AVS Forum banner
7.1.4
1-17 of 17 Results
  1. Receivers, Amps, and Processors
    Hello All, I have a Denon x3700h and an older Yamaha v2095 receiver that I want to use for my 7.1.4 setup. My Speakers: 2x Fronts: 4ohm (Emotiva T0+) 1x Center: 4 ohm (Emotiva (C2+) 2x Rear: 8 ohm (Emotiva E2+) 2x L/R Surrounds: 8ohm (Emotiva E2+) 4x Heights: 8ohm (Sonance MAG6R) The Denon...
  2. Receivers, Amps, and Processors
    I am setting up a new 7.1.4 Dolby Atmos system in my living room, and would like some input on how to power it all. I have a 77 LG OLED for a display and Triangle Borea fronts (2 x BR08 and BRC1) and surrounds (4 x BR03) with RSL height speakers (4 x c34e). I am either getting the Denon 11 ch...
  3. Speakers
    I’m running into a placement issue with my speakers. I’m planning on using KEF in wall speakers for front LCR, side surround speakers and ceiling atmos speakers. For the rear speakers, will use a pair of KEF bookshelf speakers. The issue is the side surround speakers. Because of a window on the...
  4. Speakers
    I'm building a house and need to decide what wiring I want to have installed in the Media Room. The room is 10.5x11.5. I would like to be able to sit at least 6 people in there which would require 2 rows of seating with the back row against the wall. The attached diagram shows what 2 rows...
  5. Speakers
    From the AVS Forum archives (posted June 2017)... Dolby Atmos is understandably popular with the home theater crowd, thanks to the height effects 3D immersive audio provide. From flyovers to raindrops on a roof, having sounds come from above is more realistic than traditional two-dimensional...
  6. Speakers
    Hello guys, I am building a basement theater with 7.1.4 atmos setup. For 4 atmos ceiling - I am going with RSL C34E For 6 surround speakers - I am planning to go with B&W CWM663 For subwoofer - I am thinking of SVS PB-1000 For center channel - B&W HTM6 Receiver - Yamaha AVENTAGE RX-A3080...
  7. Audio Theory, Setup, and Chat
    Hi everyone, I'm planning to move to a bigger apartment and evaluating to build my first home theatre setup. I've been studying the dolby/atmos speakers placement guide and reading quite a lot setups on this forum, and finally did some drawing to understand which setup fits better in my room...
  8. Receivers, Amps, and Processors
    Hello, I have been toying with the idea of going from 7.1 to 7.1.4 later on (7.2.4/11.2). I wanted to hear from those of you running a 4 speaker height setup if it's a really big difference between 7.1 to 11.1 surround, which is basically adding 4 height channels to a 7.1 set up...
  9. Receivers, Amps, and Processors
    Say hello to the Rotel RAP-1580 ($3800), a seven-channel integrated amp that sports 11-channel surround-sound processing. It decodes Dolby Atmos as well as DTS:X object-based immersive audio formats and aims to offer the performance of a system based on separate components in a single chassis...
  10. Speakers
    Hey guys, call me nuts, but after looking at Dolby's recommendation for the atmos front height speakers between 35-55 degrees, I'm a bit perplexed as that could put the front atmos/height speakers anywhere from 2 ft in front of my listening position, to close to 6ft away from my main listening...
  11. Dedicated Theater Design & Construction
    The Learning Curve - 9.4.4 New Construction - Feedback Needed Hi All, First post here, but I've been haunting the forums for a few years now as this project has progressed (steady by jerks!). I really appreciate the wealth of knowledge and I've tried to incorporate best practices from here in...
  12. Speakers
    Immersive-audio systems such as Dolby Atmos and DTS:X have expanded the audio horizons of AV enthusiasts by adding a third dimension of sound to the home-cinema experience using height channels. The question that confronts anyone embarking on this endeavor is whether to install speaker in/on...
  13. Latest Industry News
    Last year, there was only one 11-channel AVR on the market. This year, there are several. With Dolby Atmos and DTS X gaining in popularity, Pioneer has taken the logical step of introducing an AV receiver that offers 11 built-in channels of amplification. Now, it's possible to use an Elite...
  14. Speakers
    Dolby Atmos represents one of the most important innovations in movie sound since the introduction of surround. In addition to speakers in front and to the sides—and perhaps in the rear—Dolby Atmos employs speakers above the listener as well. Mixing engineers now have the creative freedom to...
  15. Receivers, Amps, and Processors
    Just ran through this list, I am waiting for more information on these SC-LX901 11Ch SC-LX801 9Ch SC-LX701 9Ch
  16. Receivers, Amps, and Processors
    I was hoping someone here could help me. I just installed 4 in ceiling speakers for atmos with a 7.1.4 config. I was going to buy an Emotiva amp for my fronts but the one I want is discontinued and unavailable so I have to wait for their new series. For the time being I hooked up as 7.1.2...
  17. Speakers
    Hi, Thanks for reading this post. This is my first one on the forum. I am not an audiophile by any means. I do know the more you listen, the more you would appreciate good speakers. Just auditioned Martin Logan at Best buy. I have heard B&W at a friends place. Martin Logan at best buy. I can...
1-17 of 17 Results
Top