AVS Forum banner
broken
1-20 of 21 Results
  1. Receivers, Amps, and Processors
    Hi, The On/Off switch on my 4308CI broke as it wont stay in the on position. Removing the faceplate I see there is a white and yellow wire going to the On/Off switch. If I connect.these two wires will I set the AVR to be able to power on? With the lighted power switch ? Thank you
  2. Receivers, Amps, and Processors
    My Pioneer VSX-1024 stopped working properly last year. Something happened to the surround channels and all that I get now is very low, crackly output from them. Now all I have is stereo at the front A-zone and stereo on the B-zone speakers. Centre and surrounds are hooped. I bought it because...
  3. Remote Control Area
    Any idea where i can find tv remote controls, that have flaws (plastic could be scratched or cracked)? Usually such parts are sorted out of the production line and are sold cheaper than the brand new ones. I know that here are fridges or washing machines sold that way but im not certain about...
  4. Speakers
    I have a wireless transmitter (picture below) for surround sound speakers that uses spring clips to connect speaker wire. Two of the top halves of clips have broken off and the spring came out, leaving the other halves of the clips stuck in the ports. I got the connections to work by moving...
  5. Subwoofers, Bass, and Transducers
    Hi, I have a Jamo J12 sub rated as following: Frequency Response 27Hz - 120Hz Crossover Frequency 40-120Hz I was messing around with some settings with the crossover (on the receiver, Denon X1300). On the sub it was maxed out, but when I clicked on 200Hz the subwoofer gave a loud popping...
  6. Digital Projectors - Under $3,000 USD MSRP
    Hi, I recently bought a used iCodis CB-800 in hope of being able to repair it. However, I've had no luck. The problem is that the projector will start, switch its light on, and then immediately turn back off again. I've tried flashing a new firmware over USB, but I can barely find ANYTHING on...
  7. Receivers, Amps, and Processors
    I have a Logitech Z-5500. I like it pretty well. Yesterday, it stopped working. Specifically, everything on the unit looks good, but no sound comes out of the speakers. Test mode appears to cycle through speakers on the control pod's display, but the speakers are silent. (Yes, the volume is...
  8. Plasma Flat Panel Displays
    So I borrowed a Panasonic Viera TH-37PV60E from my in-laws for my dorm room. They recently bought a new device and the old one was just sitting in the attic. I moved it to my dorm two days ago. While watching a movie (from laptop, HDMI) there was a small audible 'bang' and the right side of the...
  9. Speakers
    Hello all. First time reader/poster but I am having problems with an older Sub. for a year or so it has been in my closet, but to the best of my memory there was no problem with it last time it was stored. Its the Logitech z2300, I got it for free years ago from a friend who was moving. I...
  10. Receivers, Amps, and Processors
    Hi, I am very new to this forum, so please pardon any improper etiquette. So I have a Denon AVR-S500BT Receiver for my polk tower speakers. This receiver was refurbished and came with both a guarantee that it worked as well as a warranty from Denon. Out of the box, I plugged it in and a red...
  11. LCD Flat Panel Displays
    I just got a Samsung UN60KS8000 it's brand new. I watched a movie and turned the TV off. Worked great. When I returned and powered on the TV the screen is black but it looks like the backlights are on. I can also hear sound from the menus, which i can't see. I have tried unplugging it, and...
  12. Home Theater Computers
    This post relates to issues when bitstreaming from HTPC via HDMI to an AV Reciever with an Nvidia GPU handling the audio via HDMI. Nvidia driver later than 355.60 does not work (at least up to 368.22 where I had issues, but likely also after that) Previously this year both Dolby TrueHD and...
  13. Receivers, Amps, and Processors
    Hi guys. I don't post much here but I lurk a lot. You guys are what I hope to be one day. I'm just a broke college grad trying to make it in the world and recently I had a problem come up. My Denon AVR-1612 (which has been a great starter receiver) was gearing up for a night of Netflix when I...
  14. Receivers, Amps, and Processors
    Sad day. I'm not yet sure if it is repairable but the SC-27 seems to be dead. All of the controls work, the front panel display gives no indication anything is wrong but no sounds comes out of my speaker or subwoofer. Yes, the speakers are ON, it is not muted, and no other setting have been...
  15. DVD Recorders (Standard Def)
    I've had this DVR since May 2011 and today I noticed it was completely off even though it's usually always plugged in and on. When I tried to soft reset the DVR it only partially worked at first by making a strange clicking and whirring notice with the DVD drive, not allowing me to look at any...
  16. Subwoofers, Bass, and Transducers
    my behringer b1500 is not powering on and no audio playing, the power LED and limit LED are flashing on/off along with a 'tick' from the subwoofer itself. ive tried replacing the fuses both on the sub itself and the power cable plug. does anyone any suggestions?
  17. Receivers, Amps, and Processors
    Hello everyone, I'm new to the forum and this is my first post. I purchased a second hand Lexicon MC-1 over a year ago and it has been operating perfect up until recently where the unit will not even POST. I've replaced the power supply with a brand new one to no avail and still have the...
  18. Subwoofers, Bass, and Transducers
    So last week I bought a new 15" 600 watt skytek subwoofer to add to my PA system. At a gig on saturday night I hooked it up to my 2 channel 2800w amplifier. As expected, it now no longer works, and when I opened it I could smell something burnt. So what actual part is broken and how can I get it...
  19. Receivers, Amps, and Processors
    I have a Denon AVR 1803 Surround Reciever that is broken. I turn it on using the front switch and all that comes on is the red standby light, no display. I have looked online to see if there are any solutions but the only sources i've found says there could be a fault with the macro-processor...
  20. Plasma Flat Panel Displays
    So my roommates and I just purchased a 65 inch samsung plasma from someone in the area for, wait for it, 175 dollars. The tv works great and was hardly used. He was selling it because a child's toy was thrown at the bottom of the display and put a small 2 inch crack in it. no plasma has escaped...
1-20 of 21 Results
Top