I'm planing to build home theater with JTRs but not able to decide right amp. On JTR website they are saying recommended amplification 2000 watt RM (program) which I'm not able to understand. If anyone please shed a light on this "(program)" thing and suggest some amps having a bit...
im running the setup below and it just doesn't hit as hard as I would like. I have a feeling this system is under powered and would like a recommendation on how to improve.
10" CompC 4 Ohm SVC
CX300.1 Mono Amplifier
Hi all, new member here. I bought a home with a dedicated home theater room with all the equipment set up and now I'm furiously learning everything I can about all things AVS. Some of the equipment looks outdated.
I have two RBH sa400 subwoofer amplifiers that are daisy-chained (wires run from...
For sale is my NAD M32 Integrated Amplifier. Unit includes the BluOS, HDM1, and AP1 modules. All of these modules were additional and make it so the M32 can accept almost any type of connection. You do not get any of these modules with a new unit. An M32 in this condition which...
For sale: NAD M22v2. Unit is in great condition. I would rate it 9/10 only because it is not new. Looks like it was just our of box. Used in an dedicated pet-free, smoke-free, adult-only HT setting. Has worked great but deciding to go in a different direction for my set up. Have the...
Hi All - wife and I are building a new house and have finalized a speaker plan. I will state there are limitations beyond my control (WAF) and what's pictured below for speakers is indeed final. Looking for advice on how to control all of these speakers efficiently given the following:
Im looking for a used NHT SA-3 amp to run my NHT 3.3 subs. I know they are discontinued but I can't find one anywhere. Does anyone know where I can purchase one? I'm willing to pay a decent amount for one. If I can't get my hands on one, would an SA-2 work? Thanks in advance.
Original Owner. Amplifier used in dedicated home theater. Overall light use. 2-3 movies per month. Smoke-free, pet-free home. All original packaging. Unit is in excellent condition. Additional pictures available upon request.
PM me with questions and/or interest.
***ROTEL is still available
(SOLD) Emotiva XPR-2 Amp 800.00
(SOLD) Monster Pro AVS 2000 Power Conditioner 300.00
Rotel RB1080 Amp 500.00
I acquired the high end audiophile equipment from my late father. I hate to sell but have been out of work for awhile and I have extremely limited...
For Sale Outlaw Audio 5000. In perfect condition. With original packaging. Under warranty till August 17th, 2023.
Price - $500 OBO + Shipping + Transaction Fee (if any)
The unit will ship from 94080.
Dimensions - 24 x 24 x 15
Weight - 55 lbs
Good afternoon folks!
I need some help with amplifier recommendations. I have Triad in wall speakers.
I am running a 7.2.4 setup (my 2 subs are already powered).
My Bronze 4 Triad LCRs are being powered by a Proceed 3 AMP-3 amplifier (250w /ch at 4ohms).
I got a good deal on an Outlaw Audio...
I recently picked up a Velodyne subwoofer for free. I brought it home and plugged it in. It turned on and looked like everything was working but there was a loud humming noise and when i put audio in to it something on the amp began to click when it hit harder bass notes. Is there a way i could...
It's time for an upgrade, and I'm torn as usual between so many options, but I thought asking all of the fine folks in the community for some suggestions.
Current 5.1 Setup:
Speaker Mains: Salk Veracity STs,
Center: Salk SCST center channel
Surround: Salk WoW1 monitors
Sub: SVS PB12-NSD...
Posting another question since.. getting into the higher end of things, I'm starting to get a little confused on what I need and don't need.
I am going to be upgrading to Polk Legend L200 for front L/R and a Polk L400 for the center.
(surrounds will be Polk Monitor...
I have an Sony STR-DH590 receiver for my simple home theater. The home we purchased has five builtin Bose speakers which are all connected and are working, however the manual indicates that to use the Auto Calibration, one needs an ARC compatible TV which I do not have. Is there any work-around...
As a hobby I am starting to play with making panel speakers and trying different materials, shapes, finishes and so on.
So far a friend of mine and I setup stereo flat panel system using:
2x compressed wood floor boards
2x DaytonAudio DAEX32EP-4 (32mm 40w exciters, 4-ohm...
Hi there, I know this is probably a long shot because the technology is so old but I thought I would try get some advice.
I had a MZC66 installed in my house in 2007 with 6 zones and as time has passed, a minor issue has occurred. The Mode base docking station appears to be working with the...
I am thinking about purchasing this Western Electric speaker from eBay (item number 184354652441) and would like to know how I would connect it to an amplifer, looking at the back of the photo it looks like it has taps like a line voltage system; if it is does it just have a transformer inside...
So recently one of the Rotel and B&W dealers has a had a sale and the Rotel A14 caught my attention as it was marked down quite a bit.
To give a background I currently have the old Rotel RA-12 + Denon 4500h+ Paradigm Studio 20 v5 bookshelves + PB4000 sub and I love this setup. I love Rotel's...