For sale a new HSU CCB-8 Center channel Speaker that is basically new. I have moved to floor standing speakers and selling both this center channel as well as HSU HB-1 MK2 bookshelf speakers. This forum has all the praise for HSU speakers, I feel there is no better value at the moment in audio...

Among all the CES2019 it is easy to miss that there is a new "computer" speaker on the block from no other than JBL Professional: http://www.jblpro.com/www/news/news-detail/2019/01/09/jbl-professional-introduces-one-series-104-compact-powered-reference-monitors I certainly would like to put...

Hi avsforums, My subwoofer has low frequency inputs, (two RCA inputs, l/r) not an lfe, at the moment I am using the red cable from the RCA pair going from the red input on the sub to the lfe input on the receiver. I need to buy a longer cable for placement of subwoofer, there's a really nice...

I just bought a Blu-Ray player with just coaxial digital output for audio, and I need a quality D/A converter so that I can listen to CDs through my legacy amplifier. Are there any decent quality converters out there for under $100? I see a lot of options in Amazon, but not sure about the quality.

Hello My USB > Coaxial (Peachtree Audio X1 Asynchronous 24/192 USB to SPDIF Converter) broke and I'm looking to replace it. I stream FLAC music from my computer to the...

Hello , I-We have a "bad" coaxial cable " that starts in our basement and off a (replaced splitter ) the "bad " cable end is upstairs in master bedroom . Spectrum checked it out got a reading of 10% of required signal for a cable box . Goal is to reduce-remove internet load as using a 2010...

Hello folks I want to know which port is maximum used in your two channel audio setup? Why? USB: Asynchronous transfer for Mp3 and high resolution audio from PC. Coaxial: From BD/CD player. Optical: From BD/CD/TV/Steaming media/Satellite receiver/Apple airport express airplay etc. Analog...

Hi Guys, I am in the middle of acquiring the parts (I'm from South Africa) one would need to build a DIYSG Fusion 12 Tempest and looking at DIY forums especially I can't help but wonder if I should try and pursue a build with a Tannoy driver, ultimately as I already have some of the parts and...

I'm looking for a digital audio switcher that will handle 6 or more sources to a single output. A matrix is not necessary and will just run up the cost, but if that's the only option, I will consider it. Must-haves: Output must be coaxial Both coaxial and TOSLINK for the inputs (although not...

My receiver is a Rotel RSX-1067. It has two optical inputs and three coaxial S/PDIF inputs, the only way to get digital audio into it and utilize its fantastic DACs. It's only 5.1 that way instead of 7.1 (yes, a 7.1 receiver without HDMI) unless you use one of the weird 6.1 direct or 7.1...

I just installed a Clearstream 4 rooftop antenna pointed towards the TV transmitters. (Live about 15 miles southwest of DC) The pre amp I went with is the Winegard Boost XT and I have used Monster RG6 coax cables. I have a single 6 ft cable running from the antenna to the pre amp, a 100 foot...

Hi All, I am planning to buy a basic 5.1 ch home theatre system to be used for outputting audio from my tv, set top box, movies played through the laptop connected to tv, etc. I have a basic full hd led tv: www dot hisense.co.za/tvs/D36/50/0 I am planning to buy a home theatre system in box...

I'm working on a friend's house boat and have come to a challenge. Here's the set up..... 1 Direct TV, standard def box stored on the deck. It has a coax out to a 2 way splitter. One side sends the signal to a tv on the deck, and the other side sends the signal to a tv in the master bedroom...

I typically limit myself to the field of computer networking / programming / IT systems, but recently got talked into helping a desperate client with improving their RF cable video system. In a nutshell, they operate a campground where coaxial CATV is available at a number of their campsites...

Hi guys, I'm going a bit crazy here, it's my first post as this is first time I cant find solution myself.. even though it seems so trivial.. so please help, throw in any ideas. Anyways: I have RCA LCD TV which I'm simply trying to connect to my Yamaha receiver with coaxial digital cable. I've...

Hello all, I have a problem at my hand, i have a digitized learning material and i need to stream this videos through media content management system in a scheduled manner each day to Panasonic plasm TVs(coaxial) across each class room and also on demand on the laboratory Thin Clinets...