Hi, I hope yall can help me!
I have a BenQ W1070 that I used for a couple years before it just stopped working and wouldn't even power on (not a bad bulb or any error code signaled).
The repair shop said it needed a new main board. They replaced it and it worked.
- The lens is off...
It was all good, all fine for the last two years.
And then after a 48 hour hiatus, there is no image.
On switching on,
LAMP goes Red
POWER goes Green
And it beeps back into cooled down state waiting to be switched off.
First off apologies if this has been covered off on another thread, I have searched and could not seem to find anyone with a similar problem.
I am using a Macbook Air 2013 model running OSX 10.8.2 with a mini Hd video connection to HDMI lead (the name of the cable may be slightly...
I've always wanted to have more than an LCD and speakers for my bedroom turned man cave/office. But like many, I thought the space was too small. After tons of research, I figured out my layout and equipment with a very limited budget.
Here is my equipment list.
BenQ w1070 projector...
I have been reading a lot on this forum since buying a projector (BenQ W1070) and now it is time a sound system. (I should add that the video is coming from a RPi running rasbmc. It would also be nice to add an Xbox and Gamecube)
My dad wants to buy a Bose Lifestyle 525. At first I was also...
Just bought the BenQ W1070, but I have problem that the blue color is wrong in some places. for example from Hawaii Five O of blue lightning from policecar on Danny, see picture (sorry for bad quality, but I hope you see the problem). How can I do something with this?
I am a newbie to the home theatre projectors. I've done quite a bit of research and learned alot, but after a certain point it all just gets confusing. So I am coming to you experts. Sorry if my questions is a stupid one.
I am looking for a home theatre projector for my apartment...
So, in looking for projectors over the years, I've always ran into the problem of ceiling height. My theater room is my former garage, and the ceilings in there are about 8 feet and 1 1/2 inches. In my situation, ceiling mounting the projector is an absolute must. So this really limits my...
I have been doing quite a bit of research to find a suitable projector to replace my Acer 5360. Nothing wrong with it but I just have the "itch" to upgrade to 1080p. After a very bad experience, not to mention several hundred dollars of loss when reselling it, with Epson 3020 (compared to Acer...
Unit-to-unit sample variations, the viewing environment, and the source might render these recommendations less than optimum. They are provided only as a potentially useful starting place.
The settings here that are most likely to translate reliably from one sample to another are...
If given the choice which projector would You chose. The 3020 has around 500 hrs on it and is covered by warranty. I have some light in the room I am going to use the projector. I will watch 3d blurays on it.
A few years ago I bought a Sanyo PLV-Z700 on eBay. It was my first projector; I was a projector newbie, and I have been thrilled with my purchase and experience. The price was definitely right as I got it for less than $800. This thing still wows visitors to my home for night viewing.
I have my mount directly centered of screen. My right side of screen is slightly shorter than my left side of screen.
Am I suppose to center the lens to the screen or the whole projector? Its a 1070 benq with no horizontal lens shift.
Is this the reason my screen isnt square?
TL;DR version: I currently have both projectors setup in my basement. They are shooting on a bare white wall located 12' away. I have 3 weeks to decide which one to keep before the 30day return policy is up. I am susceptible to rainbows on DLP projectors.
Long winded, NFL has now started and...
I just recently purchased the W1070 and I can't play any devices through the HDMI connections.
*I tried a blu-ray player and got video, but I couldn't get sound.
*I tried another blu-ray player I had and I couldn't get a picture or sound, but the projector showed that it detected a source...
Upgrade fever has taken hold and I'm trying to figure out what to pull the trigger on. The W1070 is a contender but I don't know if I'm rainbow sensitive or not and I can't find anywhere to demo one of these.
If you have one would you consider letting check it out for a few minutes...
I have an opportunity to buy Epson 8350 for 2D viewing only for a good price (let's just say sub-$1000) and am trying to decide whether I should jump on it or pass.
I only watch 1080p content (.MKV) sourced from Blu-Ray encoded at a high bit-rate.
I use Acer 5360 (720p) + NVidia for...