Search Results for ‘7.1’

I have a setup currently in my bedroom consisting of (all Polk Audio) RTI A3 fronts, a CS2 center, T15 surround backs (mounted about 6 feet off the ground on the back wall), and two TL1600 satellites as surrounds either side, along with a PS10 Sub. I just recently added the smaller satellites...

I have a setup currently in my bedroom consisting of (all Polk Audio) RTI A3 fronts, a CS2 center, T15 surround backs (mounted about 6 feet off the ground on the back wall), and two TL1600 satellites as surrounds either side, along with a PS10 Sub. I just recently added the smaller satellites...

Is there an app for Apple TV (4th gen/A1625) that will allow me to play content (or even a test pattern) that is known to be DD+ 7.1? When I set my receiver to MultiCH PCM, everything from the Apple TV shows up as 5.1. All the movies on Netflix/HBO/Prime seem to be 5.1 or Atmos, and this...

I have an Apple TV HD (A1625) and its best/Auto output format is PCM -- which as far as I can tell is supposed to support ("contain"?) Dolby Digital Plus (7.1). The Pioneer reports that the input signal is PCM, and so then Dolby Digital Plus is not a selectable listening mode. Dolby Surround is...

Integra DTR-50.7 7.2-Channel Network A/V Receiver: The gateway to Integra’s high end, the DTR-50.7 features Three-Stage Inverted Darlington Circuitry and separate construction for truly dynamic performance. Seller Notes: Buyer pays shipping Rack mount included No remote (RC-901M) or AccuEQ mic...

Welcome to the official 2022 Samsung S95B QD OLED Owners Thread! See second post for extra info from S95B owners that may be helpful. My order is in! My first OLED TV! I'll be comparing it to Samsung's QN90B and last years QN90A. Details & Specifications: Neural Quantum Processor with 4K...

I have the Lossless video file of the Texas Instruments DLP trailer, that you see in the pre show of the commercial theaters even today. This is not the YouTube version which is not in Dolby. It's in Dolby 7.1 "SCOPE" format. This file used to be on Demo World and is no longer available there...

I have been slowly upgrading my HT theatre setup. It is located in our living room and is not a massive space, but it is open on one end to the right. Anyways, I upgraded to a set of PSB X2T towers and love them, they are powered by a NAD275BEE Power Amp that is incredible. I am running a...

"OFFICIAL" 2017 Denon "S-Series" / "X-Series" AVR Owner's Thread + FAQ (Posts 1-8) 2017 Denon AVR models ---> S530BT/S730H/S930H/X1400H/X2400H/X3400H/X4400H/X6400H The Denon + Marantz Group (ie. D+M Group) USA has started to release information on the new 2017 Denon models starting with...

Hey all. Just unboxed my new TX-NR676 and plan to set it up tonight. So I figured I'd start an "official owner's thread." New this year is Chromecast built-in and DTS Play-Fi and Dolby Vision support coming via firmware update. TX-NR575 Details on Onkyo's Site TX-NR676 Details on Onkyo's Site...

7 channel 140 watt/channel at 8 ohms 20-20,000 Hz not more than 0.09% THD. Subwoofer preamp output. THX Ultra2 Certified. Class D amplifiers. Easily wired for 5.1 and 7.1...

I have a Marantz SR 7015 with a 6.1.2 (5.1 + L and R Atmos, and one additional center back surround) speaker setup. I can playback Atmos and 7.1 encoded content. I’d love to be able to playback either format, but with all speakers working. So, Atmos + my center back surround, or 7.1 + Atmos...

Hi all, looking for a bit of advice here on my home theater speaker setup. I have an HDTV with a 7.1 system. L/C/R speakers are in-wall at appropriate listening height. Because of the open concept in my room, the rear/surround speakers had to go in-ceiling. As mentioned above, I've just been...

For those of us that have 7.x setups (seven main listener-level speakers, an undefined number of subwoofers, and zero overhead/ceiling, height, nor up-firing speakers), is the addition of two overhead/ceiling, height, or upward-firing speakers an improvement? Maybe someone cannot afford an AVR...

Hi, I've got a Denon AVC-X4700H, and since a few days it started to recognize 5.1 Signals as 7.1 (uncompressed, PCM, Bitstream) (This happens on Nintendo Switch, but also on XBox Series X) No matter if i set it to 5.1 or 7.1, the AVR always shows 7.1 This leads to the Problem that i can no...

I have searched the whole internet but I haven't found anything. I know that I am gonna get shut down with "Just use stereo it doesn't make a difference" but I have heard it make a different in other peoples setup. I would like to use atmos through my headphones I have been doing some...

Greetings, This is my first post here. I hope my questions make sense. I did my best to provide as much information as possible and will answer any question for complementary information. So here it goes. Background When building my house 8 years ago, I reserved a room in my basement to...

Hello Everyone, I hope you are all having an amazing day. I am currently running 5.1 and looking to upgrade to 7.1. I have attached a sketch of the Living room. Is there a way that i can put side speakers either to front or back of the sofas since the right side is entry to kitchen? Sofas are...

Hello. Excuse me for a long post. I am struggling to position surround speakers (SL, SR, SRL, SRR) in our multipurpose game room which is 30' L x 21.5' W x 12.5'H. Shape is not rectangular as it has a BAR and a closet on one side, entrance door is a largish french doors (double) on a 45 deg...

Hi all, First post on the forum! So I'm looking to upgrade my Wharfedale Diamond 10.1 pair. They've been great, lovely sound and no real need for a subwoofer with their low frequency response. I'm currently running them on a vintage 1993 Sony amp, the TA-F270. I wanted to upgrade the whole...