AVS Forum banner
dayton audio rss390hf 4 15 reference hf subwoofer 4 ohm
1-16 of 16 Results
  1. DIY Speakers and Subs
    Hi, I'm hoping someone over here at avs can help me out. I been trying to get answers at DIYaudio and HT shack in the threads I originally started for this build, but all of the sudden no one is responding. I built a sealed RSS390HF in 4.2ft^3. I'm powering it with a NU3000DSP. I can't seem...
  2. DIY Speakers and Subs
    Hello, Don't know particularly much about subwoofer building. After reading a few hundred threads here I decided to ask for some advice. Wife allows me to build two (sealed) boxes, downfiring configuration, no sharp edges etc. Will be using Dayton 15" HF subs. Thing is, I can't listen at...
  3. DIY Speakers and Subs
    I built a THT-LP for my home theater last year after hearing all the rave reviews of the output of this design. Yes, it delivers some thunderous bass, but I find it to be to soft for my liking. I want to feel the bass yes, but I also want it to be tight, clean sounding, and reach deeper. I used...
  4. Audio Gear
    These subs have never been opened. They're 100% brand new. I bought these from parts express for $350 to build my own sonotube subwoofer. I never got around to making the subs and ended up buying one from my local speaker shop. I'll do $299 bucks for the pair. I'll also pay for shipping as long...
  5. DIY Speakers and Subs
    so shipping for the Dayton 18 for where I live is $104 for a total of $354 for one. on ebay I can get free shipping on Dayton rss390hf-4 at $172 can have two for a total of $344 I already bought the amp a epx2800 which way should I go? my goal is for max [email protected] have room for large boxes...
  6. DIY Speakers and Subs
    Hello kind Sirs, this may be a bit involved for most 1st posts, but I have parts on the way and need to bounce a couple ideas off some knowledgeable people. I want to get some advice and some validation on my ideas and numbers. I want a 7.1 or 7.2 system. Not sure I want 10hz-16Khz +-3db at...
  7. DIY Speakers and Subs
    Hi all I'm in the process of building a new HT and I have 4 Dayton RSS390HF 15" subwoofers that I got a good price. My initial thoughts are to build 2 dual opposed sealed boxes using these drivers, and place them behind the screen wall near the corners. My other option of course is to place...
  8. DIY Speakers and Subs
    I want to use 1 of my 2 Daytons RSS390HF-4 15 for outdoor use w a pair of B&W WM6. Subwoofer will be 100% music. I need to know if they are weatherproof,specially sun resistant. I also need a recommendation for some type of weatherproof paint for the cabinet. Please help me make this possible...
  9. DIY Speakers and Subs
    I'm looking to build a DIY sub, as I've seen that they can outperform much more expensive ones for a lower cost, but I have no access to a table saw or the ability to store huge amounts of MDF. Is there some kind of a DIY kit that I can just paint the box and plug in the amp and screw in the...
  10. DIY Speakers and Subs
    Hello all !!! I'm thinking of doing a 'two 15" speaker setup' driven by two Behringer ep2000's each bridged to 4 ohms, 1 per sub. I'm possibly going with Dayton RSS390HF-4 drivers ported and tuned to 20 Hz. I looked at the TC Sounds LMS-R and a JBL but like the curve in WinISD on the...
  11. DIY Speakers and Subs
    First off I wanted to thank everyone here for their input's and teaching me a little something about speaker building. This is my first project. 22" cube, double baffle, 4.3 ft^3 cube with a Dayton 15" HF. The final box didn't turn out as good as I would have liked. Only having a borrowed...
  12. DIY Speakers and Subs
    Anyone have both these drivers? Do the mounting holes match up? F-20 use.
  13. DIY Speakers and Subs
    Hello! Does anyone have any links for plans to a 3cu ft sealed box for a Dayton RSS390HF-4 15" sub and an Oaudio BASH 500 amp? I've done a lot of google searching and didn't come up with any actual plans, just peoples projects. I have a neighbor who is a carpenter who can help me cut the box if...
  14. DIY Speakers and Subs
    Well which one would be better for the ht environment? I can only have one sub for now and I'm worried the HF would run out of steam. I felt I was getting close with my av15h. I prefer a cab between 4-6 cubes. Power will be from a oaudio 500 or the like. Are the obsidian offerings good for ht...
  15. DIY Speakers and Subs
    I want to build a subwoofer that is in the $400-$500 range. I will probably be purchasing the oaudio 500W bash amp. I want to accomplish 20hz-17hz fla, but I don't want a huge box, would prefer sealed if its an option. I want the best size/performance possible for size is an issue. I am very...
  16. DIY Speakers and Subs
    With the MFW-15s gone from circulation, I thought I would start a thread that speaks about specifically using the Dayton RS-15 HF (RSS390HF-4) in lilmike's F20 cabinet. This is the driver I have purchased for the four F20s that I am building. lilmike suggests only putting 300W through this 500W...
1-16 of 16 Results
Top