AVS Forum banner
balun
1-8 of 8 Results
  1. Tweaks and Do-It-Yourself
    Bought a house that has a dedicated AV closet with Cat5E cables running from cabinet to where TV will be hung. Approximately 75' from AV receiver and components to where TV is hung. AV closet has window where antenna can be for OTA signal, is there a way to run signal from closet to TV to use...
  2. Home A/V Distribution
    Hey Everyone, I have a home theater room that myself and a friend put together. I did this about a year ago and had been running everything with a long HDMI cable going through my attic and down the wall to a plate that connected to my receiver. It worked fine, but I wasn't ever getting true 4k...
  3. Home A/V Distribution
    My friend's parents are building a new house and have commissioned me to design a simple AV system that will serve their basic needs: 1. Distribute HD cable to 4 TVs with the boxes stored together in the basement rack 2. Distribute 1 channel of whole house audio to their selected "entertaining...
  4. HDMI Q&A - The One Connector World
    I have my AVR in another room from my TV. I have Cat6 running between them. probably 70 feet of ethernet. My understanding is to get 60fps 4:4:4 4k, hdbaset baluns has to perform some lossy compression...which i'd like to avoid. (& the baluns are very expensive!). i think HDMI 2.1 might...
  5. Networking, Media Servers & Content Streaming
    Baluns over IP I'm looking for a couple of baluns that can run over Ethernet. Not Cat5e/Cat6, but over Ethernet. I have a few drops where there's a single Cat5e cable and at each of them I'm already using them for my LAN. So I've been looking for some sort of IP encoders and most are over...
  6. Home A/V Distribution
    Hello, I am at my wits end. I have tried 4 different sets of HDMI baluns, 2 passive, 2 active. The picture shows up great, but there is not any audio. End Equipment: Bell (Echostar) 6400 Box Panasonic TC60CS540 TV Infrastructure: 2 x cat5 (verified pinouts) all different types of baluns...
  7. Tweaks and Do-It-Yourself
    Hello Everyone, Just to give everyone a heads up, I am new to this. I recently moved into new construction and had the home wired the way that I thought was best. Essentially, I have four cat 6 wires and one coaxial cable in every wall I thought I would want a tv at and it all homes runs to the...
  8. Digital Projectors - Under $3,000 USD MSRP
    Wasn't sure what forum this question fit in but because I'm terminating the connection in a pair of sub $3000 projectors, I'm listing it here. Feel free to point out a better location... Here's a rough idea of my setup : MacMini(MiniDP) --> Matrox DualHead2Go(DVIx2) --> Projectors 1 & 2 (HDMI...
1-8 of 8 Results
Top