same enclosure (isolated in the
However, pgwalsh's drawing would work...
|11:34 AM - rsvr79 mentioned dgage in post Convince me to go DIY for my subs
...interested, talk to dgage. http://deepseasou...
|11:21 AM - rsvr79 mentioned d_c in post Subwoofer for our church?
...ake a look at what @d_c did with his Gjallar...
|10:06 PM - rsvr79 mentioned EricH in post 7.1(2) system at a budget
...lder. As a note, EricH is running low on ce...
|02:30 PM - rsvr79 mentioned chalugadp in post 7.1(2) system at a budget
...o Integrity HT18's, chalugadp has a thread about b...
|12:47 PM - rsvr79 mentioned chalugadp in post 7.1(2) system at a budget
...do some looking for chalugadp's thread on Martysub...
|02:36 PM - rsvr79 mentioned chalugadp in post DIY or prefab?
...You'll want to read chalugadp's thread on setting ...
|05:40 AM - cdy2179 quoted rsvr79 in post Another Build Thread with no name!
What frequency range does t...
|09:02 PM - rsvr79 quoted hd0823 in post Another Build Thread with no name!
This is a bad panel. What ...
|07:00 PM - dtsdig quoted rsvr79 in post Hey Designers, SEOS or Coax designs for outdoors?
I have to wonder what effec...
|09:05 AM - 18Hurts quoted rsvr79 in post I finally did it! Just ordered 3 HTM-12's!!!
You can get the 893 in a ce...
|07:07 PM - rsvr79 quoted 18Hurts in post I finally did it! Just ordered 3 HTM-12's!!!
I'm in the same boat My fur...
|05:31 PM - rsvr79 quoted HT Geek in post The Final Frontier Theater
Apparently. Either that or m...
|05:27 PM - HT Geek quoted rsvr79 in post The Final Frontier Theater
The first picture makes the...
|03:58 PM - rsvr79 quoted HT Geek in post The Final Frontier Theater
I spent considerable time (a...
|07:00 PM - rsvr79 quoted diy speaker guy in post Result of running lower than RMS
This phrasing removes about a dozen ...
|06:30 PM - diy speaker guy quoted rsvr79 in post Result of running lower than RMS
In general, running two spe...
|09:23 PM - Hertzsogood quoted rsvr79 in post About to jump into the deep-end on DIY! Need some recommendations.
The Volts are not controlle...
|05:35 PM - rsvr79 quoted 18Hurts in post 8" Tapped Horn to 20Hz in 11"x25" MAX footprint? Is it possible?
5 out of 4 people have probl...
|08:19 PM - Roger Dressler quoted rsvr79 in post The Beast, Unleashed
It's a very interesting set...
|07:23 PM - rsvr79 quoted Roger Dressler in post The Beast, Unleashed
To be precise, this is not the same...
|07:05 PM - rsvr79 quoted asarose247 in post Matching the Fusion-12 with the 88 Special
and space constraints ?, on a ...
|07:17 PM - rsvr79 quoted corradizo in post Nexus by Matt Grant
Wow, would love to hear about ...
|06:31 PM - corradizo quoted rsvr79 in post Nexus by Matt Grant
It wouldn't surprise me if ...
|05:03 PM - rsvr79 quoted Erich H in post Nexus by Matt Grant
A new website has been plann...
|07:08 AM - Tip24/96 quoted rsvr79 in post The "Iwata 215Be's" info and build thread
Would something like a bull...
|06:58 PM - Scotth3886 quoted rsvr79 in post Audiophile grade speaker wire
That's because the physicis...