bitmap42 bitmap42 is offline
|09:58 PM - notfastenough mentioned bitmap42 in post Need HELP! Barely any sound
...And as mentioned by bitmap42, be sure to adjust t...
|02:11 PM - bitmap42 mentioned tuxedocivic in post How easy are HTM 12, Fusion 15 etc to build
...the sound quality. tuxedocivic did a comparison of ...
|02:10 PM - bitmap42 mentioned tuc in post How easy are HTM 12, Fusion 15 etc to build
And that is how we get t...
|01:58 PM - bitmap42 mentioned tuxedocivic in post First Projector and DIY 1xx" AT Screen
... Tapatalk JRock, tuxedocivic did a great write up...
|01:01 PM - thesmileman mentioned bitmap42 in post The V.B.S.S. DIY subwoofer design thread
Augerhandle and bitmap42, Thanks sooo ve...
|08:10 AM - bitmap42 mentioned unretarded in post First Time Buyer Sanity Check
...is very similar to unretarded but I used 1x3s. I d...
|05:54 PM - bitmap42 mentioned dTorC4 in post Model a sub for me, please
dTorC4, here are the best i...
|05:51 PM - bitmap42 mentioned LTD02 in post Model a sub for me, please
...t instructions by LTD02 http://www.avsfor...
|04:07 PM - bitmap42 mentioned mtg90 in post New DIYSG speakers: HTM-12 and HTM-10
...e answer hopefully mtg90 can chime in, but wi...
|12:20 PM - bitmap42 mentioned eng-399 in post Comparing DIYSoundGroup Designs
... to attend a GTG at eng-399's and it is very har...
|03:52 PM - bitmap42 mentioned tuxedocivic in post DIY Center, L, R Channel Questions
... are mostly Ryan's tuxedocivic designs, hopefully h...
|06:49 AM - bitmap42 mentioned DaleNixon in post Been out of the loop, what's the best bang for buck setup these days?
...rison. I second DaleNixon's suggestion to use ...
|06:49 AM - bitmap42 mentioned eng-399 in post Been out of the loop, what's the best bang for buck setup these days?
...tand upright. eng-399 had a GTG a few year...
|11:41 AM - asarose247 mentioned bitmap42 in post DIYSG 88 Special build
...gnus” courtesy of bitmap42. http://redirect....
|12:53 PM - bitmap42 mentioned LTD02 in post Daytons new PR's
...g, and then pull in LTD02 to shoot it down! ...
|08:32 AM - bitmap42 mentioned LTD02 in post DIYSG LCR + 2x Sub Advice
...f the big guns like LTD02 or mtg90 to give a r...
|08:32 AM - bitmap42 mentioned mtg90 in post DIYSG LCR + 2x Sub Advice
... guns like LTD02 or mtg90 to give a recommenda...
|11:31 AM - IAccord99I mentioned bitmap42 in post DIYSG LCR + 2x Sub Advice
bitmap42 Thanks! very clearl...
|11:58 AM - michaelddd mentioned bitmap42 in post Can the exit for a vent exit the side of the vent instead of the end of the vent?
Thanks, bitmap42 I appreciate the det...
|09:09 AM - bitmap42 mentioned mtg90 in post Can the exit for a vent exit the side of the vent instead of the end of the vent?
... the port). I think mtg90 used the back of the...
|08:28 PM - Viche quoted bitmap42 in post THE Epson 5050UB/6050UB Thread
The easiest way to find the c...
|11:53 AM - Utopianemo quoted bitmap42 in post DIYSG Titan 615LX vs Boston Acoustics VR3
...his thread(not you, bitmap42), it seems to be get...
|07:49 PM - SpinMonster quoted bitmap42 in post DIYSG Titan 615LX vs Boston Acoustics VR3
So there are two options to m...
|01:37 AM - Jon AA quoted bitmap42 in post DIYSG Titan 615LX vs Boston Acoustics VR3
A “perfect” speaker would...
|08:07 PM - bitmap42 quoted Jon AA in post DIYSG Titan 615LX vs Boston Acoustics VR3
Let's see if this helps: ...
|01:40 PM - bitmap42 quoted SteveCallas in post DIYSG Titan 615LX vs Boston Acoustics VR3
Switched layout to BABA and swit...
|08:48 AM - noah katz quoted bitmap42 in post HTM-12 should I use a center?
I haven't tried toe-ing in th...
|06:49 PM - bitmap42 quoted ezelkow1 in post THE Epson 5050UB/6050UB Thread
Also just found this from the...
|01:56 PM - bitmap42 quoted doodoobutter in post HTM-12 should I use a center?
I'm trying to decide between goin...
|02:07 PM - bitmap42 quoted nintari in post Spandex Screen Planning, Full Marty(s) behind...
Something I didn't think of ...
|01:58 PM - bitmap42 quoted Muphasta in post upgrade to 20+ year old Klipsch RF-3 and RC-3 speakers
Is there a tower you could th...
|09:22 AM - bitmap42 quoted Randy Moon in post 88 Special with 15LX MBM
The MBM I would build would use...
|04:35 PM - remme quoted bitmap42 in post Need HELP! Barely any sound
[QUOTE=bitmap42;57488284]Did you try...
|02:45 PM - bitmap42 quoted remme in post Need HELP! Barely any sound
I just hooked up my Crown ...
|03:17 PM - bitmap42 quoted awblackmon in post Spandex screen review.......
I had an odd thing happen with ...
|03:41 PM - yakapo quoted bitmap42 in post New Epson Pro Cinema 4050
Lots of much cheaper options!...
|02:57 PM - bitmap42 quoted Jameshtx in post New Epson Pro Cinema 4050
How do you calibrate to get b...
|12:06 PM - bitmap42 quoted ctsv510 in post EPSON Pro Cinema 4050 4K HDR Projector First Impressions- CEDIA 2018
Can you really tell the diff...
|07:47 AM - bitmap42 quoted Bytehoven in post Raising / Lowering fixed screen?
I'm looking for a solution to ...
|07:51 PM - apilon quoted bitmap42 in post First DIY screen - help
The goal is to have a solid f...